FCC ID UJH-R1LOW

Display Audio

by Mitsubishi Electric Corporation Sanda Works

Grantee Code: UJH   Product Code: R1LOW
Latest application date: 2023-01-25

FCC ID Device Details

FCC IDUJH-R1LOW
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeUJH
Product CodeR1LOW
Applicant BusinessMitsubishi Electric Corporation Sanda Works 🇯🇵
Related Domains db.mitsubishielectric.co.jp
Equipment ClassDisplay Audio
Test FirmBureau Veritas CPS(H.K.) Ltd., Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5745-5825 MHzClass II permissive change or modification of presently authorized equipment2023-01-25
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2023-01-25
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2023-01-25
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-11-18
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2021-11-18
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2021-11-18
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-10-22
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-10-22
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-10-22
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-08-18
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-08-18
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-08-18
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-07-01
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-04-28
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-04-28
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-04-28
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2020-04-24
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-04-24
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2020-04-24
5180-5240 MHzOriginal Equipment2020-03-04
2402-2480 MHzOriginal Equipment2020-03-04
2402-2480 MHzOriginal Equipment2020-03-04
5180-5320 MHzOriginal Equipment2019-06-04
2402-2480 MHzOriginal Equipment2019-06-04
2402-2480 MHzOriginal Equipment2019-06-04

Exhibits

DocumentTypeAvailableFile
User manual_20200302_20_BV_OM_EN_1.pdfUsers Manual2020-08-31PDF 4.3 MB
User manual_20200302_20_BV_OM_EN_2.pdfUsers Manual2020-08-31PDF 2.3 MB
35_Photo_InternalInternal Photos2023-07-24PDF 834.7 KB
49_50_67_Photo_InternalInternal Photos2023-07-24PDF 861.6 KB
51_52_68_Photo_InternalInternal Photos2023-07-24PDF 869 KB
Internal Photos Side 1Internal Photos2022-05-17PDF 1.2 MB
Internal Photos Side 2Internal Photos2022-05-17PDF 1.1 MB
Internal Photos_20201014-052649_6_R1LOW_42_Photo_20200702Internal Photos2021-04-21PDF 983.4 KB
Internal Photos_20201014-052838_6_R1LOW_14_Photo_20200721Internal Photos2021-04-21PDF 1,004.3 KB
Internal Photos_20201014-052845_6_R1LOW_40_Photo_20200721Internal Photos2021-04-21PDF 1,002.1 KB
Internal Photos_20200728-133522_06_R1LOW_36_PhotoInternal Photos2021-02-14PDF 1.4 MB
Internal Photos_R1LOW_PCB_Photo45Internal Photos2020-10-21PDF 546.1 KB
Internal photos_12_internal_Photo v1.2.pdfInternal Photos2020-08-31PDF 916.2 KB
Internal photos_13_internal_Photo v1.2.pdfInternal Photos2020-08-31PDF 976 KB
35_Photo_ExternalExternal Photos2023-07-24PDF 503.5 KB
49_50_67_Photo_ExternalExternal Photos2023-07-24PDF 796.2 KB
51_52_68_Photo_ExternalExternal Photos2023-07-24PDF 812.2 KB
External Photos 1External Photos2022-05-17PDF 2 MB
External Photos 2External Photos2022-05-17PDF 1.6 MB
External Photos_20201014-052649_6_R1LOW_42_Photo_20200702External Photos2021-04-21PDF 1.2 MB
External Photos_20201014-052838_6_R1LOW_14_Photo_20200721External Photos2021-04-21PDF 1.3 MB
External Photos_20201014-052845_6_R1LOW_40_Photo_20200721External Photos2021-04-21PDF 1.3 MB
05_R1LOW_31_Internal-External_PhotoExternal Photos2020-10-26PDF 1.4 MB
05_R1LOW_35_Internal-External_PhotoExternal Photos2020-10-26PDF 1.9 MB
05_R1LOW_38_Internal-External_PhotoExternal Photos2020-10-26PDF 2.1 MB
External Photos_R1LOW_External_Photo45External Photos2020-10-21PDF 306.7 KB
External photos_12_External_Photo v1.1.pdfExternal Photos2020-08-31PDF 404.5 KB
External photos_13_External_Photo v1.1.pdfExternal Photos2020-08-31PDF 350.6 KB
Product LabelID Label/Location Info2021-11-18PDF 390.8 KB
Label_20201014-052742_3_14_labelID Label/Location Info2020-10-22PDF 105.6 KB
Label_20201014-052743_3_40_labelID Label/Location Info2020-10-22PDF 104.9 KB
Label_20201020-211638_3_42_label_a1ID Label/Location Info2020-10-22PDF 131.8 KB
Label_20200812-043019_05_36_Label_a2_0812ID Label/Location Info2020-08-18PDF 552.7 KB
Label_31_LabelID Label/Location Info2020-04-28PDF 220.8 KB
Label_35_LabelID Label/Location Info2020-04-28PDF 254.5 KB
Label_38_LabelID Label/Location Info2020-04-28PDF 293.3 KB
Label_45_LabelID Label/Location Info2020-04-24PDF 383.6 KB
Test Setup PhotosTest Setup Photos2023-07-24PDF 116.3 KB
Test Setup PhotosTest Setup Photos2022-05-17PDF 523 KB
Test Setup Photos R1Test Setup Photos2022-05-17PDF 582.5 KB
Test Setup Photos_20201014-052651_7_RFBHAA-WTW-P20080087 (TSup Photo)Test Setup Photos2021-04-21PDF 355.7 KB
Test Setup Photos_20200728-133524_07_RF191122C08C (TSup Photo)Test Setup Photos2021-02-14PDF 246.8 KB
Test Setup Photos_20200615-104211_05_RF191122C08D (TSup photo)Test Setup Photos2020-12-28PDF 103.6 KB
Test Setup Photos_RF191122C08C (TSup Photo)Test Setup Photos2020-10-26PDF 245.6 KB
Test Setup Photos_RF191122C08B (TSup Photo)Test Setup Photos2020-10-21PDF 100.4 KB
Test setup photos_RF191122C08 (TSup Photo).pdfTest Setup Photos2020-08-31PDF 238.5 KB
Test setup photos_RF191122C08A (DFS).pdfTest Setup Photos2020-08-31PDF 809.6 KB
Antenna informationTest Report2023-01-25PDF 598.2 KB
Test Report FCC 15.247 (BT EDR)Test Report2023-01-25PDF 453.7 KB
Test Report FCC 15.247 (BT LE)Test Report2023-01-25PDF 599.6 KB
Test Report FCC 15.247 (WLAN)Test Report2023-01-25PDF 489.4 KB
Test Report FCC 15.407 (WLAN)Test Report2023-01-25PDF 498.3 KB
Test Report (BLE)Test Report2021-11-18PDF 328.7 KB
Test Report (DSS)Test Report2021-11-18PDF 300 KB
Test Report (NII)Test Report2021-11-18PDF 1,007.9 KB
Test Report (WiFi)Test Report2021-11-18PDF 323.5 KB
Test Report_20201014-052654_9_RFBHAA-WTW-P20080145_BVJapan_R1LOW_15.247_WLAN 2.4Test Report2020-10-22PDF 579.8 KB
Test Report_20201014-052656_9_RFBHAA-WTW-P20080145-1_BVJapan_R1LOW_15.407Test Report2020-10-22PDF 572.6 KB
Test Report_20201014-052659_9_RFBHAA-WTW-P20080145-2_BVJapan_R1LOW_FCC 15.247Test Report2020-10-22PDF 559.8 KB
Test Report_20201014-052701_9_RFBHAA-WTW-P20080145-3_BVJapan_R1LOW_FCC 15.247_BTTest Report2020-10-22PDF 587.3 KB
Test Report_20201014-052705_9_RFBHAA-WTW-P20080145-4_BV Japan_R1LOW_FCC 15.407_DTest Report2020-10-22PDF 1.1 MB
Test Report_20201014-052720_9_RFBHAA-WTW-P20080145-5_BV Japan_R1LOW_FCC 15.407_DTest Report2020-10-22PDF 4.1 MB
Test Report_20201014-052721_9_SA191122C08 R1_BVJapan_R1LOW_FCC MPERF Exposure Info2020-10-22PDF 60.2 KB
Test Report_20200728-133526_08_RF191122C08E_BVJapan_R1LOW_15.247_WLAN_2.4GTest Report2020-08-18PDF 397.4 KB
Test Report_20200728-133528_08_RF191122C08E-1_BVJapan_R1LOW_15.407_WLAN_5GTest Report2020-08-18PDF 412.4 KB
Test Report_20200728-133529_08_RF191122C08E-2_BVJapan_R1LOW_FCC 15.247_BT EDRTest Report2020-08-18PDF 399.1 KB
Test Report_20200728-133532_08_RF191122C08E-3_BVJapan_R1LOW_FCC 15.247_BT LETest Report2020-08-18PDF 458.8 KB
Test Report_20200728-133535_08_RF191122C08E-4_BV Japan_R1LOW_FCC 15.407_WLAN_DFSTest Report2020-08-18PDF 851.7 KB
Test Report_20200728-133551_08_RF191122C08E-5_BV Japan_R1LOW_FCC 15.407_WLAN_DFSTest Report2020-08-18PDF 3.8 MB
Test Report_20200615-104207_04_RF191122C08D_BV Japan_R1LOW_FCC 15.407_DFS (MasteTest Report2020-07-01PDF 3.9 MB
Test Report_RF191122C08C-1_BVJapan_R1LOW_FCC 15.407 NIITest Report2020-04-28PDF 207.9 KB
Test Report_RF191122C08C-2_BVJapan_R1LOW_FCC 15.247 (BT EDR) DSSTest Report2020-04-28PDF 199.3 KB
Test Report_RF191122C08C-3_BVJapan_R1LOW_FCC 15.247 (BT LE)Test Report2020-04-28PDF 227.3 KB
Test Report_RF191122C08C_BVJapan_R1LOW_FCC 15.247 (WLAN_2.4G)Test Report2020-04-28PDF 223.7 KB
Test Report_14a_RF191122C08B R1_BVJapan_R1LOW_FCC 15.247 (WLAN)Test Report2020-04-24PDF 210.2 KB
Test Report_14b_RF191122C08B-2 R1_BVJapan_R1LOW_FCC 15.247 (BT EDR)Test Report2020-04-24PDF 185.8 KB
Test Report_14c_RF191122C08B-3 R1_BVJapan_R1LOW_FCC 15.247 (BT LE)Test Report2020-04-24PDF 204.9 KB
Test Report_14d_RF191122C08B-1 R1_BVJapan_R1LOW_FCC 15.407Test Report2020-04-24PDF 195.2 KB
Confidentiality Request LetterAttestation Statements2023-01-25PDF 752.4 KB
Permissive Change LetterAttestation Statements2023-01-25PDF 282.2 KB
Confidentiality Request LetterCover Letter(s)2023-01-25PDF 752.4 KB
Permissive Change LetterCover Letter(s)2023-01-25PDF 282.2 KB
Permissive Change LetterCover Letter(s)2023-01-25PDF 308 KB
Power of AttorneyCover Letter(s)2023-01-25PDF 293.8 KB
Class II Permissive Change LetterCover Letter(s)2021-11-18PDF 242 KB
Confidentiality Request Letter (Long-term)Cover Letter(s)2021-11-18PDF 204.5 KB
Confidentiality Request Letter (Short-term)Cover Letter(s)2021-11-18PDF 166.5 KB
DFS Band DeclarationCover Letter(s)2021-11-18PDF 417.4 KB
PoACover Letter(s)2021-11-18PDF 194.6 KB
Confidentiality Request_20201014-052740_2_Cover Letter-Confidentiality(long-termCover Letter(s)2020-10-22PDF 245.4 KB
Confidentiality Request_20201014-052742_2_Cover Letter-Confidentiality(short-terCover Letter(s)2020-10-22PDF 198.7 KB
Other_20201014-052652_8_Description of Permissive Change_42_14_40Cover Letter(s)2020-10-22PDF 227.3 KB
Confidentiality Req._20200728-133607_03_Cover Letter-Confidentiality (long-term)Cover Letter(s)2020-08-18PDF 419.1 KB
Confidentiality Req._20200728-133609_03_Cover Letter-Confidentiality (short-termCover Letter(s)2020-08-18PDF 344.8 KB
Letter_20200728-133605_02_36_Description of Permissive ChangeCover Letter(s)2020-08-18PDF 339.3 KB
Confidentiality Req._20200615-104215_02_Cover Letter-Confidentiality (short-termCover Letter(s)2020-07-01PDF 147.8 KB
Letter_20200615-104219_03_Description of Permissive Change_Melco_signedCover Letter(s)2020-07-01PDF 172.4 KB
Cover Letter_Confidentiality (long-term)_313835_signedCover Letter(s)2020-04-28PDF 290.8 KB
Cover Letter_Confidentiality (short-term)_313835_signedCover Letter(s)2020-04-28PDF 250.1 KB
Cover Letter_Description of Permissive Change_Melco_signedCover Letter(s)2020-04-28PDF 164.7 KB
Cover Letter-Confidentiality (long-term)_45_signed_rev1Cover Letter(s)2020-04-24PDF 290.8 KB
Cover Letter-Confidentiality (short-term)_45_signed_rev1Cover Letter(s)2020-04-24PDF 250.2 KB
Cover Letter_Description of Permissive Change_45Cover Letter(s)2020-04-24PDF 169.7 KB
RF ExposureRF Exposure Info2021-11-18PDF 174.4 KB
RF Exposure ReportRF Exposure Info2021-11-18PDF 174.4 KB
RF191122C08_BVJapan_R1LOW_FCC 15.247 (WLAN 2.4G)RF Exposure Info2020-04-24PDF 1.2 MB

Application Information

Application IDyCTnNpeOKiFbXbYswRfM9Q==
Final Action Date2023-01-25
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0015427370
ModelR1LOW
Frequency Range5745-5825 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionDisplay Audio
Responsible PartyRyuji Yoshinaga, yoshinaga.ryuji@db.mitsubishielectric.co.jp , 81-79-559-4813
Test FirmEric Lin, Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch, eric-wp.lin@bureauveritas.com , +886-3-2600858
TCB EmailCERTIFICATION@BUREAUVERITAS.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date07/24/2023
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change to add new models with digital device changes and new LCD Driver Integrated Circuit. Power listed is the maximum combined conducted output power. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. This device has 20MHz, 40MHz, and 80MHz bandwidth modes.

Applications

Application IDDatePurpose
yCTnNpeOKiFbXbYswRfM9Q==2023-01-25Class II permissive change or modification of presently authorized equipment
dL2hJnA7QplX0KOIiCshaQ==2023-01-25Class II permissive change or modification of presently authorized equipment
LoEOKnQfZlhaSTZfpxZxqw==2023-01-25Class II permissive change or modification of presently authorized equipment
xUNtVAXS4uZf3j3iaV8tVg==2021-11-18Class II permissive change or modification of presently authorized equipment
TZyW8j6mlPkXWEXwBIjiTQ==2021-11-18Class II permissive change or modification of presently authorized equipment
Fx+xOs0uPOAVl0BvRfXgXA==2021-11-18Class II permissive change or modification of presently authorized equipment
uZiO9Iia+DDhWg+w3sS+ng==2020-10-22Class II permissive change or modification of presently authorized equipment
JQvmF0u0cR2l6S0JuidIDg==2020-10-22Class II permissive change or modification of presently authorized equipment
/G3jv/knkRwvDINA5qe+hQ==2020-10-22Class II permissive change or modification of presently authorized equipment
WTgMh8vV/mlTywapAddUpw==2020-08-18Class II permissive change or modification of presently authorized equipment
VlJElPoVyPLQ1+qzBRvprQ==2020-08-18Class II permissive change or modification of presently authorized equipment
Mk4SirlQucyW2gmj92dWcA==2020-08-18Class II permissive change or modification of presently authorized equipment
W+uAfA+tEGApcmStXpL4hA==2020-07-01Class II permissive change or modification of presently authorized equipment
ko8UZy+YgsqDWtRtoObeNg==2020-04-28Class II permissive change or modification of presently authorized equipment
ZqcCkQKM0yL6mvLz7Afxvg==2020-04-28Class II permissive change or modification of presently authorized equipment
MO+AIwTfnnkq1khx0PkdAg==2020-04-28Class II permissive change or modification of presently authorized equipment
uCKZdq0ABchV133rUmD0Cw==2020-04-24Class II permissive change or modification of presently authorized equipment
n/DNzLHCiHbCHsYuSofiYg==2020-04-24Class II permissive change or modification of presently authorized equipment
UXy3AcrdiQUaVOt5+Ly85A==2020-04-24Class II permissive change or modification of presently authorized equipment
t3ZRpNzskfEITLvyBVpIPQ==2020-03-04Original Equipment
XtRCEOIY96RlijDdhUeFyQ==2020-03-04Original Equipment
/and5VbPXCvWiTRu861T0A==2020-03-04Original Equipment
jkiqNZbtgdylpJdyyecmXw==2019-06-04Original Equipment
OHWp+/iZ7RnfXJK2R56G4A==2019-06-04Original Equipment
7KGHD3VQMaV2/CQLOzDq8Q==2019-06-04Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.000800015CCC
2402-2480 MHz0.002615CCC
2402-2480 MHz0.001200015CCC
2402-2480 MHz0.001115CCC
2402-2480 MHz0.002315CCC
2412-2462 MHz0.028315CCC, MO
2412-2462 MHz0.146415CCC, MO
2412-2462 MHz0.028515CCC, MO
5180-5320 MHz0.004815ECC, MO
5180-5240 MHz0.004315ECC, MO
5180-5240 MHz0.004315ECC, MO, ND
5180-5240 MHz0.004315EMO, ND
5260-5320 MHz0.004615ECC, MO, ND
5500-5700 MHz0.004215ECC, MO
5500-5700 MHz0.004715ECC, MO, ND
5500-5720 MHz0.004715ECC, MO, ND
5745-5825 MHz0.004415ECC, MO
5745-5825 MHz0.004415ECC, MO, ND

Grants

TCB Grant - Application ZqcCkQKM0yL6mvLz7Afxvg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 04/28/2020

Application Dated: 04/28/2020
Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJH-R1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Display Audio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0008  

Class II Permissive Change as documented in this filing Output power listed is conducted. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application ZqcCkQKM0yL6mvLz7Afxvg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
  Date of Grant: 04/28/2020

Application Dated: 04/28/2020
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJH-R1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Display Audio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0008  

Class II Permissive Change as documented in this filing Output power listed is conducted. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application yCTnNpeOKiFbXbYswRfM9Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 01/25/2023

Application Dated: 01/23/2023
Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJH-R1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Display Audio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0043  
CC MO ND 15E 5260.0  -  5320.0 0.0046  
CC MO ND 15E 5500.0  -  5700.0 0.0047  
CC MO 15E 5745.0  -  5825.0 0.0044  

Class II Permissive Change to add new models with digital device changes and new LCD Driver Integrated Circuit. Power listed is the maximum combined conducted output power. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. This device has 20MHz, 40MHz, and 80MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application yCTnNpeOKiFbXbYswRfM9Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
  Date of Grant: 01/25/2023

Application Dated: 01/23/2023
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJH-R1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Display Audio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0043  
CC MO ND 15E 5260.0  -  5320.0 0.0046  
CC MO ND 15E 5500.0  -  5700.0 0.0047  
CC MO 15E 5745.0  -  5825.0 0.0044  

Class II Permissive Change to add new models with digital device changes and new LCD Driver Integrated Circuit. Power listed is the maximum combined conducted output power. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. This device has 20MHz, 40MHz, and 80MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application xUNtVAXS4uZf3j3iaV8tVg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 11/18/2021

Application Dated: 11/18/2021
Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJH-R1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Digital Transmission System
Notes: Display Audio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0026  
CC MO 15C 2412.0  -  2462.0 0.0283  

Class II Permissive Change for additional model variants. Power listed is the maximum combined conducted power. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjuction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. This device has 20 MHz bandwidth mode.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application xUNtVAXS4uZf3j3iaV8tVg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
  Date of Grant: 11/18/2021

Application Dated: 11/18/2021
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJH-R1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Digital Transmission System
Notes: Display Audio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0026  
CC MO 15C 2412.0  -  2462.0 0.0283  

Class II Permissive Change for additional model variants. Power listed is the maximum combined conducted power. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjuction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. This device has 20 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application XtRCEOIY96RlijDdhUeFyQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 03/04/2020

Application Dated: 03/04/2020
Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJH-R1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Digital Transmission System
Notes: Display Audio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0026  
CC MO 15C 2412.0  -  2462.0 0.0283  

Power listed is the maximum combined conducted output power. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. This device has 20 MHz bandwidth mode.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application XtRCEOIY96RlijDdhUeFyQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
  Date of Grant: 03/04/2020

Application Dated: 03/04/2020
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJH-R1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Digital Transmission System
Notes: Display Audio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0026  
CC MO 15C 2412.0  -  2462.0 0.0283  

Power listed is the maximum combined conducted output power. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. This device has 20 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application WTgMh8vV/mlTywapAddUpw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 08/18/2020

Application Dated: 08/18/2020
Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJH-R1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Display Audio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO ND 15E 5180.0  -  5240.0 0.0043  
CC MO ND 15E 5260.0  -  5320.0 0.0046  
CC MO ND 15E 5500.0  -  5700.0 0.0047  
CC MO ND 15E 5745.0  -  5825.0 0.0044  

Class II Permissive Change as described in this filing. Power listed is the maximum combined conducted output power. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. This device has 20MHz, 40MHz, and 80MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application WTgMh8vV/mlTywapAddUpw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
  Date of Grant: 08/18/2020

Application Dated: 08/18/2020
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJH-R1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Display Audio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO ND 15E 5180.0  -  5240.0 0.0043  
CC MO ND 15E 5260.0  -  5320.0 0.0046  
CC MO ND 15E 5500.0  -  5700.0 0.0047  
CC MO ND 15E 5745.0  -  5825.0 0.0044  

Class II Permissive Change as described in this filing. Power listed is the maximum combined conducted output power. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. This device has 20MHz, 40MHz, and 80MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application W+uAfA+tEGApcmStXpL4hA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 07/01/2020

Application Dated: 06/24/2020
Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJH-R1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Display Audio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0043  
CC MO ND 15E 5260.0  -  5320.0 0.0046  
CC MO ND 15E 5500.0  -  5700.0 0.0047  
CC MO 15E 5745.0  -  5825.0 0.0044  

Class II Permissive Change as described in this filing. Power listed is the maximum combined conducted output power. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. This device has 20MHz, 40MHz, and 80MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application W+uAfA+tEGApcmStXpL4hA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
  Date of Grant: 07/01/2020

Application Dated: 06/24/2020
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJH-R1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Display Audio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0043  
CC MO ND 15E 5260.0  -  5320.0 0.0046  
CC MO ND 15E 5500.0  -  5700.0 0.0047  
CC MO 15E 5745.0  -  5825.0 0.0044  

Class II Permissive Change as described in this filing. Power listed is the maximum combined conducted output power. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. This device has 20MHz, 40MHz, and 80MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application VlJElPoVyPLQ1+qzBRvprQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 08/18/2020

Application Dated: 08/18/2020
Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJH-R1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Digital Transmission System
Notes: Display Audio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.0285  
CC 15C 2402.0  -  2480.0 0.0023  

Class II Permissive Change as described in this filing. Power listed is the maximum combined conducted output power. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. This device has 20 MHz bandwidth mode.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application VlJElPoVyPLQ1+qzBRvprQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
  Date of Grant: 08/18/2020

Application Dated: 08/18/2020
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJH-R1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Digital Transmission System
Notes: Display Audio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.0285  
CC 15C 2402.0  -  2480.0 0.0023  

Class II Permissive Change as described in this filing. Power listed is the maximum combined conducted output power. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. This device has 20 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application uZiO9Iia+DDhWg+w3sS+ng==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 10/22/2020

Application Dated: 10/21/2020
Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJH-R1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Display Audio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO ND 15E 5180.0  -  5240.0 0.0043  
CC MO ND 15E 5260.0  -  5320.0 0.0046  
CC MO ND 15E 5500.0  -  5700.0 0.0047  
CC MO ND 15E 5745.0  -  5825.0 0.0044  

Class II Permissive Change as described in this filing. Power listed is the maximum combined conducted output power. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. This device has 20MHz, 40MHz, and 80MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application uZiO9Iia+DDhWg+w3sS+ng==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
  Date of Grant: 10/22/2020

Application Dated: 10/21/2020
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJH-R1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Display Audio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO ND 15E 5180.0  -  5240.0 0.0043  
CC MO ND 15E 5260.0  -  5320.0 0.0046  
CC MO ND 15E 5500.0  -  5700.0 0.0047  
CC MO ND 15E 5745.0  -  5825.0 0.0044  

Class II Permissive Change as described in this filing. Power listed is the maximum combined conducted output power. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. This device has 20MHz, 40MHz, and 80MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application UXy3AcrdiQUaVOt5+Ly85A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 04/24/2020

Application Dated: 04/24/2020
Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJH-R1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Digital Transmission System
Notes: Dispaly Audio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0026  
CC MO 15C 2412.0  -  2462.0 0.0283  

Class II Permissive Change as documented in this filing Power listed is the maximum combined conducted output power. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. This device has 20 MHz bandwidth mode.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application UXy3AcrdiQUaVOt5+Ly85A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
  Date of Grant: 04/24/2020

Application Dated: 04/24/2020
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJH-R1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Digital Transmission System
Notes: Dispaly Audio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0026  
CC MO 15C 2412.0  -  2462.0 0.0283  

Class II Permissive Change as documented in this filing Power listed is the maximum combined conducted output power. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. This device has 20 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application uCKZdq0ABchV133rUmD0Cw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 04/24/2020

Application Dated: 04/24/2020
Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJH-R1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Display Audio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0043  
CC MO ND 15E 5260.0  -  5320.0 0.0046  
CC MO ND 15E 5500.0  -  5700.0 0.0047  
CC MO 15E 5745.0  -  5825.0 0.0044  

Class II Permissive Change as documented in this filing Power listed is the maximum combined conducted output power. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. This device has 20MHz, 40MHz, and 80MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application uCKZdq0ABchV133rUmD0Cw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
  Date of Grant: 04/24/2020

Application Dated: 04/24/2020
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJH-R1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Display Audio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0043  
CC MO ND 15E 5260.0  -  5320.0 0.0046  
CC MO ND 15E 5500.0  -  5700.0 0.0047  
CC MO 15E 5745.0  -  5825.0 0.0044  

Class II Permissive Change as documented in this filing Power listed is the maximum combined conducted output power. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. This device has 20MHz, 40MHz, and 80MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application TZyW8j6mlPkXWEXwBIjiTQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 11/18/2021

Application Dated: 11/18/2021
Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJH-R1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Display Audio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0043  
CC MO ND 15E 5260.0  -  5320.0 0.0046  
CC MO ND 15E 5500.0  -  5720.0 0.0047  
CC MO 15E 5745.0  -  5825.0 0.0044  

Class II Permissive Change to add straddle channels in the U-NII2C and U-NII3 bands via firmware and additional model variants. Power listed is the maximum combined conducted output power. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. This device has 20MHz, 40MHz, and 80MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application TZyW8j6mlPkXWEXwBIjiTQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
  Date of Grant: 11/18/2021

Application Dated: 11/18/2021
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJH-R1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Display Audio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0043  
CC MO ND 15E 5260.0  -  5320.0 0.0046  
CC MO ND 15E 5500.0  -  5720.0 0.0047  
CC MO 15E 5745.0  -  5825.0 0.0044  

Class II Permissive Change to add straddle channels in the U-NII2C and U-NII3 bands via firmware and additional model variants. Power listed is the maximum combined conducted output power. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. This device has 20MHz, 40MHz, and 80MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application t3ZRpNzskfEITLvyBVpIPQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 03/04/2020

Application Dated: 03/04/2020
Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJH-R1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Display Audio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0043  
CC MO ND 15E 5260.0  -  5320.0 0.0046  
CC MO ND 15E 5500.0  -  5700.0 0.0047  
CC MO 15E 5745.0  -  5825.0 0.0044  

Power listed is the maximum combined conducted output power. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. This device has 20MHz, 40MHz, and 80MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application t3ZRpNzskfEITLvyBVpIPQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
  Date of Grant: 03/04/2020

Application Dated: 03/04/2020
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJH-R1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Display Audio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0043  
CC MO ND 15E 5260.0  -  5320.0 0.0046  
CC MO ND 15E 5500.0  -  5700.0 0.0047  
CC MO 15E 5745.0  -  5825.0 0.0044  

Power listed is the maximum combined conducted output power. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. This device has 20MHz, 40MHz, and 80MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application OHWp+/iZ7RnfXJK2R56G4A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Japan, Inc.
4383-326 Asama-cho
Ise-shi Mie, 5160021
Japan
Date of Grant: 06/04/2019

Application Dated: 06/04/2019
Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJHR1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Display Audio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0012  

Output power listed is Conducted(Peak). For professional installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application OHWp+/iZ7RnfXJK2R56G4A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
  Date of Grant: 06/04/2019

Application Dated: 06/04/2019
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJHR1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Display Audio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0012  

Output power listed is Conducted(Peak). For professional installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application n/DNzLHCiHbCHsYuSofiYg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 04/24/2020

Application Dated: 04/24/2020
Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJH-R1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Display Audio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0008  

Class II Permissive Change as documented in this filing Output power listed is conducted. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application n/DNzLHCiHbCHsYuSofiYg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
  Date of Grant: 04/24/2020

Application Dated: 04/24/2020
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJH-R1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Display Audio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0008  

Class II Permissive Change as documented in this filing Output power listed is conducted. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application MO+AIwTfnnkq1khx0PkdAg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 04/28/2020

Application Dated: 04/28/2020
Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJH-R1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Dispaly Audio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0043  
CC MO ND 15E 5260.0  -  5320.0 0.0046  
CC MO ND 15E 5500.0  -  5700.0 0.0047  
CC MO 15E 5745.0  -  5825.0 0.0044  

Class II Permissive Change as documented in this filing Power listed is the maximum combined conducted output power. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. This device has 20MHz, 40MHz, and 80MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application MO+AIwTfnnkq1khx0PkdAg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
  Date of Grant: 04/28/2020

Application Dated: 04/28/2020
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJH-R1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Dispaly Audio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0043  
CC MO ND 15E 5260.0  -  5320.0 0.0046  
CC MO ND 15E 5500.0  -  5700.0 0.0047  
CC MO 15E 5745.0  -  5825.0 0.0044  

Class II Permissive Change as documented in this filing Power listed is the maximum combined conducted output power. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. This device has 20MHz, 40MHz, and 80MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application Mk4SirlQucyW2gmj92dWcA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 08/18/2020

Application Dated: 08/18/2020
Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJH-R1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Display Audio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0008  

Class II Permissive Change as documented in this filing Output power listed is conducted. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Mk4SirlQucyW2gmj92dWcA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
  Date of Grant: 08/18/2020

Application Dated: 08/18/2020
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJH-R1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Display Audio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0008  

Class II Permissive Change as documented in this filing Output power listed is conducted. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application LoEOKnQfZlhaSTZfpxZxqw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 01/25/2023

Application Dated: 01/23/2023
Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJH-R1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Digital Transmission System
Notes: Display Audio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0026  
CC MO 15C 2412.0  -  2462.0 0.0283  

Class II Permissive Change to add new models with digital device changes and new LCD Driver Integrated Circuit. Power listed is the maximum combined conducted output power. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. This device has 20 MHz bandwidth mode.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application LoEOKnQfZlhaSTZfpxZxqw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
  Date of Grant: 01/25/2023

Application Dated: 01/23/2023
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJH-R1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Digital Transmission System
Notes: Display Audio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0026  
CC MO 15C 2412.0  -  2462.0 0.0283  

Class II Permissive Change to add new models with digital device changes and new LCD Driver Integrated Circuit. Power listed is the maximum combined conducted output power. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. This device has 20 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application ko8UZy+YgsqDWtRtoObeNg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 04/28/2020

Application Dated: 04/28/2020
Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJH-R1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Digital Transmission System
Notes: Display Audio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0026  
CC MO 15C 2412.0  -  2462.0 0.0283  

Class II Permissive Change as documented in this filing Power listed is the maximum combined conducted output power. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. This device has 20 MHz bandwidth mode.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application ko8UZy+YgsqDWtRtoObeNg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
  Date of Grant: 04/28/2020

Application Dated: 04/28/2020
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJH-R1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Digital Transmission System
Notes: Display Audio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0026  
CC MO 15C 2412.0  -  2462.0 0.0283  

Class II Permissive Change as documented in this filing Power listed is the maximum combined conducted output power. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. This device has 20 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application JQvmF0u0cR2l6S0JuidIDg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 10/22/2020

Application Dated: 10/21/2020
Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJH-R1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Display Audio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0008  

Class II Permissive Change as documented in this filing Output power listed is conducted. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application JQvmF0u0cR2l6S0JuidIDg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
  Date of Grant: 10/22/2020

Application Dated: 10/21/2020
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJH-R1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Display Audio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0008  

Class II Permissive Change as documented in this filing Output power listed is conducted. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application jkiqNZbtgdylpJdyyecmXw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Japan, Inc.
4383-326 Asama-cho
Ise-shi Mie, 5160021
Japan
Date of Grant: 06/04/2019

Application Dated: 06/04/2019
Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJHR1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Display Audio
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5320.0 0.0048  
CC MO 15E 5500.0  -  5700.0 0.0042  
CC MO 15E 5745.0  -  5825.0 0.0044  

Output power listed is Conducted. For professional installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes for 5 GHz bands. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application jkiqNZbtgdylpJdyyecmXw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Mitsubishi Electric Corporation Sanda Works
2-3-33, Miwa, Sanda-city
Hyogo, 669-1513
Japan
  Date of Grant: 06/04/2019

Application Dated: 06/04/2019
 
Attention: Ryuji Yoshinaga

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UJHR1LOW
Name of Grantee:  Mitsubishi Electric Corporation Sanda Works
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Display Audio
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5320.0 0.0048  
CC MO 15E 5500.0  -  5700.0 0.0042  
CC MO 15E 5745.0  -  5825.0 0.0044  

Output power listed is Conducted. For professional installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes for 5 GHz bands. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: