FCC ID UIPSQ450M140
P-TO-MP FIXED TRANSMITTER, SCADA APPLICATIONS
by 4RF Limited
Grantee Code: UIP Product Code: SQ450M140
Latest application date: 2021-08-27
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 450-512 MHz | Class II permissive change or modification of presently authorized equipment | 2021-08-27 |
| 450-512 MHz | Original Equipment | 2014-02-13 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2014-02-13 | PDF 1.8 MB |
| Ex 9 Internal Photos | Internal Photos | 2021-08-27 | PDF 300.1 KB |
| Internal Photos Bottom | Internal Photos | 2014-02-13 | PDF 139.8 KB |
| Internal Photos Cover Off | Internal Photos | 2014-02-13 | PDF 125.4 KB |
| Internal Photos RF Chain | Internal Photos | 2014-02-13 | PDF 121.7 KB |
| Internal Photos Top PCB | Internal Photos | 2014-02-13 | PDF 101.9 KB |
| External Photos Back | External Photos | 2014-02-13 | PDF 45.8 KB |
| External Photos Bottom | External Photos | 2014-02-13 | PDF 40.6 KB |
| External Photos Front | External Photos | 2014-02-13 | PDF 50.1 KB |
| External Photos Left Side | External Photos | 2014-02-13 | PDF 40.9 KB |
| External Photos Top | External Photos | 2014-02-13 | PDF 74.9 KB |
| Label Location | ID Label/Location Info | 2014-02-13 | PDF 139.6 KB |
| Label Sample | ID Label/Location Info | 2014-02-13 | PDF 15.6 KB |
| Ex 10 Test Setup Photos | Test Setup Photos | 2021-08-27 | PDF 260.5 KB |
| Test Setup Photos 1 | Test Setup Photos | 2014-02-13 | PDF 170.5 KB |
| Test Setup Photos Rng | Test Setup Photos | 2014-02-13 | PDF 104.9 KB |
| Ex 6 EMC Test Report | Test Report | 2021-08-27 | PDF 1 MB |
| Test Report | Test Report | 2014-02-13 | PDF 553.9 KB |
| Test Report Part 90 | Test Report | 2014-02-13 | PDF 526.7 KB |
| Ex 5 C2PC Attestation Letter | Attestation Statements | 2021-08-27 | PDF 63.2 KB |
| Spectrum Attestation Letter | Cover Letter(s) | 2014-02-13 | PDF 20.3 KB |
| Ex 2 Cover Letter | Cover Letter(s) | 2021-08-27 | PDF 162.5 KB |
| Ex 3 Conf Letter | Cover Letter(s) | 2021-08-27 | PDF 50 KB |
| Exhibit 1 LOA Letter | Cover Letter(s) | 2021-08-27 | PDF 66.2 KB |
| Authorization Letter | Cover Letter(s) | 2014-02-13 | PDF 13.5 KB |
| Confidential Letter | Cover Letter(s) | 2014-02-13 | PDF 24.8 KB |
| Frequency Extension | Cover Letter(s) | 2014-02-13 | PDF 18.7 KB |
| RF Exposure | RF Exposure Info | 2014-02-13 | PDF 187.4 KB |
| Block Diagram Metadata only | Block Diagram | PDF 104.4 KB | |
| Ex 7Schematics Metadata only | Schematics | PDF 2.5 MB | |
| Schematics Metadata only | Schematics | PDF 2.4 MB | |
| Operational Description Metadata only | Operational Description | PDF 1.3 MB | |
| Ex 8 Parts List BOM Metadata only | Parts List/Tune Up Info | PDF 219.5 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 76.1 KB |
Application Information
| Application ID | RTQ+Jo8ruwtCYwCsKBVdMA== |
|---|---|
| Final Action Date | 2021-08-27 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0021732375 |
| Model | SQ450M140 |
| Frequency Range | 450-512 MHz |
| Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter |
| Device Description | P-TO-MP FIXED TRANSMITTER, SCADA APPLICATIONS |
| Responsible Party | Paul Young, paul.young@4rf.com  , +64 4 499 6000 |
| Test Firm | Ben Hewson, CELLTECH LABS INC., ben.hewson@celltechlabs.com  , 250-765-7650 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz) |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is conducted. Maximum conducted output power is 5W according to 90.205(s). The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 2.5 meters from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of § 1.1307(b)(3), for satisfying RF exposure compliance. C2PC: The Power Supply and RF sections have been updated for improvement. Minor changes have been made to the RF transmitter and receiver synthesizers and demodulator circuits. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| RTQ+Jo8ruwtCYwCsKBVdMA== | 2021-08-27 | Class II permissive change or modification of presently authorized equipment |
| iKIJKueIweRI0Xl8c61kZw== | 2014-02-13 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 450-512 MHz | 5 | 2.5ppm | 20K0D1D | 9 | EF, ES |
| 450-512 MHz | 5 | 2.5ppm | 20K0DID | 9 | EF, ES |
| 450-512 MHz | 5 | 1.5ppm | 11K3D1D | 9 | EF, ES |
| 450-512 MHz | 5 | 1.5ppm | 11K3DID | 9 | EF, ES |
| 450-521 MHz | 5 | 2.5ppm | 20K0G1D | 9 | EF, ES |
| 450-521 MHz | 5 | 2.5ppm | 20K0GID | 9 | EF, ES |
| 450-521 MHz | 5 | 1.5ppm | 11K3G1D | 9 | EF, ES |
| 450-521 MHz | 5 | 1.5ppm | 11K3GID | 9 | EF, ES |
Grants
TCB Grant - Application RTQ+Jo8ruwtCYwCsKBVdMA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 08/27/2021 Application Dated: 08/27/2021 |
| 4RF Limited |
| PO Box 13-506 Wellington 6440 |
| P.O. Box 13-506, |
| Wellington 6440, New Zealand |
| Attention: Paul Young |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UIPSQ450M140 |
| Name of Grantee: | 4RF Limited |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | P-TO-MP FIXED TRANSMITTER, SCADA APPLICATIONS |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| EF ES | 90 | 450.0 - 512.0 | 5.0 | 2.5 PM | 20K0DID |
| EF ES | 90 | 450.0 - 512.0 | 5.0 | 1.5 PM | 11K3DID |
| EF ES | 90 | 450.0 - 521.0 | 5.0 | 2.5 PM | 20K0GID |
| EF ES | 90 | 450.0 - 521.0 | 5.0 | 1.5 PM | 11K3GID |
| Power listed is conducted. Maximum conducted output power is 5W according to 90.205(s). The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 2.5 meters from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of § 1.1307(b)(3), for satisfying RF exposure compliance. C2PC: The Power Supply and RF sections have been updated for improvement. Minor changes have been made to the RF transmitter and receiver synthesizers and demodulator circuits. |
| EF: | This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization. |
| ES: | This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth. |
EAS Grant - Application RTQ+Jo8ruwtCYwCsKBVdMA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
4RF Limited PO Box 13-506 Wellington 6440 P.O. Box 13-506, Wellington 6440, New Zealand |
Date of Grant: 08/27/2021 Application Dated: 08/27/2021 |
| Attention: Paul Young |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UIPSQ450M140 |
| Name of Grantee: | 4RF Limited |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | P-TO-MP FIXED TRANSMITTER, SCADA APPLICATIONS |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| EF ES | 90 | 450.0 - 512.0 | 5.0 | 2.5 PM | 20K0DID |
| EF ES | 90 | 450.0 - 512.0 | 5.0 | 1.5 PM | 11K3DID |
| EF ES | 90 | 450.0 - 521.0 | 5.0 | 2.5 PM | 20K0GID |
| EF ES | 90 | 450.0 - 521.0 | 5.0 | 1.5 PM | 11K3GID |
| Power listed is conducted. Maximum conducted output power is 5W according to 90.205(s). The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 2.5 meters from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of § 1.1307(b)(3), for satisfying RF exposure compliance. C2PC: The Power Supply and RF sections have been updated for improvement. Minor changes have been made to the RF transmitter and receiver synthesizers and demodulator circuits. |
| EF: | This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization. |
| ES: | This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 02/13/2014 Application Dated: 02/12/2014 |
| 4RF Limited |
| PO Box 13-506 Wellington 6440 |
| P.O. Box 13-506, |
| Wellington 6440, New Zealand |
| Attention: Paul Young |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UIPSQ450M140 |
| Name of Grantee: | 4RF Limited |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | P-TO-MP FIXED TRANSMITTER, SCADA APPLICATIONS |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| EF ES | 90 | 450.0 - 512.0 | 5.0 | 2.5 PM | 20K0D1D |
| EF ES | 90 | 450.0 - 512.0 | 5.0 | 1.5 PM | 11K3D1D |
| EF ES | 90 | 450.0 - 521.0 | 5.0 | 2.5 PM | 20K0G1D |
| EF ES | 90 | 450.0 - 521.0 | 5.0 | 1.5 PM | 11K3G1D |
| Power listed is conducted. Maximum conducted output power is 5W according to 90.205(s). The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 2.5 meters from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of § 1.1307(b)(3), for satisfying RF exposure compliance. |
| EF: | This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization. |
| ES: | This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth. |
EAS Grant - Application iKIJKueIweRI0Xl8c61kZw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
4RF Limited PO Box 13-506 Wellington 6440 P.O. Box 13-506, Wellington 6440, New Zealand |
Date of Grant: 02/13/2014 Application Dated: 02/12/2014 |
| Attention: Paul Young |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UIPSQ450M140 |
| Name of Grantee: | 4RF Limited |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | P-TO-MP FIXED TRANSMITTER, SCADA APPLICATIONS |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| EF ES | 90 | 450.0 - 512.0 | 5.0 | 2.5 PM | 20K0D1D |
| EF ES | 90 | 450.0 - 512.0 | 5.0 | 1.5 PM | 11K3D1D |
| EF ES | 90 | 450.0 - 521.0 | 5.0 | 2.5 PM | 20K0G1D |
| EF ES | 90 | 450.0 - 521.0 | 5.0 | 1.5 PM | 11K3G1D |
| Power listed is conducted. Maximum conducted output power is 5W according to 90.205(s). The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 2.5 meters from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of § 1.1307(b)(3), for satisfying RF exposure compliance. |
| EF: | This device may contain functions that are not operational in U.S Territories except as noted in the filing. This grant has extended frequencies as noted in the filing and Section 2.927(b) applies to this authorization. |
| ES: | This equipment is capable of supporting a minimum data rate of 4800 bits per second per 6.25 kHz of channel bandwidth. |
| Mail To: |