FCC ID UDX-60067010
802.11 a/b/g/n/ac Wireless Access Point
by Cisco Systems, Inc.
Grantee Code: UDX Product Code: 60067010
Latest application date: 2018-01-29
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2018-01-29 |
| 5180-5240 MHz | Original Equipment | 2018-01-29 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| UDX-60067010_Installation Guide | Users Manual | 2018-03-18 | PDF 991.9 KB |
| Photographs of EUT_RF_EP782229_FCC_IC_Internal | Internal Photos | 2018-03-18 | PDF 2.3 MB |
| Photographs of EUT_RF_EP782229_FCC_IC_External | External Photos | 2018-03-18 | PDF 203.2 KB |
| UDX-60067010_Label and Location | ID Label/Location Info | 2018-01-29 | PDF 898.6 KB |
| 11910229-E3V4 FCC IC UNII WLAN DFS Setup Photos | Test Setup Photos | 2018-03-18 | PDF 111.9 KB |
| FR782229AA FCC RF Test report_2.4G_Photos | Test Setup Photos | 2018-03-18 | PDF 278.7 KB |
| FR782229AB FCC RF Test report_5G_B1_B4_Photos | Test Setup Photos | 2018-03-18 | PDF 275.6 KB |
| FR782229AC FCC RF Test report_5G_B2_B3_Photos | Test Setup Photos | 2018-03-18 | PDF 275.6 KB |
| 11910229-E3V4 FCC IC UNII WLAN DFS REPORT | Test Report | 2018-01-29 | PDF 3.2 MB |
| FA782229AA FCC MPE Test Report | RF Exposure Info | 2018-01-29 | PDF 166.9 KB |
| FR782229AA FCC RF Test report_2.4G | Test Report | 2018-01-29 | PDF 4.4 MB |
| FR782229AB FCC RF Test report_5G_B1_B4_Part1 | Test Report | 2018-01-29 | PDF 5.5 MB |
| FR782229AB FCC RF Test report_5G_B1_B4_Part2 | Test Report | 2018-01-29 | PDF 1.2 MB |
| FR782229AC FCC RF Test report_5G_B2_B3_Part1 | Test Report | 2018-01-29 | PDF 5.5 MB |
| FR782229AC FCC RF Test report_5G_B2_B3_Part2 | Test Report | 2018-01-29 | PDF 2.8 MB |
| UDX-60067010_Attestation of Power Conformity | Attestation Statements | 2018-01-29 | PDF 1,002.7 KB |
| UDX-60067010_Letter of Attestation | Attestation Statements | 2018-01-29 | PDF 973.1 KB |
| UDX-60067010_Agent Authorization Letter | Cover Letter(s) | 2018-01-29 | PDF 980.3 KB |
| UDX-60067010_MR70_USA_FCC_Declaration for DFS Master Devices | Cover Letter(s) | 2018-01-29 | PDF 34.9 KB |
| UDX-60067010_Request for Confidentiality | Cover Letter(s) | 2018-01-29 | PDF 977.2 KB |
| UDX-60067010_Block Diagram Metadata only | Block Diagram | PDF 1.1 MB | |
| UDX-60067010_Schematic Metadata only | Schematics | PDF 1.1 MB | |
| UDX-60067010_Expedited DFS Review Request Metadata only | Operational Description | PDF 981.7 KB | |
| UDX-60067010_Theory of Operation Metadata only | Operational Description | PDF 13.3 KB | |
| KDB 594280 D02 v01r04 U-NII Device SW Security Statement_master devices Metadata only | SDR Software/Security Inf | PDF 90.3 KB | |
| SDR PBA Filing Metadata only | SDR Software/Security Inf | PDF 309.8 KB | |
| UDX-60067010_Antenna Spec Metadata only | Parts List/Tune Up Info | PDF 941.7 KB |
Application Information
| Application ID | cKbA2lp/qkSWtAwVlY2Qcg== |
|---|---|
| Final Action Date | 2018-01-29 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0006884381 |
| Model | 60067010 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.11 a/b/g/n/ac Wireless Access Point |
| Responsible Party | Aurelio Llabres, rllabres@cisco.com  , 415-432-1000 |
| Agent | Ayako Ayako Ayako, UL Verification Services, Inc. |
| Technical Contact | Ayako Kanamatsu, UL Verification Services Inc., Ayako.Kanamatsu@ul.com  , 5107711000 |
| Test Firm | Sharon Jiang, SPORTON International Inc., sharonjiang@sporton.com.tw  , 886-3-656-9065 |
| TCB Email | LST.FRE.CertNotice@ul.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 03/18/2018 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | Yes |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Power listed is combined maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 and 40 MHz bandwidth modes. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| cKbA2lp/qkSWtAwVlY2Qcg== | 2018-01-29 | Original Equipment |
| 9LSFJj6JWL4/01+jRAcf3A== | 2018-01-29 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application cKbA2lp/qkSWtAwVlY2Qcg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 01/29/2018 Application Dated: 01/18/2018 |
| Cisco Systems, Inc. |
| 170 West Tasman Drive |
| San Jose, CA 95134 |
| Attention: Aurelio Llabres |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UDX-60067010 |
| Name of Grantee: | Cisco Systems, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b/g/n/ac Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.484 |
| Power listed is combined maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application cKbA2lp/qkSWtAwVlY2Qcg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134 United States |
Date of Grant: 01/29/2018 Application Dated: 01/18/2018 |
| Attention: Aurelio Llabres |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UDX-60067010 |
| Name of Grantee: | Cisco Systems, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b/g/n/ac Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.484 |
| Power listed is combined maximum conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 01/29/2018 Application Dated: 01/18/2018 |
| Cisco Systems, Inc. |
| 170 West Tasman Drive |
| San Jose, CA 95134 |
| Attention: Aurelio Llabres |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UDX-60067010 |
| Name of Grantee: | Cisco Systems, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g/n/ac Wireless Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.361 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.249 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.245 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.384 |
| Power listed is combined maximum conducted output power. This device is restricted to indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 9LSFJj6JWL4/01+jRAcf3A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134 United States |
Date of Grant: 01/29/2018 Application Dated: 01/18/2018 |
| Attention: Aurelio Llabres |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UDX-60067010 |
| Name of Grantee: | Cisco Systems, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g/n/ac Wireless Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.361 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.249 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.245 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.384 |
| Power listed is combined maximum conducted output power. This device is restricted to indoor use only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |