FCC ID UCC-C22221000

C2s Dual-band 2x2 802.11ac WiFi AP/Bridge

by Altai Technologies Limited

Grantee Code: UCC   Product Code: C22221000
Latest application date: 2016-07-13

Device Images

FCC ID Device Details

FCC IDUCC-C22221000
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeUCC
Product CodeC22221000
Applicant BusinessAltai Technologies Limited
Related Domains altaitechnologies.com
Equipment ClassC2s Dual-band 2x2 802.11ac WiFi AP/Bridge
Test FirmShenzhen Tongce Testing Lab

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2016-07-13
5745-5825 MHzOriginal Equipment2016-07-13

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2016-07-13PDF 471.6 KB
Internal PhotosInternal Photos2017-01-09PDF 1,012.8 KB
Internal PhtotosInternal Photos2017-01-09PDF 1,012.8 KB
External PhotosExternal Photos2016-07-13PDF 537 KB
LabelID Label/Location Info2016-07-13PDF 213.4 KB
Label Info/LocationID Label/Location Info2016-07-13PDF 213.4 KB
Test Setup PhotosTest Setup Photos2016-07-13PDF 150 KB
Test Report pt 1Test Report2016-07-13PDF 5.5 MB
Test Report pt 1Test Report2016-07-13PDF 4.4 MB
Test Report pt 2Test Report2016-07-13PDF 4.9 MB
Test Report pt 2Test Report2016-07-13PDF 4.9 MB
AuthorizationCover Letter(s)2016-07-13PDF 36.2 KB
Confidentiality RequestCover Letter(s)2016-07-13PDF 49.6 KB
RF ExposureRF Exposure Info2016-07-13PDF 37.9 KB
Block Diagram Metadata onlyBlock DiagramPDF 51 KB
Schematics Metadata onlySchematicsPDF 303.7 KB
Operational Description Metadata onlyOperational DescriptionPDF 704.5 KB
UNII Security Description Metadata onlySDR Software/Security InfPDF 1.2 MB
Parts List Metadata onlyParts List/Tune Up InfoPDF 52 KB

Application Information

Application IDMDib4M4OHTm9+WOTCbVipw==
Final Action Date2016-07-13
Application PurposeOriginal Equipment
Applicant FRN0015152226
ModelC22221000
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionC2s Dual-band 2x2 802.11ac WiFi AP/Bridge
Responsible PartyLawrence Leung, Product Engineering Manager, khleung@altaitechnologies.com , 852-2116-8087
Technical ContactJoe Zhou, Shenzhen Tongce Testing Lab, joe.zhou@tct-lab.com , (86)75536638142
Test FirmCharlle Lai, Shenzhen Tongce Testing Lab, 184199833@qq.com , 15112400427
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date01/09/2017
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is maximum combined output power. The device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons. End-users and installers must be provided with installation instructions and operating procedures for satisfying RF exposure compliance. Device supports 20/40 MHz bandwidth modes.

Applications

Application IDDatePurpose
MDib4M4OHTm9+WOTCbVipw==2016-07-13Original Equipment
5VC8v4bys5yQXrfrUe6tBQ==2016-07-13Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.500000015CCC, MO
5745-5825 MHz0.240000015E38, CC, MO

Grants

TCB Grant - Application MDib4M4OHTm9+WOTCbVipw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 07/13/2016

Application Dated: 07/13/2016
Altai Technologies Limited
Unit 209, 2/F, Lakeside 2,
10 Science Park West Avenue, HK Science Park,
Shatin,
Hong Kong
 
Attention: Lawrence Leung , Product Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UCC-C22221000
Name of Grantee:  Altai Technologies Limited
Equipment Class: Digital Transmission System
Notes: C2s Dual-band 2x2 802.11ac WiFi AP/Bridge
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.5  

Output power listed is maximum combined output power. The device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons. End-users and installers must be provided with installation instructions and operating procedures for satisfying RF exposure compliance.

Device supports 20/40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application MDib4M4OHTm9+WOTCbVipw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Altai Technologies Limited
Unit 209, 2/F, Lakeside 2, 10 Science Park West Avenue, HK Science Park,
Shatin,
Hong Kong
  Date of Grant: 07/13/2016

Application Dated: 07/13/2016
 
Attention: Lawrence Leung , Product Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UCC-C22221000
Name of Grantee:  Altai Technologies Limited
Equipment Class: Digital Transmission System
Notes: C2s Dual-band 2x2 802.11ac WiFi AP/Bridge
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.5  

Output power listed is maximum combined output power. The device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons. End-users and installers must be provided with installation instructions and operating procedures for satisfying RF exposure compliance.

Device supports 20/40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 5VC8v4bys5yQXrfrUe6tBQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 07/13/2016

Application Dated: 07/13/2016
Altai Technologies Limited
Unit 209, 2/F, Lakeside 2,
10 Science Park West Avenue, HK Science Park,
Shatin,
Hong Kong
 
Attention: Lawrence Leung , Product Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UCC-C22221000
Name of Grantee:  Altai Technologies Limited
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: C2s Dual-band 2x2 802.11ac WiFi AP/Bridge
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5745.0  -  5825.0 0.24  

Output power listed is maximum combined conducted power. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons. End-users and Installers must be provided installation instructions and operating procedures for satisfying RF exposure compliance.

Device supports 20/40/80 MHz bandwidth modes.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 5VC8v4bys5yQXrfrUe6tBQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Altai Technologies Limited
Unit 209, 2/F, Lakeside 2, 10 Science Park West Avenue, HK Science Park,
Shatin,
Hong Kong
  Date of Grant: 07/13/2016

Application Dated: 07/13/2016
 
Attention: Lawrence Leung , Product Engineering Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UCC-C22221000
Name of Grantee:  Altai Technologies Limited
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: C2s Dual-band 2x2 802.11ac WiFi AP/Bridge
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5745.0  -  5825.0 0.24  

Output power listed is maximum combined conducted power. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons. End-users and Installers must be provided installation instructions and operating procedures for satisfying RF exposure compliance.

Device supports 20/40/80 MHz bandwidth modes.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: