FCC ID UDV-2013072401
GSM/GPRS/BT Wireless Data Module
by Shanghai Simcom Ltd.
Grantee Code: UDV Product Code: 2013072401
Latest application date: 2013-08-12
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 824.2-848.8 MHz | Original Equipment | 2013-08-12 |
| 2402-2480 MHz | Original Equipment | 2013-08-12 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2013-08-12 | PDF 238.7 KB |
| Internal Photos | Internal Photos | 2013-08-12 | PDF 172.8 KB |
| External Photos | External Photos | 2013-08-12 | PDF 418.6 KB |
| Label Location | ID Label/Location Info | 2013-08-12 | PDF 63.7 KB |
| Reference Design Board Description | Operational Description | 2013-08-12 | PDF 803.2 KB |
| Test Setup Photos | Test Setup Photos | 2013-08-12 | PDF 1.2 MB |
| Test Report | Test Report | 2013-08-12 | PDF 5.7 MB |
| Test Report | Test Report | 2013-08-12 | PDF 1 MB |
| Agent Authorization | Cover Letter(s) | 2013-08-12 | PDF 485.6 KB |
| Modular Approval Letter | Cover Letter(s) | 2013-08-12 | PDF 58.3 KB |
| Request for Confidentiality | Cover Letter(s) | 2013-08-12 | PDF 908.8 KB |
| RF Exposure Evaluation | RF Exposure Info | 2013-08-12 | PDF 159.9 KB |
Application Information
| Application ID | npBNXjAuC50N0XyOXTGczg== |
|---|---|
| Final Action Date | 2013-08-12 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0015216328 |
| Model | -2013072401 |
| Frequency Range | 824.2-848.8 MHz |
| Equipment Class | PCB - PCS Licensed Transmitter |
| Device Description | GSM/GPRS/BT Wireless Data Module |
| Responsible Party | yongsheng Li, Deputy General Manager, yongsheng.li@sim.com  , +86 21 32523134 |
| Technical Contact | Xing Chen, Shanghai Simcom Ltd., xing.chen@sim.com , 86-021-32523300 |
| Test Firm | Wang Rong, UniLab (Shanghai) Co., Ltd., wangrong@unilab.cn  , 86-21-50275125 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power output is conducted at the antenna terminal. Single Modular Approval. ERP for part 22 is 30.7 dBm and EIRP for part 24 is 29.6 dBm. This device is to be used only for mobile or fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install the module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 3 dBi at 850/1900 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no condition may an antenna gain be used that would exceed the 7W erp Part 22 and the 2W eirp Part 24 power limits. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| npBNXjAuC50N0XyOXTGczg== | 2013-08-12 | Original Equipment |
| G5Adi7gY/LTddchc0JDsag== | 2013-08-12 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application npBNXjAuC50N0XyOXTGczg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 08/12/2013 Application Dated: 08/08/2013 |
| Shanghai Simcom Ltd. |
| SIM Technology Building,No.633, Jinzhong Road, |
| Changning District, Shanghai, P.R. ChinaP.O. Box 200233, |
| Shanghai, China |
| Attention: yongsheng Li , Deputy General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UDV-2013072401 |
| Name of Grantee: | Shanghai Simcom Ltd. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | GSM/GPRS/BT Wireless Data Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BC | 22H | 824.2 - 848.8 | 1.71 | 0.033 PM | 289KGXW |
| BC | 24E | 1850.2 - 1909.8 | 0.9 | 0.023 PM | 275KGXW |
| Power output is conducted at the antenna terminal. Single Modular Approval. ERP for part 22 is 30.7 dBm and EIRP for part 24 is 29.6 dBm. This device is to be used only for mobile or fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install the module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 3 dBi at 850/1900 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no condition may an antenna gain be used that would exceed the 7W erp Part 22 and the 2W eirp Part 24 power limits. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| BC: | The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed. |
EAS Grant - Application npBNXjAuC50N0XyOXTGczg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shanghai Simcom Ltd. SIM Technology Building,No.633, Jinzhong Road, Changning District, Shanghai, P.R. ChinaP.O. Box 200233, Shanghai, China |
Date of Grant: 08/12/2013 Application Dated: 08/08/2013 |
| Attention: yongsheng Li , Deputy General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UDV-2013072401 |
| Name of Grantee: | Shanghai Simcom Ltd. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | GSM/GPRS/BT Wireless Data Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| BC | 22H | 824.2 - 848.8 | 1.71 | 0.033 PM | 289KGXW |
| BC | 24E | 1850.2 - 1909.8 | 0.9 | 0.023 PM | 275KGXW |
| Power output is conducted at the antenna terminal. Single Modular Approval. ERP for part 22 is 30.7 dBm and EIRP for part 24 is 29.6 dBm. This device is to be used only for mobile or fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install the module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 3 dBi at 850/1900 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no condition may an antenna gain be used that would exceed the 7W erp Part 22 and the 2W eirp Part 24 power limits. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| BC: | The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 08/12/2013 Application Dated: 08/08/2013 |
| Shanghai Simcom Ltd. |
| SIM Technology Building,No.633, Jinzhong Road, |
| Changning District, Shanghai, P.R. ChinaP.O. Box 200233, |
| Shanghai, China |
| Attention: yongsheng Li , Deputy General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UDV-2013072401 |
| Name of Grantee: | Shanghai Simcom Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | GSM/GPRS/BT Wireless Data Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0039 |
| Power output listed is conducted. Single Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
EAS Grant - Application G5Adi7gY/LTddchc0JDsag==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shanghai Simcom Ltd. SIM Technology Building,No.633, Jinzhong Road, Changning District, Shanghai, P.R. ChinaP.O. Box 200233, Shanghai, China |
Date of Grant: 08/12/2013 Application Dated: 08/08/2013 |
| Attention: yongsheng Li , Deputy General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UDV-2013072401 |
| Name of Grantee: | Shanghai Simcom Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | GSM/GPRS/BT Wireless Data Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0039 |
| Power output listed is conducted. Single Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| Mail To: |