1. FCC ID
  2. UK2
  3. UK2-SIL-SK63100

FCC ID UK2-SIL-SK63100

60GHz WirelessHD Display Mini Card Transmitter

by Lattice Semiconductor Corporation

Grantee Code: UK2   Product Code: SILSK63100
Latest application date: 2013-08-15

FCC ID Device Details

FCC IDUK2-SIL-SK63100
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeUK2
Product CodeSILSK63100
Applicant BusinessLattice Semiconductor Corporation 🇺🇸
Related Domains latticesemi.com
Equipment Class60GHz WirelessHD Display Mini Card Transmitter
Test FirmCompliance Certification Services (UL CCS)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
60163-62957 MHzOriginal Equipment2013-08-15
60163-62957 MHzClass II permissive change or modification of presently authorized equipment2013-08-15

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2013-08-15PDF 470.9 KB
ManualUsers Manual2012-12-10PDF 1.4 MB
revised OEM ManualUsers Manual2012-12-10PDF 1.2 MB
revised OEM installation manual 05-25-2012Users Manual2012-12-10PDF 1.3 MB
Internal PhotosInternal Photos2012-12-10PDF 498.4 KB
External PhotosExternal Photos2012-12-10PDF 1.1 MB
LabelID Label/Location Info2013-08-15PDF 211.3 KB
revised labelID Label/Location Info2013-08-15PDF 64.8 KB
Photos Test Setup Original Rev3ETest Setup Photos2013-09-29PDF 267.9 KB
Setup PhotosTest Setup Photos2012-12-10PDF 421.1 KB
revised setup photos -25-2012Test Setup Photos2012-12-10PDF 299.4 KB
MPE ReportTest Report2013-08-15PDF 206.3 KB
ReportTest Report2013-08-15PDF 1.2 MB
Test Report C2PC Rev1BTest Report2013-08-15PDF 77.2 KB
Test Report Original Rev3ETest Report2013-08-15PDF 825 KB
Test Report Review ConfirmationAttestation Statements2013-08-15PDF 289.9 KB
revised report 5-25-2012Test Report2013-08-15PDF 976.1 KB
Attestation LetterAttestation Statements2013-08-15PDF 289.9 KB
Agent Authorization LetterCover Letter(s)2013-08-15PDF 372.2 KB
Agent LetterCover Letter(s)2013-08-15PDF 654.4 KB
C2PC LetterCover Letter(s)2013-08-15PDF 285.1 KB
Confidentiality LetterCover Letter(s)2013-08-15PDF 188.7 KB
FCC Q and A 5-25-2012Cover Letter(s)2013-08-15PDF 59.3 KB
FCC Q and A June 1, 2012Cover Letter(s)2013-08-15PDF 46.7 KB
FCC Q and A June 7, 2012Cover Letter(s)2013-08-15PDF 53 KB
FCC Q and A June 8, 2012Cover Letter(s)2013-08-15PDF 6.9 KB
Modular Approval LetterCover Letter(s)2013-08-15PDF 16.3 KB
Short-Term Confidentiality Extension RequestCover Letter(s)2013-08-15PDF 188.7 KB
Signature Authorization LetterCover Letter(s)2013-08-15PDF 152.1 KB
answer to Correspondence 41786Cover Letter(s)2013-08-15PDF 14.4 KB
RF Exposure Original Rev3ERF Exposure Info2013-08-15PDF 160.3 KB
RF exposureRF Exposure Info2013-08-15PDF 275.5 KB
revised MPERF Exposure Info2013-08-15PDF 579.8 KB

Application Information

Application IDshqH3jMnVSap79FcT4jPiA==
Final Action Date2013-08-15
Application PurposeOriginal Equipment
Applicant FRN0025031550
Model-SIL-SK63100
Frequency Range60163-62957 MHz
Equipment ClassDXX - Part 15 Low Power Communication Device Transmitter
Device Description60GHz WirelessHD Display Mini Card Transmitter
Responsible PartyKirstin M Fredrickson, Corporate Compliance Manager, kirstin.fredrickson@latticesemi.com , 503-268-8596
Technical ContactClaire Hoque, UL CCS, claire.hoque@ul.com , (510) 771-1000
Test FirmBarbara Judge, Compliance Certification Services (UL CCS), barbara.judge@ccsemc.com , 510-771-1104
Short-Term ConfidentialityYes
Short-Term Confidentiality Date12/10/2012
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsThis application was originally granted on 06/13/2012; grant revised as of 08/15/2013 to reflect changes as noted in the exhibit(s) contained in the Attestation Statements exhibit folder.

Applications

Application IDDatePurpose
shqH3jMnVSap79FcT4jPiA==2013-08-15Original Equipment
rRJCizzaCZ3705QqmBY/7g==2013-08-15Class II permissive change or modification of presently authorized equipment

Equipment Authorization

FrequencyOutputRules
60163-62957 MHz0.066115C
60480-62640 MHz0.044715C
60480-62640 MHz0.050115C

Grants

TCB Grant - Application shqH3jMnVSap79FcT4jPiA==

This application does not exist.

EAS Grant - Application shqH3jMnVSap79FcT4jPiA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Lattice Semiconductor Corporation
2115 O'Nel Drive
San Jose, CA 95131
United States 		  Date of Grant: 08/15/2013

Application Dated: 05/03/2012
 
Attention: Scott Ruan , Sr. Manager, Wireless Application Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UK2-SIL-SK63100
Name of Grantee:  Lattice Semiconductor Corporation
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: 60GHz WirelessHD Display Mini Card Transmitter
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 60163.0  -  62957.0 0.0661  
15C 60480.0  -  62640.0 0.0447  
15C 60480.0  -  62640.0 0.0501  

Power levels listed are maximum peak conducted power. Module is approved as a Limited Single-Modular Transmitter with the following installation/use conditions:

1. It should be installed only on laptop computing devices with a clamshell form factor, i.e., the display lid can be opened and closed. 2. The antenna of the module should be placed inside the lid section with the transmit antenna at a minimal distance of 3.9 cm from the resting surface when the lid is opened at 90 degree angle. 3. The antenna should not be co-located with any other transmit antennas within 20 cm. 4. The use of this module onboard of aircraft as well as in other business/industrial applications listed in 15.255(a) is prohibited. A Class II Permissive Change application is required if any of the above use condition cannot be met.

This application was originally granted on 06/13/2012; grant revised as of 08/15/2013 to reflect changes as noted in the exhibit(s) contained in the Attestation Statements exhibit folder.



TCB Grant - Application rRJCizzaCZ3705QqmBY/7g==

Mail To:
Claire Hoque,
UL CCS
47173 Benicia Street
Fremont, CA 94538
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
 Date of Grant: 08/15/2013

Application Dated: 06/12/2013
Lattice Semiconductor Corporation
111 SW 5th Avenue
Suite 700
Portland, OR 97204
 
Attention: Kirstin Fredrickson , Corporate Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UK2-SIL-SK63100
Name of Grantee:  Lattice Semiconductor Corporation
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: 60GHz WirelessHD Display Mini Card Transmitter
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 60163.0  -  62957.0 0.0661  
15C 60480.0  -  62640.0 0.0447  
15C 60480.0  -  62640.0 0.0501  

Class II Permissive Change to add mobile RF exposure conditions. Power levels listed are maximum peak conducted power. Module is approved as a Limited Single-Modular Transmitter with the following installation/use conditions:

1. Portable RF exposure conditions: the module should be installed only on laptop computing devices with a clamshell form factor, i.e., the display lid can be opened and closed. 2. The antenna of the module should be placed inside the lid section with the transmit antenna at a minimal distance of 3.9 cm from the resting surface when the lid is opened at 90 degree angle. 3. The antenna should not be co-located with any other transmit antennas within 20 cm. 4. The use of this module onboard of aircraft as well as in other business/industrial applications listed in 15.255(a) is prohibited. A Class II Permissive Change application is required if any of the above use condition cannot be met.

2. Mobile RF exposure conditions: the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except as described in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operation of this module is not permitted on aircraft, satellites or in other applications prohibited by 15.255(a)


EAS Grant - Application rRJCizzaCZ3705QqmBY/7g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Lattice Semiconductor Corporation
111 SW 5th Avenue Suite 700
Portland, OR 97204
United States 		  Date of Grant: 08/15/2013

Application Dated: 06/12/2013
 
Attention: Kirstin Fredrickson , Corporate Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UK2-SIL-SK63100
Name of Grantee:  Lattice Semiconductor Corporation
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: 60GHz WirelessHD Display Mini Card Transmitter
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 60163.0  -  62957.0 0.0661  
15C 60480.0  -  62640.0 0.0447  
15C 60480.0  -  62640.0 0.0501  

Class II Permissive Change to add mobile RF exposure conditions. Power levels listed are maximum peak conducted power. Module is approved as a Limited Single-Modular Transmitter with the following installation/use conditions:

1. Portable RF exposure conditions: the module should be installed only on laptop computing devices with a clamshell form factor, i.e., the display lid can be opened and closed. 2. The antenna of the module should be placed inside the lid section with the transmit antenna at a minimal distance of 3.9 cm from the resting surface when the lid is opened at 90 degree angle. 3. The antenna should not be co-located with any other transmit antennas within 20 cm. 4. The use of this module onboard of aircraft as well as in other business/industrial applications listed in 15.255(a) is prohibited. A Class II Permissive Change application is required if any of the above use condition cannot be met.

2. Mobile RF exposure conditions: the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except as described in this filing. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Operation of this module is not permitted on aircraft, satellites or in other applications prohibited by 15.255(a)



Mail To: