FCC ID UDX-60026010

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538

Date of Grant: 12/11/2013 Application Dated: 12/06/2013

Cisco Systems

170 West Tasman Drive

San Jose, CA 95134

Attention: Ben Calderon

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	UDX-60026010
Name of Grantee:	Cisco Systems
Equipment Class:	Digital Transmission System
Notes:	802.11 a/b/g/n Wireless Access Point with SDR

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0  -  2462.0	0.8405
CC MO	15C	5745.0  -  5825.0	0.9518

Power output listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in the 5 GHz band. 802.11 operations in the 2.4 GHz band support only 20 MHz and 40 MHz bandwidths. The antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Cisco Systems 170 West Tasman Drive San Jose, CA 95134 United States

Date of Grant: 12/11/2013 Application Dated: 12/06/2013

Attention: Ben Calderon

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	UDX-60026010
Name of Grantee:	Cisco Systems
Equipment Class:	Digital Transmission System
Notes:	802.11 a/b/g/n Wireless Access Point with SDR
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0  -  2462.0	0.8405
CC MO	15C	5745.0  -  5825.0	0.9518

Power output listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths in the 5 GHz band. 802.11 operations in the 2.4 GHz band support only 20 MHz and 40 MHz bandwidths. The antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application F18Dy8/FIHpmkAHxnjomEw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538

Date of Grant: 12/11/2013 Application Dated: 12/06/2013

Cisco Systems

170 West Tasman Drive

San Jose, CA 95134

Attention: Ben Calderon

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	UDX-60026010
Name of Grantee:	Cisco Systems
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11 a/b/g/n Wireless Access Point with SDR

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0  -  5240.0	0.0484

Power output listed is conducted. Operations in the 5.15-5.25 GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths. The antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Cisco Systems 170 West Tasman Drive San Jose, CA 95134 United States

Date of Grant: 12/11/2013 Application Dated: 12/06/2013

Attention: Ben Calderon

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	UDX-60026010
Name of Grantee:	Cisco Systems
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11 a/b/g/n Wireless Access Point with SDR
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0  -  5240.0	0.0484

Power output listed is conducted. Operations in the 5.15-5.25 GHz band are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. This device supports 20 MHz, 40 MHz and 80 MHz bandwidths. The antennas used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application DfTnEXrtgrqFTETNuE3osg==

EAS Grant - Application DfTnEXrtgrqFTETNuE3osg==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134 United States

Date of Grant: 07/08/2014 Application Dated: 02/17/2014

Attention: Aurelio Llabres

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	UDX-60026010
Name of Grantee:	Cisco Systems, Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11 a/b/g/n Wireless Access Point with SDR
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0  -  5240.0	0.0484
CC MO ND	15E	5260.0  -  5320.0	0.2049
CC MO ND	15E	5500.0  -  5580.0	0.2068
CC MO ND	15E	5660.0  -  5700.0	0.1592

This device has 20 MHz and 40 MHz bandwidth modes. Output power is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operation in 5.15-5.25 GHz band is for indoor use only.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 6AXSrL7IsCB0Hf4JvsgDLw==

Mail To:

Claire Hoque,

UL Verification Services Inc.

47173 Benicia Street

Fremont, CA 94538

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538

Date of Grant: 06/16/2016 Application Dated: 05/06/2016

Cisco Systems, Inc.

170 West Tasman Drive

San Jose, CA 95134

Attention: Aurelio Llabres

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	UDX-60026010
Name of Grantee:	Cisco Systems, Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11 a/b/g/n Wireless Access Point with SDR

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
38 CC MO	15E	5180.0  -  5240.0	0.241
38 CC MO ND	15E	5260.0  -  5320.0	0.2049
38 CC MO ND	15E	5500.0  -  5700.0	0.2068
38 CC MO ND	15E	5745.0  -  5825.0	0.1875

Class III permissive change to meet new UNII-2 band and DFS Rules per FCC ET docket No. 13-49. This device has 20 MHz and 40 MHz bandwidth modes. Output power is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operation in 5.15-5.25 GHz band is for indoor use only.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134 United States

Date of Grant: 06/16/2016 Application Dated: 05/06/2016

Attention: Aurelio Llabres

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	UDX-60026010
Name of Grantee:	Cisco Systems, Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	802.11 a/b/g/n Wireless Access Point with SDR
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
38 CC MO	15E	5180.0  -  5240.0	0.241
38 CC MO ND	15E	5260.0  -  5320.0	0.2049
38 CC MO ND	15E	5500.0  -  5700.0	0.2068
38 CC MO ND	15E	5745.0  -  5825.0	0.1875

Class III permissive change to meet new UNII-2 band and DFS Rules per FCC ET docket No. 13-49. This device has 20 MHz and 40 MHz bandwidth modes. Output power is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operation in 5.15-5.25 GHz band is for indoor use only.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: