FCC ID UGL980026000BT

BLUETOOTH CARD

by DRS Tactical Systems, Inc.

Grantee Code: UGL   Product Code: 980026000BT
Latest application date: 2008-04-29

FCC ID Device Details

FCC IDUGL980026000BT
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeUGL
Product Code980026000BT
Applicant BusinessDRS Tactical Systems, Inc. 🇺🇸
Related Domains drs-ts.com
Equipment ClassBLUETOOTH CARD
Test FirmTimco Engineering, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2008-04-29
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2008-04-24
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: I4L-MS6837D Grant Date: 04/14/20062008-04-01

Exhibits

DocumentTypeAvailableFile
EXTERNAL PHOTOSExternal Photos2008-04-29PDF 242.4 KB
EXTERNAL PHOTOSExternal Photos2008-04-24PDF 242.1 KB
LABEL SAMPLEID Label/Location Info2008-04-29PDF 681.4 KB
LABEL INFOID Label/Location Info2008-04-01PDF 242.2 KB
ANTENNA SPECSOperational Description2008-04-24PDF 522.4 KB
ANTENNA PHOTOSTest Setup Photos2008-04-29PDF 155 KB
TEST SETUP PHOTOSTest Setup Photos2008-04-24PDF 921.2 KB
TEST REPORTTest Report2008-04-29PDF 205.8 KB
COVER LETTERCover Letter(s)2008-04-29PDF 20.6 KB
COVER LETTERCover Letter(s)2008-04-24PDF 20.5 KB
COVER LETTERCover Letter(s)2008-04-01PDF 17.5 KB
SAR PHOTOSRF Exposure Info2008-04-29PDF 2 MB
SAR PROBE CALIBRATORRF Exposure Info2008-04-29PDF 965.5 KB
SAR REPORTRF Exposure Info2008-04-29PDF 1.5 MB
SAR SYSTEM VALIDATIONRF Exposure Info2008-04-29PDF 1.5 MB

Application Information

Application IDZ0/nBLb1BtV6TKtq/5IX7A==
Final Action Date2008-04-29
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0015305246
Model980026000BT
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionBLUETOOTH CARD
Responsible PartyAlbert Fernandez, Test Engineer, AFernandez@drs-ts.com , 321-727-3672
Test FirmSid Sanders, Timco Engineering, Inc., info@timcoengr.com , 352-472-5500
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular

Applications

Application IDDatePurpose
Z0/nBLb1BtV6TKtq/5IX7A==2008-04-29Class II permissive change or modification of presently authorized equipment
FCwaMsy6J/GD27RuS9kVbw==2008-04-24Class II permissive change or modification of presently authorized equipment
YGyz6qmnegcw81Zyf5tIhw==2008-04-01Change in identification of presently authorized equipment. Original FCC ID: I4L-MS6837D Grant Date: 04/14/2006

Equipment Authorization

FrequencyOutputRules
2402-2480 MHz0.001000015C

Grants

TCB Grant - Application Z0/nBLb1BtV6TKtq/5IX7A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 04/29/2008

Application Dated: 04/29/2008
DRS Tactical Systems, Inc.
1110 West Hibiscus Blvd
Melbourne, FL 32901
 
Attention: Albert Fernandez , Test Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UGL980026000BT
Name of Grantee:  DRS Tactical Systems, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: BLUETOOTH CARD
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.001  

Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. The OEM installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The instruction manual furnished with the intentional radiator shall contain language in the installation instructions informing the operator and the installer of this responsibility. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Original Grant dated: 04/01/2008)

Class II Change. This Class II Change adds an alternate antenna as shown in this filing. Separate approval is required for different antenna configurations. (Change date: 04/24/2008)

Class II Change: This Class II Change provides a SAR Test Report in order to establish Portable Operation and Co-Location provisions for this DSS with a DTS/NII composite transmitter previously approved as a limited modular device. Co-location provision includes use with the WLAN transmitter, FCC ID: UGL980026000WF. Use is limited to the specific products and antenna configurations evaluated in this filing. This modular device used within this host device, must not be co-located except as described in this filing. Separate approval is required for all other operating configurations. Users and installers must be provided with operating conditions for satisfying RF exposure compliance. Worse case SAR value is: Body: 1.31 W/kg.

Single Modular

EAS Grant - Application Z0/nBLb1BtV6TKtq/5IX7A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

DRS Tactical Systems, Inc.
1110 West Hibiscus Blvd
Melbourne, FL 32901
United States
  Date of Grant: 04/29/2008

Application Dated: 04/29/2008
 
Attention: Albert Fernandez , Test Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UGL980026000BT
Name of Grantee:  DRS Tactical Systems, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: BLUETOOTH CARD
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.001  

Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. The OEM installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The instruction manual furnished with the intentional radiator shall contain language in the installation instructions informing the operator and the installer of this responsibility. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. (Original Grant dated: 04/01/2008)

Class II Change. This Class II Change adds an alternate antenna as shown in this filing. Separate approval is required for different antenna configurations. (Change date: 04/24/2008)

Class II Change: This Class II Change provides a SAR Test Report in order to establish Portable Operation and Co-Location provisions for this DSS with a DTS/NII composite transmitter previously approved as a limited modular device. Co-location provision includes use with the WLAN transmitter, FCC ID: UGL980026000WF. Use is limited to the specific products and antenna configurations evaluated in this filing. This modular device used within this host device, must not be co-located except as described in this filing. Separate approval is required for all other operating configurations. Users and installers must be provided with operating conditions for satisfying RF exposure compliance. Worse case SAR value is: Body: 1.31 W/kg.

Single Modular



TCB Grant - Application YGyz6qmnegcw81Zyf5tIhw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 04/01/2008

Application Dated: 04/01/2008
DRS Tactical Systems, Inc.
1110 West Hibiscus Blvd
Melbourne, FL 32901
 
Attention: Albert Fernandez , Test Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UGL980026000BT
Name of Grantee:  DRS Tactical Systems, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: BLUETOOTH CARD
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.001  

Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. The OEM installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The instruction manual furnished with the intentional radiator shall contain language in the installation instructions informing the operator and the installer of this responsibility. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

EAS Grant - Application YGyz6qmnegcw81Zyf5tIhw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

DRS Tactical Systems, Inc.
1110 West Hibiscus Blvd
Melbourne, FL 32901
United States
  Date of Grant: 04/01/2008

Application Dated: 04/01/2008
 
Attention: Albert Fernandez , Test Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UGL980026000BT
Name of Grantee:  DRS Tactical Systems, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: BLUETOOTH CARD
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.001  

Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. The OEM installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The instruction manual furnished with the intentional radiator shall contain language in the installation instructions informing the operator and the installer of this responsibility. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.



TCB Grant - Application FCwaMsy6J/GD27RuS9kVbw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 04/24/2008

Application Dated: 04/24/2008
DRS Tactical Systems, Inc.
1110 West Hibiscus Blvd
Melbourne, FL 32901
 
Attention: Albert Fernandez , Test Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UGL980026000BT
Name of Grantee:  DRS Tactical Systems, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: BLUETOOTH CARD
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.001  

Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. The OEM installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The instruction manual furnished with the intentional radiator shall contain language in the installation instructions informing the operator and the installer of this responsibility. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

Class II Change. This Class II Change adds an alternate antenna as shown in this filing. Separate approval is required for different antenna configurations.

Single Modular

EAS Grant - Application FCwaMsy6J/GD27RuS9kVbw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

DRS Tactical Systems, Inc.
1110 West Hibiscus Blvd
Melbourne, FL 32901
United States
  Date of Grant: 04/24/2008

Application Dated: 04/24/2008
 
Attention: Albert Fernandez , Test Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UGL980026000BT
Name of Grantee:  DRS Tactical Systems, Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: BLUETOOTH CARD
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.001  

Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. The OEM installer must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification and must not be co-located or operating in conjunction with any other antenna or transmitter. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The instruction manual furnished with the intentional radiator shall contain language in the installation instructions informing the operator and the installer of this responsibility. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

Class II Change. This Class II Change adds an alternate antenna as shown in this filing. Separate approval is required for different antenna configurations.

Single Modular



Mail To: