FCC ID UDX-60051010

Wireless 802.11 abgn/ac indoor AP

by Cisco Systems, Inc.

Grantee Code: UDX   Product Code: 60051010
Latest application date: 2022-05-04

Device Images

FCC ID Device Details

FCC IDUDX-60051010
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeUDX
Product Code60051010
Applicant BusinessCisco Systems, Inc. 🇺🇸
Related Domains cisco.com
Equipment ClassWireless 802.11 abgn/ac indoor AP
Test FirmSporton International Inc. Hsinchu Laboratory

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2404.053-2479.285 MHzClass III permissive change to software defined radio2022-05-04
5180-5240 MHzClass III permissive change to software defined radio2017-03-03
2402-2480 MHzOriginal Equipment2016-11-16
5180-5240 MHzOriginal Equipment2016-11-16

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2016-12-31PDF 81.6 KB
Internal PhotosInternal Photos2016-12-31PDF 5 MB
External PhotoExternal Photos2016-12-31PDF 671.6 KB
External PhotosExternal Photos2016-12-31PDF 671.6 KB
Label LocationID Label/Location Info2016-11-16PDF 1 MB
Label SampleID Label/Location Info2016-11-16PDF 289.7 KB
Test Setup PhotosTest Setup Photos2022-05-04PDF 444.9 KB
Test Setup PhotoTest Setup Photos2017-03-03PDF 1.9 MB
Test Setup PhotosTest Setup Photos2016-12-31PDF 1.9 MB
Test ReportTest Report2022-05-04PDF 874.1 KB
Test Report DFSTest Report2017-03-03PDF 3.3 MB
Test Report NIITest Report2017-03-03PDF 1.1 MB
Test ReportTest Report2016-11-16PDF 1.3 MB
Test Report DTS BT LETest Report2016-11-16PDF 419.4 KB
Test Report DTS WLANTest Report2016-11-16PDF 1.6 MB
Attestation Letter DFS Master DeclarationAttestation Statements2017-03-03PDF 977.1 KB
DoCCover Letter(s)2016-11-16PDF 1,021 KB
FCC Regulations AttestationCover Letter(s)2016-11-16PDF 1,016.3 KB
FCC Regulations AttestationAttestation Statements2016-11-16PDF 1,016.3 KB
C3PC LetterCover Letter(s)2022-05-04PDF 135.7 KB
Confidentiality LetterCover Letter(s)2022-05-04PDF 94.7 KB
POA LetterCover Letter(s)2022-05-04PDF 99.1 KB
Agent Authorization LetterCover Letter(s)2017-03-03PDF 1 MB
Confidentiality Request LetterCover Letter(s)2017-03-03PDF 1,023.8 KB
Description of ChangeCover Letter(s)2017-03-03PDF 1,017.6 KB
Confidentiality LetterCover Letter(s)2016-11-16PDF 1,023.7 KB
POACover Letter(s)2016-11-16PDF 1 MB
RF Exposure Info MPERF Exposure Info2017-03-03PDF 163.1 KB
RF ExposureRF Exposure Info2016-11-16PDF 58.6 KB
Operational Description Metadata onlyOperational DescriptionPDF 64.2 KB
Operational Description Software Security Metadata onlySDR Software/Security InfPDF 90.3 KB
Theory of Operation Metadata onlyOperational DescriptionPDF 42.4 KB
SDR Files Metadata onlySDR Software/Security InfPDF 309.8 KB
SDR Operational Desc PBA-SDR-1 Metadata onlySDR Software/Security InfPDF 95.6 KB
SDR Operational Desc PBA-SDR-2 Metadata onlySDR Software/Security InfPDF 151.4 KB
SDR Operational Desc SDR Metadata onlySDR Software/Security InfPDF 370.2 KB

Application Information

Application IDVdTQicfWuLQrHqh6z7slGQ==
Final Action Date2022-05-04
Application PurposeClass III permissive change to software defined radio
Applicant FRN0006884381
Model60051010
Frequency Range2404.053-2479.285 MHz
Equipment ClassDXX - Part 15 Low Power Communication Device Transmitter
Device DescriptionWireless 802.11 abgn/ac indoor AP
Responsible PartyAurelio Llabres, rllabres@cisco.com , 415-432-1000
Test FirmAlex Chen, Sporton International Inc. Hsinchu Laboratory, alex@sporton.com.tw , +886-3-327-3456
TCB Emailtei@timcoengr.com
TCB ScopeA2: Low Power Transmitters (except Spread Spectrum) and radar detectors operating above 1 GHz
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioYes
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsSoftware Defined Radio. Class III Permissive Change: Adds IoT function (2404.053 - 2479.285 MHz) via software change.

Applications

Application IDDatePurpose
VdTQicfWuLQrHqh6z7slGQ==2022-05-04Class III permissive change to software defined radio
r1fCpcAUrwxvw0J09yWCgg==2017-03-03Class III permissive change to software defined radio
tacqKoXwkZSUFNDYrPd8XQ==2016-11-16Original Equipment
/tS2btY7xjl3ooz54vITaA==2016-11-16Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.00315CCC, MO
2404.053-2479.285 MHz15C
2412-2462 MHz0.24615CCC, MO
5180-5240 MHz0.16315E38, CC, MO, ND
5180-5240 MHz0.16315E38, CC, MO
5260-5320 MHz0.18815E38, CC, MO, ND
5500-5700 MHz0.17515E38, CC, MO, ND
5745-5825 MHz0.23415E38, CC, MO, ND
5745-5825 MHz0.23415E38, CC, MO

Grants

TCB Grant - Application VdTQicfWuLQrHqh6z7slGQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 05/04/2022

Application Dated: 04/29/2022
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134
 
Attention: Aurelio Llabres

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UDX-60051010
Name of Grantee:  Cisco Systems, Inc.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Wireless 802.11 abgn/ac indoor AP
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2404.053  -  2479.285  

Software Defined Radio.

Class III Permissive Change: Adds IoT function (2404.053 - 2479.285 MHz) via software change.


EAS Grant - Application VdTQicfWuLQrHqh6z7slGQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134
United States
  Date of Grant: 05/04/2022

Application Dated: 04/29/2022
 
Attention: Aurelio Llabres

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UDX-60051010
Name of Grantee:  Cisco Systems, Inc.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Wireless 802.11 abgn/ac indoor AP
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2404.053  -  2479.285  

Software Defined Radio.

Class III Permissive Change: Adds IoT function (2404.053 - 2479.285 MHz) via software change.



TCB Grant - Application tacqKoXwkZSUFNDYrPd8XQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 11/16/2016

Application Dated: 10/18/2016
Cisco Systems
170 West Tasman Drive
San Jose, CA 95134
 
Attention: Alexander Gioe

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UDX-60051010
Name of Grantee:  Cisco Systems
Equipment Class: Digital Transmission System
Notes: Wireless 802.11 abgn/ac indoor AP
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.246  
CC MO 15C 2402.0  -  2480.0 0.003  

Power listed is maximum combined output power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 and 40MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application tacqKoXwkZSUFNDYrPd8XQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems
170 West Tasman Drive
San Jose, CA 95134
United States
  Date of Grant: 11/16/2016

Application Dated: 10/18/2016
 
Attention: Alexander Gioe

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UDX-60051010
Name of Grantee:  Cisco Systems
Equipment Class: Digital Transmission System
Notes: Wireless 802.11 abgn/ac indoor AP
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.246  
CC MO 15C 2402.0  -  2480.0 0.003  

Power listed is maximum combined output power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 and 40MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application r1fCpcAUrwxvw0J09yWCgg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 03/03/2017

Application Dated: 01/09/2017
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134
 
Attention: Aurelio Llabres

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UDX-60051010
Name of Grantee:  Cisco Systems, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless 802.11 abgn/ac indoor AP
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO ND 15E 5180.0  -  5240.0 0.163  
38 CC MO ND 15E 5745.0  -  5825.0 0.234  
38 CC MO ND 15E 5260.0  -  5320.0 0.188  
38 CC MO ND 15E 5500.0  -  5700.0 0.175  

Power listed is maximum combined output power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80MHz bandwidth modes.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application r1fCpcAUrwxvw0J09yWCgg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134
United States
  Date of Grant: 03/03/2017

Application Dated: 01/09/2017
 
Attention: Aurelio Llabres

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UDX-60051010
Name of Grantee:  Cisco Systems, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless 802.11 abgn/ac indoor AP
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO ND 15E 5180.0  -  5240.0 0.163  
38 CC MO ND 15E 5745.0  -  5825.0 0.234  
38 CC MO ND 15E 5260.0  -  5320.0 0.188  
38 CC MO ND 15E 5500.0  -  5700.0 0.175  

Power listed is maximum combined output power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80MHz bandwidth modes.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application /tS2btY7xjl3ooz54vITaA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 11/16/2016

Application Dated: 10/18/2016
Cisco Systems
170 West Tasman Drive
San Jose, CA 95134
 
Attention: Alexander Gioe

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UDX-60051010
Name of Grantee:  Cisco Systems
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless 802.11 abgn/ac indoor AP
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.163  
38 CC MO 15E 5745.0  -  5825.0 0.234  

Power listed is maximum combined output power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80MHz bandwidth modes.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application /tS2btY7xjl3ooz54vITaA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems
170 West Tasman Drive
San Jose, CA 95134
United States
  Date of Grant: 11/16/2016

Application Dated: 10/18/2016
 
Attention: Alexander Gioe

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UDX-60051010
Name of Grantee:  Cisco Systems
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless 802.11 abgn/ac indoor AP
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.163  
38 CC MO 15E 5745.0  -  5825.0 0.234  

Power listed is maximum combined output power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80MHz bandwidth modes.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: