FCC ID UDX-60024010

Router

by Cisco Systems, Inc.

Grantee Code: UDX   Product Code: 60024010
Latest application date: 2016-06-11

FCC ID Device Details

FCC IDUDX-60024010
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeUDX
Product Code60024010
Applicant BusinessCisco Systems, Inc. 🇺🇸
Related Domains cisco.com
Equipment ClassRouter
Test FirmDEKRA TESTING AND CERTIFICATION CO., LTD. LinKou

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2016-06-11
5180-5240 MHzOriginal Equipment2012-10-25
2412-2462 MHzOriginal Equipment2012-10-25

Exhibits

DocumentTypeAvailableFile
user manualUsers Manual2013-03-21PDF 366.5 KB
internal photoInternal Photos2013-03-21PDF 2.1 MB
external photoExternal Photos2013-03-21PDF 181.3 KB
ID LabelID Label/Location Info2012-10-25PDF 80.7 KB
Label location infoID Label/Location Info2012-10-25PDF 12.8 KB
test setup photoTest Setup Photos2013-03-21PDF 281.5 KB
Test reportTest Report2012-10-25PDF 4.7 MB
Test reportTest Report2012-10-25PDF 4.5 MB
test report 15C-part 1 revTest Report2012-10-25PDF 4.4 MB
test report 15C-part 4 revTest Report2012-10-25PDF 3.4 MB
UDX-60024010_Attestation LetterCover Letter(s)2016-06-11PDF 1,003.2 KB
attestation letterCover Letter(s)2012-10-25PDF 3.3 MB
UDX-60024010_Agent Authorization LetterCover Letter(s)2016-06-11PDF 1,012.1 KB
UDX-60024010_Request for C2PC Metadata onlyCover Letter(s)2016-06-11PDF 1,003.1 KB
UDX-60024010_Request for C2PC_rev2Cover Letter(s)2016-06-11PDF 1,010.5 KB
UDX-60024010_Request for Confidentiality_C2PC Metadata onlyCover Letter(s)2016-06-11PDF 1,008.9 KB
UDX-60024010_Request for Confidentiality_C2PC_rev1Cover Letter(s)2016-06-11PDF 1,008.8 KB
DoC letterCover Letter(s)2012-10-25PDF 3.3 MB
declaration of authorizationCover Letter(s)2012-10-25PDF 3.3 MB
long term confidentialityCover Letter(s)2012-10-25PDF 3.3 MB
short term confidentialityCover Letter(s)2012-10-25PDF 96.6 KB
RF exposure infoRF Exposure Info2012-10-25PDF 44.2 KB
UDX-60024010_Antenna Specs_1 Metadata onlyOperational DescriptionPDF 1 MB
UDX-60024010_Antenna Specs_2 Metadata onlyOperational DescriptionPDF 1.1 MB
UDX-60024010_Antenna Specs_3 Metadata onlyOperational DescriptionPDF 1.1 MB
UDX-60024010_Antenna Specs_4 Metadata onlyOperational DescriptionPDF 1.1 MB
UDX-60024010_KDB 594280 D02 v01r03 U-NII Device SW Security Statement Metadata onlySDR Software/Security InfPDF 89.7 KB

Application Information

Application IDK7u12A1HY5IOnbb6SnYF6g==
Final Action Date2016-06-11
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0006884381
Model60024010
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionRouter
Responsible PartyAurelio Llabres, rllabres@cisco.com , 415-432-1000
Test FirmMirenda Liao, DEKRA TESTING AND CERTIFICATION CO., LTD. LinKou, mirenda.liao@dekra.com , +886-2-2602-7968
TCB EmailLST.FRE.CertNotice@ul.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive change to approve under new UNII band rule per FCC ET Docket No.13-49. Power listed is combined conducted output power. UNII-1 band is average output power and UNII-3 band is peak output power. This device must be professionally installed. Marketing to the General Public is prohibited. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The use of other antenna requires a Class II Permissive Change filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End -users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.

Applications

Application IDDatePurpose
K7u12A1HY5IOnbb6SnYF6g==2016-06-11Class II permissive change or modification of presently authorized equipment
Uu2PhlMHh2b5Llmhvp/Q/g==2012-10-25Original Equipment
QCYzvZQx6WD1p3TjzoTcqQ==2012-10-25Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.2915CCC, MO
5180-5240 MHz0.04915E38, 49, CC, MO
5180-5240 MHz0.049000015EMO
5745-5825 MHz0.315E38, 49, CC, MO
5745-5825 MHz0.315CCC, MO

Grants

TCB Grant - Application Uu2PhlMHh2b5Llmhvp/Q/g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Edisonstraat 12a
Zevenaar, NL-6902 PK
Netherlands
Date of Grant: 10/25/2012

Application Dated: 10/23/2012
Cisco Systems
170 West Tasman Drive
San Jose, CA 95134
 
Attention: Ben Calderon

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UDX-60024010
Name of Grantee:  Cisco Systems
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 15E 5180.0  -  5240.0 0.049  

Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidths. Operations in 5150-5250 MHz band is for indoor use only.

MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application Uu2PhlMHh2b5Llmhvp/Q/g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems
170 West Tasman Drive
San Jose, CA 95134
United States
  Date of Grant: 10/25/2012

Application Dated: 10/23/2012
 
Attention: Ben Calderon

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UDX-60024010
Name of Grantee:  Cisco Systems
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 15E 5180.0  -  5240.0 0.049  

Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidths. Operations in 5150-5250 MHz band is for indoor use only.


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application QCYzvZQx6WD1p3TjzoTcqQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Edisonstraat 12a
Zevenaar, NL-6902 PK
Netherlands
Date of Grant: 10/25/2012

Application Dated: 10/22/2012
Cisco Systems
170 West Tasman Drive
San Jose, CA 95134
 
Attention: Ben Calderon

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UDX-60024010
Name of Grantee:  Cisco Systems
Equipment Class: Digital Transmission System
Notes: Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.29  
CC MO 15C 5745.0  -  5825.0 0.3  

Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20/40 MHz bandwidths.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application QCYzvZQx6WD1p3TjzoTcqQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems
170 West Tasman Drive
San Jose, CA 95134
United States
  Date of Grant: 10/25/2012

Application Dated: 10/22/2012
 
Attention: Ben Calderon

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UDX-60024010
Name of Grantee:  Cisco Systems
Equipment Class: Digital Transmission System
Notes: Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.29  
CC MO 15C 5745.0  -  5825.0 0.3  

Power output listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20/40 MHz bandwidths.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application K7u12A1HY5IOnbb6SnYF6g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 06/11/2016

Application Dated: 06/02/2016
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134
 
Attention: Aurelio Llabres

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UDX-60024010
Name of Grantee:  Cisco Systems, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 49 CC MO 15E 5180.0  -  5240.0 0.049  
38 49 CC MO 15E 5745.0  -  5825.0 0.3  

Class II Permissive change to approve under new UNII band rule per FCC ET Docket No.13-49. Power listed is combined conducted output power. UNII-1 band is average output power and UNII-3 band is peak output power. This device must be professionally installed. Marketing to the General Public is prohibited. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The use of other antenna requires a Class II Permissive Change filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End -users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
49: The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application K7u12A1HY5IOnbb6SnYF6g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134
United States
  Date of Grant: 06/11/2016

Application Dated: 06/02/2016
 
Attention: Aurelio Llabres

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UDX-60024010
Name of Grantee:  Cisco Systems, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 49 CC MO 15E 5180.0  -  5240.0 0.049  
38 49 CC MO 15E 5745.0  -  5825.0 0.3  

Class II Permissive change to approve under new UNII band rule per FCC ET Docket No.13-49. Power listed is combined conducted output power. UNII-1 band is average output power and UNII-3 band is peak output power. This device must be professionally installed. Marketing to the General Public is prohibited. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The use of other antenna requires a Class II Permissive Change filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End -users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
49: The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: