FCC ID UIHI-SM1

GSM Quad Band Mobile Phone (I-SM1)

by ImCoSys Ltd.

Grantee Code: UIH   Product Code: ISM1
Latest application date: 2006-11-14

FCC ID Device Details

FCC IDUIHI-SM1
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeUIH
Product CodeISM1
Applicant BusinessImCoSys Ltd. 🇨🇭
Related Domains imcosys.com
Equipment ClassGSM Quad Band Mobile Phone (I-SM1)
Test FirmSGS-CSTC Standards Technical Services Co.,Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
824.2-848.8 MHzOriginal Equipment2006-11-14
2442-2462 MHzOriginal Equipment2006-11-14
2402-2480 MHzOriginal Equipment2006-11-14
824-1990 MHzOriginal Equipment2006-08-25

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2006-11-14PDF 1.3 MB
Internal PhotgraphsInternal Photos2006-11-14PDF 1.6 MB
Internal PhotographsInternal Photos2006-11-14PDF 1.6 MB
External PhotographsExternal Photos2006-11-14PDF 616.9 KB
Label InformationID Label/Location Info2006-11-14PDF 1.1 MB
Test Setup PhotographsTest Setup Photos2006-11-14PDF 203.4 KB
15C Test ReportTest Report2006-11-14PDF 1.2 MB
22 and 24 Tets ReportTest Report2006-11-14PDF 954.1 KB
Part 15C Test ReportTest Report2006-11-14PDF 1.2 MB
Part 22 and 24 Test ReportTest Report2006-11-14PDF 954.1 KB
Part 22 and Part 24 Tset ReportTest Report2006-11-14PDF 954.1 KB
RF Test ReportRF Exposure Info2006-11-14PDF 1.7 MB
SAR Test ReportRF Exposure Info2006-11-14PDF 3 MB
Test ReportTest Report2006-11-14PDF 1.4 MB
Application FormCover Letter(s)2006-11-14PDF 124.6 KB
Application FormCover Letter(s)2006-11-14PDF 124.6 KB
Application FormCover Letter(s)2006-11-14PDF 124.6 KB
Confidentiality Request LetterCover Letter(s)2006-11-14PDF 180.2 KB
GSM WLAN DeclarationCover Letter(s)2006-11-14PDF 200.7 KB
GSM WLAN Declaration StatementCover Letter(s)2006-11-14PDF 200.7 KB
GSM WLAN Declaration StatementsCover Letter(s)2006-11-14PDF 200.7 KB
RF Exposure InformationRF Exposure Info2006-11-14PDF 1.7 MB
Block Diagram Metadata onlyBlock DiagramPDF 111.6 KB
Schematics Metadata onlySchematicsPDF 411.6 KB
Operational Decsirption Metadata onlyOperational DescriptionPDF 249.9 KB
Operational Description Metadata onlyOperational DescriptionPDF 249.9 KB
Bill of Materials Metadata onlyParts List/Tune Up InfoPDF 172.6 KB

Application Information

Application IDqnT7XJLTjcFWx41CwmgJZg==
Final Action Date2006-11-14
Application PurposeOriginal Equipment
Applicant FRN0015379431
ModelI-SM1
Frequency Range824.2-848.8 MHz
Equipment ClassPCE - PCS Licensed Transmitter held to ear
Device DescriptionGSM Quad Band Mobile Phone (I-SM1)
Responsible PartyPeter Kessel, peter.kessel@imcosys.com , +41 41 710 07 20
Test FirmJune Zhang, SGS-CSTC Standards Technical Services Co.,Ltd., June.Zhang@sgs.com , 8675525328598
TCB Emailcertifications@metlabs.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output is ERP for Part 22 and EIRP for Part 24. This filing is applicable for BT, WLAN and GSM operations as demonstrated in the filing. Simultaneous operation of GSM 850/1900 and WLAN transmitter is prohibited. The antennas and transmitters in this device must be installed by the manufacturer as shown in the filing. The antennas must not be co-located or operating in conjunction with any other antenna(s) or transmitter than included in this filing. The Body-worn operations are restricted to approved belt-clips, holsters or similar accessories tested for this filing and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 1.5 cm separation between the device and the user body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The SAR compliance was evaluated with the integral BT and SD active: Part 22 Head: 0.925 W/kg; Body-worn 0.904 W/kg; PCS Band Head: 0.734 W/kg; Body-worn 0.348 W/kg. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations.

Applications

Application IDDatePurpose
qnT7XJLTjcFWx41CwmgJZg==2006-11-14Original Equipment
h5k6FqhOUvCrBVM8YaGZ4Q==2006-11-14Original Equipment
bLGFwlHtHQoCZ4CP58l/Vw==2006-11-14Original Equipment
gwYVGyXtYxUvCQk7qFlBEw==2006-08-25Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
824-1990 MHz2.00000000.1000000000ppm15C
824.2-848.8 MHz1.2852Hz246KGXW22H
1850.2-1909.8 MHz0.7246Hz249KGXW24E
2402-2480 MHz0.001970015C
2442-2462 MHz0.052000015C

Grants

TCB Grant - Application qnT7XJLTjcFWx41CwmgJZg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Electrical and Electronic Testing NA, Inc
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 11/14/2006

Application Dated: 11/14/2006
ImCoSys Ltd.
Bundesstrasse 5
Zug, 6300
Switzerland
 
Attention: Peter Kessel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UIHI-SM1
Name of Grantee:  ImCoSys Ltd.
Equipment Class: PCS Licensed Transmitter held to ear
Notes: GSM Quad Band Mobile Phone (I-SM1)
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.28 52.0  Hz 246KGXW
24E 1850.2  -  1909.8 0.72 46.0  Hz 249KGXW

Power Output is ERP for Part 22 and EIRP for Part 24. This filing is applicable for BT, WLAN and GSM operations as demonstrated in the filing. Simultaneous operation of GSM 850/1900 and WLAN transmitter is prohibited. The antennas and transmitters in this device must be installed by the manufacturer as shown in the filing. The antennas must not be co-located or operating in conjunction with any other antenna(s) or transmitter than included in this filing. The Body-worn operations are restricted to approved belt-clips, holsters or similar accessories tested for this filing and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 1.5 cm separation between the device and the user body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The SAR compliance was evaluated with the integral BT and SD active: Part 22 Head: 0.925 W/kg; Body-worn 0.904 W/kg; PCS Band Head: 0.734 W/kg; Body-worn 0.348 W/kg. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations.

EAS Grant - Application qnT7XJLTjcFWx41CwmgJZg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ImCoSys Ltd.
Bundesstrasse 5
Zug, 6300
Switzerland
  Date of Grant: 11/14/2006

Application Dated: 11/14/2006
 
Attention: Peter Kessel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UIHI-SM1
Name of Grantee:  ImCoSys Ltd.
Equipment Class: PCS Licensed Transmitter held to ear
Notes: GSM Quad Band Mobile Phone (I-SM1)
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.28 52.0  Hz 246KGXW
24E 1850.2  -  1909.8 0.72 46.0  Hz 249KGXW

Power Output is ERP for Part 22 and EIRP for Part 24. This filing is applicable for BT, WLAN and GSM operations as demonstrated in the filing. Simultaneous operation of GSM 850/1900 and WLAN transmitter is prohibited. The antennas and transmitters in this device must be installed by the manufacturer as shown in the filing. The antennas must not be co-located or operating in conjunction with any other antenna(s) or transmitter than included in this filing. The Body-worn operations are restricted to approved belt-clips, holsters or similar accessories tested for this filing and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 1.5 cm separation between the device and the user body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The SAR compliance was evaluated with the integral BT and SD active: Part 22 Head: 0.925 W/kg; Body-worn 0.904 W/kg; PCS Band Head: 0.734 W/kg; Body-worn 0.348 W/kg. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations.



TCB Grant - Application h5k6FqhOUvCrBVM8YaGZ4Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Electrical and Electronic Testing NA, Inc
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 11/14/2006

Application Dated: 11/14/2006
ImCoSys Ltd.
Bundesstrasse 5
Zug, 6300
Switzerland
 
Attention: Peter Kessel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UIHI-SM1
Name of Grantee:  ImCoSys Ltd.
Equipment Class: Digital Transmission System
Notes: GSM Quad Band Mobile Phone (I-SM1)
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2442.0  -  2462.0 0.052  

Power Output listed is conducted. This filing is applicable for BT, WLAN and GSM operations as demonstrated in the filing. Simultaneous operation of GSM 850/1900 and WLAN transmitter is prohibited. The antennas and transmitters in this device must be installed by the manufacturer as shown in the filing. The antennas must not be co-located or operating in conjunction with any other antenna(s) or transmitter than included in this filing. The Body-worn operations are restricted to approved belt-clips, holsters or similar accessories tested for this filing and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 1.5 cm separation between the device and the user body. The SAR data in this filing are applicable to demonstrate compliance for the final product. End-users and installers must be provided transmitter operating conditions for satisfying RF exposure compliance. The highest reported body worn SAR value is 0.048 W/kg. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations.

EAS Grant - Application h5k6FqhOUvCrBVM8YaGZ4Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ImCoSys Ltd.
Bundesstrasse 5
Zug, 6300
Switzerland
  Date of Grant: 11/14/2006

Application Dated: 11/14/2006
 
Attention: Peter Kessel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UIHI-SM1
Name of Grantee:  ImCoSys Ltd.
Equipment Class: Digital Transmission System
Notes: GSM Quad Band Mobile Phone (I-SM1)
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2442.0  -  2462.0 0.052  

Power Output listed is conducted. This filing is applicable for BT, WLAN and GSM operations as demonstrated in the filing. Simultaneous operation of GSM 850/1900 and WLAN transmitter is prohibited. The antennas and transmitters in this device must be installed by the manufacturer as shown in the filing. The antennas must not be co-located or operating in conjunction with any other antenna(s) or transmitter than included in this filing. The Body-worn operations are restricted to approved belt-clips, holsters or similar accessories tested for this filing and to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 1.5 cm separation between the device and the user body. The SAR data in this filing are applicable to demonstrate compliance for the final product. End-users and installers must be provided transmitter operating conditions for satisfying RF exposure compliance. The highest reported body worn SAR value is 0.048 W/kg. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations.



TCB Grant - Application gwYVGyXtYxUvCQk7qFlBEw==

This application does not exist.

EAS Grant - Application gwYVGyXtYxUvCQk7qFlBEw==

This application currently is not in final status.

TCB Grant - Application bLGFwlHtHQoCZ4CP58l/Vw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Electrical and Electronic Testing NA, Inc
914 W. Patapsco Avenue
Baltimore, MD 21230-3432
Date of Grant: 11/14/2006

Application Dated: 11/14/2006
ImCoSys Ltd.
Bundesstrasse 5
Zug, 6300
Switzerland
 
Attention: Peter Kessel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UIHI-SM1
Name of Grantee:  ImCoSys Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: GSM Quad Band Mobile Phone (I-SM1)
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.00197  

Power Output listed is conducted. This filing is applicable for BT, WLAN and GSM operations as demonstrated in the filing. Simultaneous operation of GSM 850/1900 and WLAN transmitter is prohibited. The antennas and transmitters in this device must be installed by the manufacturer as shown in the filing. The antennas must not be co-located or operating in conjunction with any other antenna(s) or transmitter than included in this filing. End-users and installers must be provided transmitter operating conditions for satisfying RF exposure compliance. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations.

EAS Grant - Application bLGFwlHtHQoCZ4CP58l/Vw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ImCoSys Ltd.
Bundesstrasse 5
Zug, 6300
Switzerland
  Date of Grant: 11/14/2006

Application Dated: 11/14/2006
 
Attention: Peter Kessel

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UIHI-SM1
Name of Grantee:  ImCoSys Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: GSM Quad Band Mobile Phone (I-SM1)
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.00197  

Power Output listed is conducted. This filing is applicable for BT, WLAN and GSM operations as demonstrated in the filing. Simultaneous operation of GSM 850/1900 and WLAN transmitter is prohibited. The antennas and transmitters in this device must be installed by the manufacturer as shown in the filing. The antennas must not be co-located or operating in conjunction with any other antenna(s) or transmitter than included in this filing. End-users and installers must be provided transmitter operating conditions for satisfying RF exposure compliance. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations.



Mail To: