FCC ID UDV-201606

Single Modular Approval. Power out is conducted at the antenna terminal.

ERP for part 22 is 23.11 dBm, EIRP for part 24 is 23.71 dBm and EIRP for part 27 is 23.20 dBm. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End- Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install the SIM7500A module. For mobile and fixed operating configurations the antenna gain, including cable loss, are 1.87 dBi at 1900 MHz, 3.49 dBi at 1700 MHz, 0.91 dBi at 850 MHz and 1.57 dBi at 700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no condition may an antenna gain be used that would exceed the 7W erp Part 22, the 2W eirp Part 24 and the 3W eirp Part 27 power limits. The Grantee is responsible for providing the documentation required for modular use.

This device contains LTE/WCDMA functions that are not operational in U.S. territories. This filing is only applicable for 700 MHz MBS, 850 MHz Cell, 1700 MHz AWS and 1900 MHz PCS operations.

This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 2 and 4; 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Band 12.

This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

Single Modular Approval. Power out is conducted at the antenna terminal.

ERP for part 22 is 23.11 dBm, EIRP for part 24 is 23.71 dBm and EIRP for part 27 is 23.20 dBm. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End- Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install the SIM7500A module. For mobile and fixed operating configurations the antenna gain, including cable loss, are 1.87 dBi at 1900 MHz, 3.49 dBi at 1700 MHz, 0.91 dBi at 850 MHz and 1.57 dBi at 700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no condition may an antenna gain be used that would exceed the 7W erp Part 22, the 2W eirp Part 24 and the 3W eirp Part 27 power limits. The Grantee is responsible for providing the documentation required for modular use.

This device contains LTE/WCDMA functions that are not operational in U.S. territories. This filing is only applicable for 700 MHz MBS, 850 MHz Cell, 1700 MHz AWS and 1900 MHz PCS operations.

This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 2 and 4; 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Band 12.

This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

ERP for part 22 is 23.11 dBm, EIRP for part 24 is 23.71 dBm and EIRP for part 27 is 23.32 dBm. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End- Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install the SIM7500A module. For mobile and fixed operating configurations the antenna gain, including cable loss, are 1.87 dBi at 1900 MHz, 3.49 dBi at 1700 MHz, 0.91 dBi at 850 MHz and 1.57dBi at 700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no condition may an antenna gain be used that would exceed the 7W erp Part 22, the 2W eirp Part 24 and the 3W eirp Part 27 power limits. The Grantee is responsible for providing the documentation required for modular use. This device contains LTE/WCDMA functions that are not operational in U.S. territories. This filing is only applicable for 700 MHz MBS, 850 MHz Cell, 1700 MHz AWS and 1900 MHz PCS operations.

This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 2 and 4; 5 MHz and 10 MHz bandwidth modes for LTE Band 17.

This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

ERP for part 22 is 23.11 dBm, EIRP for part 24 is 23.71 dBm and EIRP for part 27 is 23.32 dBm. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End- Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install the SIM7500A module. For mobile and fixed operating configurations the antenna gain, including cable loss, are 1.87 dBi at 1900 MHz, 3.49 dBi at 1700 MHz, 0.91 dBi at 850 MHz and 1.57dBi at 700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no condition may an antenna gain be used that would exceed the 7W erp Part 22, the 2W eirp Part 24 and the 3W eirp Part 27 power limits. The Grantee is responsible for providing the documentation required for modular use. This device contains LTE/WCDMA functions that are not operational in U.S. territories. This filing is only applicable for 700 MHz MBS, 850 MHz Cell, 1700 MHz AWS and 1900 MHz PCS operations.

This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 2 and 4; 5 MHz and 10 MHz bandwidth modes for LTE Band 17.

This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.