FCC ID UGL0000181060001

Network Connection Card

by DRS Tactical Systems, Inc.

Grantee Code: UGL   Product Code: 0000181060001
Latest application date: 2007-04-03

FCC ID Device Details

FCC IDUGL0000181060001
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeUGL
Product Code0000181060001
Applicant BusinessDRS Tactical Systems, Inc. 🇺🇸
Related Domains drs-ts.com
Equipment ClassNetwork Connection Card
Test FirmTimco Engineering, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2007-04-03
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2007-04-03
2412-2462 MHzChange in identification of presently authorized equipment. Original FCC ID: PD9WM3B2915ABG Grant Date: 08/02/20042007-03-23
5180-5240 MHzChange in identification of presently authorized equipment. Original FCC ID: PD9WM3B2915ABG Grant Date: 08/02/20042007-03-23

Exhibits

DocumentTypeAvailableFile
internal photosInternal Photos2007-04-03PDF 909.8 KB
external photosExternal Photos2007-04-03PDF 225.6 KB
EXTERNAL PHOTOSExternal Photos2007-03-23PDF 137.8 KB
LABEL LOCATIONID Label/Location Info2007-03-23PDF 296.4 KB
LABEL SAMPLEID Label/Location Info2007-03-23PDF 240.8 KB
TEST REPORTTest Report2007-03-23PDF 272 KB
class II change letterCover Letter(s)2007-04-03PDF 532.9 KB
COVER LETTERCover Letter(s)2007-03-23PDF 740.2 KB
power level comparisionRF Exposure Info2007-04-03PDF 245.3 KB
power level comparisonRF Exposure Info2007-04-03PDF 245.3 KB
sar probe calibrationRF Exposure Info2007-04-03PDF 1.1 MB
sar reportRF Exposure Info2007-04-03PDF 2.1 MB
sar system validationRF Exposure Info2007-04-03PDF 646.7 KB
sar system validationsRF Exposure Info2007-04-03PDF 646.7 KB

Application Information

Application IDYzLf7wofCYfcy/sOlAkyQg==
Final Action Date2007-04-03
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0015305246
Model0000181060001
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionNetwork Connection Card
Responsible PartyAlbert Fernandez, Test Engineer, AFernandez@drs-ts.com , 321-727-3672
Test FirmSid Sanders, Timco Engineering, Inc., info@timcoengr.com , 352-472-5500
TCB Emailtei@timcoengr.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Only the type antenna(s) shown in the filing may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Change: Power Listed is conducted. This Class II Change provides a SAR Test Report in order to establish Portable Operation and Co-Location provisions for this DTS and UNII composite transmitter previously approved as a modular device. Co-location provision also includes use with a Bluetooth Laptop configured transmitter, FCC ID: UGL9800178540001. Use is limited to the specific products and antenna configurations evaluated in this filing. The modular device used within the host device, must not be co-located except as described in this composite filing. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093. Users and installers must be provided with operating conditions for satisfying RF exposure compliance. Worse case SAR Evaluated result is: Body: 0.577 W/kg.

Applications

Application IDDatePurpose
YzLf7wofCYfcy/sOlAkyQg==2007-04-03Class II permissive change or modification of presently authorized equipment
Jq/95tpakzBV/xNGdshTdw==2007-04-03Class II permissive change or modification of presently authorized equipment
h3vwHeEeEOk144lCg9FYAQ==2007-03-23Change in identification of presently authorized equipment. Original FCC ID: PD9WM3B2915ABG Grant Date: 08/02/2004
85coSom9NZfDpLGSDG/5Hw==2007-03-23Change in identification of presently authorized equipment. Original FCC ID: PD9WM3B2915ABG Grant Date: 08/02/2004

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.25115CCC
5180-5240 MHz0.04915ECC
5260-5320 MHz0.11715ECC
5725-5850 MHz0.20915CCC

Grants

TCB Grant - Application YzLf7wofCYfcy/sOlAkyQg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 04/03/2007

Application Dated: 04/03/2007
DRS Tactical Systems, Inc.
1110 West Hibiscus Blvd
Melbourne, FL 32901
 
Attention: Albert Fernandez , Test Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UGL0000181060001
Name of Grantee:  DRS Tactical Systems, Inc.
Equipment Class: Digital Transmission System
Notes: Network Connection Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.251  
CC 15C 5725.0  -  5850.0 0.209  

Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Only the type antenna(s) shown in the filing may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Class II Change: Power Listed is conducted. This Class II Change provides a SAR Test Report in order to establish Portable Operation and Co-Location provisions for this DTS and UNII composite transmitter previously approved as a modular device. Co-location provision also includes use with a Bluetooth Laptop configured transmitter, FCC ID: UGL9800178540001. Use is limited to the specific products and antenna configurations evaluated in this filing. The modular device used within the host device, must not be co-located except as described in this composite filing. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093. Users and installers must be provided with operating conditions for satisfying RF exposure compliance. Worse case SAR Evaluated result is: Body: 0.577 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application YzLf7wofCYfcy/sOlAkyQg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

DRS Tactical Systems, Inc.
1110 West Hibiscus Blvd
Melbourne, FL 32901
United States
  Date of Grant: 04/03/2007

Application Dated: 04/03/2007
 
Attention: Albert Fernandez , Test Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UGL0000181060001
Name of Grantee:  DRS Tactical Systems, Inc.
Equipment Class: Digital Transmission System
Notes: Network Connection Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.251  
CC 15C 5725.0  -  5850.0 0.209  

Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Only the type antenna(s) shown in the filing may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Class II Change: Power Listed is conducted. This Class II Change provides a SAR Test Report in order to establish Portable Operation and Co-Location provisions for this DTS and UNII composite transmitter previously approved as a modular device. Co-location provision also includes use with a Bluetooth Laptop configured transmitter, FCC ID: UGL9800178540001. Use is limited to the specific products and antenna configurations evaluated in this filing. The modular device used within the host device, must not be co-located except as described in this composite filing. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093. Users and installers must be provided with operating conditions for satisfying RF exposure compliance. Worse case SAR Evaluated result is: Body: 0.577 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA448110

TCB Grant - Application Jq/95tpakzBV/xNGdshTdw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 04/03/2007

Application Dated: 04/03/2007
DRS Tactical Systems, Inc.
1110 West Hibiscus Blvd
Melbourne, FL 32901
 
Attention: Albert Fernandez , Test Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UGL0000181060001
Name of Grantee:  DRS Tactical Systems, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Network Connection Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.049  
CC 15E 5260.0  -  5320.0 0.117  

Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Only the type antenna(s) shown in the filing may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Class II Change: Power Listed is conducted. This Class II Change provides a SAR Test Report in order to establish Portable Operation and Co-Location provisions for this DTS and UNII composite transmitter previously approved as a modular device. Co-location provision also includes use with a Bluetooth Laptop configured transmitter, FCC ID: UGL9800178540001. Use is limited to the specific products and antenna configurations evaluated in this filing. The modular device used within the host device, must not be co-located except as described in this composite filing. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093. Users and installers must be provided with operating conditions for satisfying RF exposure compliance. Worse case SAR Evaluated result is: Body: 0.577 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Jq/95tpakzBV/xNGdshTdw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

DRS Tactical Systems, Inc.
1110 West Hibiscus Blvd
Melbourne, FL 32901
United States
  Date of Grant: 04/03/2007

Application Dated: 04/03/2007
 
Attention: Albert Fernandez , Test Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UGL0000181060001
Name of Grantee:  DRS Tactical Systems, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Network Connection Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.049  
CC 15E 5260.0  -  5320.0 0.117  

Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Only the type antenna(s) shown in the filing may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Class II Change: Power Listed is conducted. This Class II Change provides a SAR Test Report in order to establish Portable Operation and Co-Location provisions for this DTS and UNII composite transmitter previously approved as a modular device. Co-location provision also includes use with a Bluetooth Laptop configured transmitter, FCC ID: UGL9800178540001. Use is limited to the specific products and antenna configurations evaluated in this filing. The modular device used within the host device, must not be co-located except as described in this composite filing. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093. Users and installers must be provided with operating conditions for satisfying RF exposure compliance. Worse case SAR Evaluated result is: Body: 0.577 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA381865

TCB Grant - Application h3vwHeEeEOk144lCg9FYAQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 03/23/2007

Application Dated: 03/23/2007
DRS Tactical Systems, Inc.
1110 West Hibiscus Blvd
Melbourne, FL 32901
 
Attention: Albert Fernandez , Test Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UGL0000181060001
Name of Grantee:  DRS Tactical Systems, Inc.
Equipment Class: Digital Transmission System
Notes: Network Connection Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.251  
CC 15C 5725.0  -  5850.0 0.209  

Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Only the type antenna(s) shown in the filing may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application h3vwHeEeEOk144lCg9FYAQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

DRS Tactical Systems, Inc.
1110 West Hibiscus Blvd
Melbourne, FL 32901
United States
  Date of Grant: 03/23/2007

Application Dated: 03/23/2007
 
Attention: Albert Fernandez , Test Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UGL0000181060001
Name of Grantee:  DRS Tactical Systems, Inc.
Equipment Class: Digital Transmission System
Notes: Network Connection Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.251  
CC 15C 5725.0  -  5850.0 0.209  

Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. Only the type antenna(s) shown in the filing may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA354260

TCB Grant - Application 85coSom9NZfDpLGSDG/5Hw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 03/23/2007

Application Dated: 03/23/2007
DRS Tactical Systems, Inc.
1110 West Hibiscus Blvd
Melbourne, FL 32901
 
Attention: Albert Fernandez , Test Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UGL0000181060001
Name of Grantee:  DRS Tactical Systems, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Network Connection Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.049  
CC 15E 5260.0  -  5320.0 0.117  

Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be Collocated or operating in conjunction with any other antenna or transmitter. Only the type antenna(s) shown in the filing may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 85coSom9NZfDpLGSDG/5Hw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

DRS Tactical Systems, Inc.
1110 West Hibiscus Blvd
Melbourne, FL 32901
United States
  Date of Grant: 03/23/2007

Application Dated: 03/23/2007
 
Attention: Albert Fernandez , Test Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UGL0000181060001
Name of Grantee:  DRS Tactical Systems, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Network Connection Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.049  
CC 15E 5260.0  -  5320.0 0.117  

Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module must be installed by the OEM or OEM integrator. Instructions on installation of this module may not be provided to the end user. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be Collocated or operating in conjunction with any other antenna or transmitter. Only the type antenna(s) shown in the filing may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA960511