FCC ID UFW-IBIS-KU-ETH2
Ku-band radar sensor
by IDS GeoRadar s.r.l.
Grantee Code: UFW Product Code: IBISKUETH2
Latest application date: 2021-12-01
FCC ID Device Details
| FCC ID | UFW-IBIS-KU-ETH2 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | UFW |
| Product Code | IBISKUETH2 |
| Applicant Business | IDS GeoRadar s.r.l. 🇮🇹 |
| Related Domains |  idsgeoradar.com |
| Equipment Class | Ku-band radar sensor |
| Test Firm | Nemko S.p.A. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 17100-17300 MHz | Original Equipment | 2021-12-01 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| user manual | Users Manual | 2021-12-01 | PDF 1,013.9 KB |
| internal photos Metadata only | Internal Photos | 2021-12-01 | PDF 2.6 MB |
| external photos | External Photos | 2021-12-01 | PDF 762.5 KB |
| external photos - antenna | External Photos | 2021-12-01 | PDF 453 KB |
| label | ID Label/Location Info | 2021-12-01 | PDF 28.8 KB |
| label location | ID Label/Location Info | 2021-12-01 | PDF 131.8 KB |
| test setup photos | Test Setup Photos | 2021-12-01 | PDF 609.2 KB |
| test report | Test Report | 2021-12-01 | PDF 3.6 MB |
| agent letter | Cover Letter(s) | 2021-12-01 | PDF 177.9 KB |
| confidential letter | Cover Letter(s) | 2021-12-01 | PDF 583.9 KB |
| AS06832_02 IBIS-KU ETH MODULO RF IF & CTRL_BOM Metadata only | Parts List/Tune Up Info | 2021-12-01 | PDF 93 KB |
| AS07106 Modulo AttVar IBIS20_BOM Rev03 Metadata only | Parts List/Tune Up Info | 2021-12-01 | PDF 85.6 KB |
| AS07107_04 TX Modulo RF IBIS20_BOM Metadata only | Parts List/Tune Up Info | 2021-12-01 | PDF 134.9 KB |
| AS07108_05 Scheda RX Modulo RF IBIS20_BOM Metadata only | Parts List/Tune Up Info | 2021-12-01 | PDF 135.8 KB |
| IBIS_LF_01_BOM Metadata only | Parts List/Tune Up Info | 2021-12-01 | PDF 107.9 KB |
| MPE | RF Exposure Info | 2021-12-01 | PDF 121.6 KB |
| tune up information | Parts List/Tune Up Info | 2021-12-01 | PDF 194.6 KB |
| NDA Metadata only | Internal Photos | PDF 36.6 KB | |
| block diagram Metadata only | Block Diagram | PDF 347.2 KB | |
| 859861_V03_IBIS-KU-ETH TESTA RADAR Metadata only | Schematics | PDF 549.1 KB | |
| 859862_IBIS_LF_ETH_REV01 Metadata only | Schematics | PDF 513.9 KB | |
| 924407_05 IBIS-Ku ETH RF Module 2.0 Metadata only | Schematics | PDF 462.5 KB | |
| AS02538_A_01_IBIS07_SCHEDA_TOP_MODULO_IF Metadata only | Schematics | PDF 141.9 KB | |
| AS02540_A_04_IBIS07_SCHEDA_BOTTOM_MODULO_IF Metadata only | Schematics | PDF 567.5 KB | |
| AS06833_02 IBIS-KU ETH MODULO RF IF & CTRL Metadata only | Schematics | PDF 927.2 KB | |
| AS07105 RX modulo RF IBIS20 - Schema Elettrico - R03 Metadata only | Schematics | PDF 2.1 MB | |
| ATTVAR MODULO RF IBIS 20_R01 Metadata only | Schematics | PDF 178.5 KB | |
| IBIS ACB - Schema Elettrico Metadata only | Schematics | PDF 68.9 KB | |
| IBIS IF - Schema Elettrico Metadata only | Schematics | PDF 26.7 KB | |
| as07104 tx modulo rf ibis20_R03 Metadata only | Schematics | PDF 207.4 KB | |
| operational description Metadata only | Operational Description | PDF 914.2 KB | |
| 859861_03 IBIS-Ku ETH Metadata only | Parts List/Tune Up Info | PDF 4.7 KB | |
| AS02537_A_03_IBIS07_MODULO_IF_DBM Metadata only | Parts List/Tune Up Info | PDF 92.3 KB | |
| AS02538_A REV01 IBIS07_ SCHEDA_TOP_MODULO_IF_DBM Metadata only | Parts List/Tune Up Info | PDF 64.8 KB | |
| AS02540_A_04_IBIS07_SCHEDA_BOTTOM_MODULO_IF_DBM Metadata only | Parts List/Tune Up Info | PDF 98.1 KB | |
| parts list 859861_03 IBIS-Ku ETH Metadata only | Parts List/Tune Up Info | PDF 4.7 KB |
Application Information
| Application ID | 4vxfKfs3/D2nWmNh9K5p7A== |
|---|---|
| Final Action Date | 2021-12-01 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0015281504 |
| Model | IBIS-KU-ETH2 |
| Frequency Range | 17100-17300 MHz |
| Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter |
| Device Description | Ku-band radar sensor |
| Responsible Party | Guido Manacorda, R&D; Manager, guido.manacorda@idsgeoradar.com , +39 050 8934269 |
| Test Firm | Roberto Giampaglia, Nemko S.p.A., segreteria@nemko.com  , +39 039 220 12 01 |
| TCB Email | Vina.Kerai@nemko.com |
| TCB Scope | B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz) |
| Short-Term Confidentiality | No |
| Short-Term Confidentiality Date | 01/15/2022 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is EIRP. The antenna used for this transmitter must be installed to provide a separation distance of at least 26 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product RF exposure procedures. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 4vxfKfs3/D2nWmNh9K5p7A== | 2021-12-01 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application 4vxfKfs3/D2nWmNh9K5p7A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 12/01/2021 Application Dated: 11/04/2021 |
| IDS GeoRadar s.r.l. |
| via A. Righi, 6-6A-8 |
| Pisa, 56121 Italy |
| Attention: Guido Manacorda , R&D Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UFW-IBIS-KU-ETH2 |
| Name of Grantee: | IDS GeoRadar s.r.l. |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Ku-band radar sensor |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90F | 17100.0 - 17300.0 | 4.0 | 89.0 Hz | 199MN0N |
| Power listed is EIRP. The antenna used for this transmitter must be installed to provide a separation distance of at least 26 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product RF exposure procedures. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application 4vxfKfs3/D2nWmNh9K5p7A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
IDS GeoRadar s.r.l. via A. Righi, 6-6A-8 Pisa, 56121 Italy |
Date of Grant: 12/01/2021 Application Dated: 11/04/2021 |
| Attention: Guido Manacorda , R&D Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UFW-IBIS-KU-ETH2 |
| Name of Grantee: | IDS GeoRadar s.r.l. |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Ku-band radar sensor |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90F | 17100.0 - 17300.0 | 4.0 | 89.0 Hz | 199MN0N |
| Power listed is EIRP. The antenna used for this transmitter must be installed to provide a separation distance of at least 26 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product RF exposure procedures. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |