1. FCC ID
  2. UDV
  3. UDV-1103022011008

FCC ID UDV-1103022011008

GSM/GPRS/EDGE/WCDMA/HSDPA module

by Shanghai Simcom Ltd.

Grantee Code: UDV   Product Code: 1103022011008
Latest application date: 2011-06-17

FCC ID Device Details

FCC IDUDV-1103022011008
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeUDV
Product Code1103022011008
Applicant BusinessShanghai Simcom Ltd. 🇨🇳
Related Domains sim.com
Equipment ClassGSM/GPRS/EDGE/WCDMA/HSDPA module
Test FirmQuieTek Corporation

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
824.2-848.8 MHzOriginal Equipment2011-06-17

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2011-06-17PDF 3.4 MB
Internal PhotosInternal Photos2011-06-17PDF 91 KB
External PhotosExternal Photos2011-06-17PDF 173.4 KB
LabelID Label/Location Info2011-06-17PDF 522.2 KB
Block DiagramBlock Diagram2011-06-17PDF 186.3 KB
Test Setup PhotosTest Setup Photos2011-06-17PDF 197.9 KB
Test ReportTest Report2011-06-17PDF 1.7 MB
Confidentiality request letterCover Letter(s)2011-06-17PDF 43.6 KB
RF Exposure InfoRF Exposure Info2011-06-17PDF 125.8 KB

Application Information

Application IDcKRVXsIzqFhc4tyCPe1p8w==
Final Action Date2011-06-17
Application PurposeOriginal Equipment
Applicant FRN0015216328
Model-1103022011008
Frequency Range824.2-848.8 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionGSM/GPRS/EDGE/WCDMA/HSDPA module
Responsible Partyyongsheng Li, Deputy General Manager, yongsheng.li@sim.com , +86 21 32523134
Test FirmDream Cao, QuieTek Corporation, dreamcao@quietek.com.cn , 86-512-62515088
TCB Emailgerald.schmidt@cetecom.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 8.3 dBi in the 850 MHz Cellular band and 3 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091, 22-H, 24-E. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate. This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.

Applications

Application IDDatePurpose
cKRVXsIzqFhc4tyCPe1p8w==2011-06-17Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
824.2-848.8 MHz1.765Hz300KGXW22H
824.2-848.8 MHz0.4567Hz300KG7W22H
826.4-846.6 MHz0.2466Hz4M20F9W22H
1850.2-1909.8 MHz177Hz300KGXW24E
1850.2-1909.8 MHz0.4268Hz300KG7W24E
1852.2-1907.6 MHz0.2357Hz4M20F9W24E

Grants

TCB Grant - Application cKRVXsIzqFhc4tyCPe1p8w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM ICT Services GmbH
Untertuerkheimer Strasse 6-10
66117 Saarbruecken,
Germany 		Date of Grant: 06/17/2011

Application Dated: 06/17/2011
Shanghai Simcom Ltd.
SIM Technology Building,No.633, Jinzhong Road,
Changning District, Shanghai, P.R. ChinaP.O. Box 200233,
Shanghai,
China
 
Attention: yongsheng Li , Deputy General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UDV-1103022011008
Name of Grantee:  Shanghai Simcom Ltd.
Equipment Class: PCS Licensed Transmitter
Notes: GSM/GPRS/EDGE/WCDMA/HSDPA module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.7 65.0  Hz 300KGXW
22H 824.2  -  848.8 0.45 67.0  Hz 300KG7W
22H 826.4  -  846.6 0.24 66.0  Hz 4M20F9W
24E 1850.2  -  1909.8 1.0 77.0  Hz 300KGXW
24E 1850.2  -  1909.8 0.42 68.0  Hz 300KG7W
24E 1852.2  -  1907.6 0.23 57.0  Hz 4M20F9W

Output power listed is conducted.

This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 8.3 dBi in the 850 MHz Cellular band and 3 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091, 22-H, 24-E.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.


EAS Grant - Application cKRVXsIzqFhc4tyCPe1p8w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Shanghai Simcom Ltd.
SIM Technology Building,No.633, Jinzhong Road, Changning District, Shanghai, P.R. ChinaP.O. Box 200233,
Shanghai,
China 		  Date of Grant: 06/17/2011

Application Dated: 06/17/2011
 
Attention: yongsheng Li , Deputy General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UDV-1103022011008
Name of Grantee:  Shanghai Simcom Ltd.
Equipment Class: PCS Licensed Transmitter
Notes: GSM/GPRS/EDGE/WCDMA/HSDPA module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 1.7 65.0  Hz 300KGXW
22H 824.2  -  848.8 0.45 67.0  Hz 300KG7W
22H 826.4  -  846.6 0.24 66.0  Hz 4M20F9W
24E 1850.2  -  1909.8 1.0 77.0  Hz 300KGXW
24E 1850.2  -  1909.8 0.42 68.0  Hz 300KG7W
24E 1852.2  -  1907.6 0.23 57.0  Hz 4M20F9W

Output power listed is conducted.

This device is to be used in mobile or fixed applications only. Antenna gain including cable loss must not exceed 8.3 dBi in the 850 MHz Cellular band and 3 dBi in the PCS 1900 MHz band, for the purpose of satisfying the requirements of 2.1043 and 2.1091, 22-H, 24-E.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operated in conjunction with any antenna or transmitter. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, spurious emissions, ERP/EIRP, and host/module authentication, or new application if appropriate.

This device contains GSM functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations.



Mail To: