FCC ID UDX-62009015
802.11a/b/g/n MINI-PCI Module
by Cisco Systems
Grantee Code: UDX Product Code: 62009015
Latest application date: 2011-02-10
FCC ID Device Details
| FCC ID | UDX-62009015 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | UDX |
| Product Code | 62009015 |
| Applicant Business | Cisco Systems 🇺🇸 |
| Related Domains |  meraki.com |
| Equipment Class | 802.11a/b/g/n MINI-PCI Module |
| Test Firm | Compliance Certification Services |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2011-02-10 |
| 5180-5240 MHz | Original Equipment | 2009-03-16 |
| 2412-2462 MHz | Original Equipment | 2009-03-16 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Addendum for antennas | Parts List/Tune Up Info | 2009-03-16 | PDF 63.9 KB |
| Users Manual | Users Manual | 2009-03-16 | PDF 670.2 KB |
| Users Manual regulatory notice | Users Manual | 2009-03-16 | PDF 360.4 KB |
| Internal Photos | Internal Photos | 2009-03-16 | PDF 224.4 KB |
| External Photos | External Photos | 2009-03-16 | PDF 152 KB |
| ID Label | ID Label/Location Info | 2009-03-16 | PDF 42.3 KB |
| Test Setup Photos | Test Setup Photos | 2009-03-16 | PDF 338.9 KB |
| Test Setup Photos | Test Setup Photos | 2009-03-16 | PDF 518.4 KB |
| MPE colocated calculation | Test Report | 2009-03-16 | PDF 18.9 KB |
| Test Report 1 | Test Report | 2009-03-16 | PDF 4.3 MB |
| Test Report 1 | Test Report | 2009-03-16 | PDF 1 MB |
| Test Report 2 | Test Report | 2009-03-16 | PDF 3 MB |
| Test Report 2 | Test Report | 2009-03-16 | PDF 2.5 MB |
| DFS attestation leter | Cover Letter(s) | PDF 37.5 KB | |
| Authorization Letter | Cover Letter(s) | 2009-03-16 | PDF 158.6 KB |
| Modular Approval Letter | Cover Letter(s) | 2009-03-16 | PDF 78.5 KB |
| Request for Confidentiality | Cover Letter(s) | 2009-03-16 | PDF 1 MB |
| TCB Q and A | Cover Letter(s) | 2009-03-16 | PDF 49.1 KB |
| Authorization Letter | Cover Letter(s) | PDF 135.9 KB | |
| C2PC Letter | Cover Letter(s) | PDF 46.5 KB | |
| MPE | RF Exposure Info | 2009-03-16 | PDF 70 KB |
| colocated MPE Calculation | RF Exposure Info | 2009-03-16 | PDF 18.9 KB |
Application Information
| Application ID | AAFvb0uIPiYnGbEEfNG14g== |
|---|---|
| Final Action Date | 2011-02-10 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0015216245 |
| Model | -62009015 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | 802.11a/b/g/n MINI-PCI Module |
| Responsible Party | Ben Calderon, ben.calderon@meraki.com , 415-432-1000 |
| Technical Contact | Michael Heckrotte, COMPLIANCE CERTIFICATION SERVICES, Michael.Heckrotte@CCSEMC.COM  , (510) 771-1000 |
| Test Firm | Thu Chan, Compliance Certification Services, thu.chan@ccsemc.com , 510-771-1122 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| AAFvb0uIPiYnGbEEfNG14g== | 2011-02-10 | Class II permissive change or modification of presently authorized equipment |
| j+q0cLMkxVM1IRWnA/b/nA== | 2009-03-16 | Original Equipment |
| bZR0VW9zFzZpmSOOUpWY7A== | 2009-03-16 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2412-2462 MHz | 0.1538 | 15C | 36, CC, MO |
| 2422-2452 MHz | 0.1167 | 15C | 36, CC, MO |
| 5180-5240 MHz | 0.04436 | 15E | 36, CC, MO |
| 5180-5240 MHz | 0.04395 | 15E | |
| 5180-5240 MHz | 0.04395 | 15E | 36, CC, MO |
| 5190-5230 MHz | 0.04571 | 15E | |
| 5190-5230 MHz | 0.04571 | 15E | 36, CC, MO |
| 5260-5320 MHz | 0.16 | 15E | |
| 5260-5320 MHz | 0.181 | 15E | |
| 5270-5310 MHz | 0.156 | 15E | |
| 5500-5700 MHz | 0.152 | 15E | |
| 5500-5700 MHz | 0.175 | 15E | |
| 5510-5670 MHz | 0.191 | 15E | |
| 5745-5805 MHz | 0.13092 | 15E | |
| 5745-5805 MHz | 0.13092 | 15E | 36, CC, MO |
| 5745-5805 MHz | 0.12882 | 15E | |
| 5745-5805 MHz | 0.12882 | 15E | 36, CC, MO |
| 5755-5795 MHz | 0.12706 | 15E | |
| 5755-5795 MHz | 0.12706 | 15E | 36, CC, MO |
Grants
TCB Grant - Application j+q0cLMkxVM1IRWnA/b/nA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 03/16/2009 Application Dated: 03/16/2009 |
| Cisco Systems |
| 170 West Tasman Drive |
| San Jose, CA 95134 |
| Attention: Ben Calderon |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UDX-62009015 |
| Name of Grantee: | Cisco Systems |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n MINI-PCI Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC MO | 15E | 5180.0 - 5240.0 | 0.04436 | ||
| 36 CC MO | 15E | 5745.0 - 5805.0 | 0.13092 | ||
| 36 CC MO | 15E | 5180.0 - 5240.0 | 0.04395 | ||
| 36 CC MO | 15E | 5745.0 - 5805.0 | 0.12882 | ||
| 36 CC MO | 15E | 5190.0 - 5230.0 | 0.04571 | ||
| 36 CC MO | 15E | 5755.0 - 5795.0 | 0.12706 |
| Modular approval for mobile RF Exposure conditions. Output power listed is maximum combined conducted. Device is 2x2 MIMO operating in spatial multiplexing and single chain legacy modes. Professional installation is required for certain antennas used with this device. The antenna(s) used for this transmitter must be installed to provide a separation distance of 46 cm for the 23 dBi antenna and 20 cm for all other antennas. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. 5150-5250 MHz is limited to indoor operation only. The only antennas approved for use with this module are those documented in the filings under this FCC ID. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application j+q0cLMkxVM1IRWnA/b/nA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems 170 West Tasman Drive San Jose, CA 95134 United States |
Date of Grant: 03/16/2009 Application Dated: 03/16/2009 |
| Attention: Ben Calderon |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UDX-62009015 |
| Name of Grantee: | Cisco Systems |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n MINI-PCI Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC MO | 15E | 5180.0 - 5240.0 | 0.04436 | ||
| 36 CC MO | 15E | 5745.0 - 5805.0 | 0.13092 | ||
| 36 CC MO | 15E | 5180.0 - 5240.0 | 0.04395 | ||
| 36 CC MO | 15E | 5745.0 - 5805.0 | 0.12882 | ||
| 36 CC MO | 15E | 5190.0 - 5230.0 | 0.04571 | ||
| 36 CC MO | 15E | 5755.0 - 5795.0 | 0.12706 |
| Modular approval for mobile RF Exposure conditions. Output power listed is maximum combined conducted. Device is 2x2 MIMO operating in spatial multiplexing and single chain legacy modes. Professional installation is required for certain antennas used with this device. The antenna(s) used for this transmitter must be installed to provide a separation distance of 46 cm for the 23 dBi antenna and 20 cm for all other antennas. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. 5150-5250 MHz is limited to indoor operation only. The only antennas approved for use with this module are those documented in the filings under this FCC ID. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 03/16/2009 Application Dated: 03/16/2009 |
| Cisco Systems |
| 170 West Tasman Drive |
| San Jose, CA 95134 |
| Attention: Ben Calderon |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UDX-62009015 |
| Name of Grantee: | Cisco Systems |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n MINI-PCI Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC MO | 15C | 2412.0 - 2462.0 | 0.1538 | ||
| 36 CC MO | 15C | 2422.0 - 2452.0 | 0.1167 |
| Modular approval for mobile RF Exposure conditions. Output power listed is maximum combined conducted. Device is 2x2 MIMO operating in spatial multiplexing and single chain legacy modes. Professional installation is required. The antenna(s) used for this transmitter must be installed to provide minimum separation distance of 20 cm for all from all persons. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application bZR0VW9zFzZpmSOOUpWY7A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Cisco Systems 170 West Tasman Drive San Jose, CA 95134 United States |
Date of Grant: 03/16/2009 Application Dated: 03/16/2009 |
| Attention: Ben Calderon |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UDX-62009015 |
| Name of Grantee: | Cisco Systems |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n MINI-PCI Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC MO | 15C | 2412.0 - 2462.0 | 0.1538 | ||
| 36 CC MO | 15C | 2422.0 - 2452.0 | 0.1167 |
| Modular approval for mobile RF Exposure conditions. Output power listed is maximum combined conducted. Device is 2x2 MIMO operating in spatial multiplexing and single chain legacy modes. Professional installation is required. The antenna(s) used for this transmitter must be installed to provide minimum separation distance of 20 cm for all from all persons. The antennas must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |