FCC ID UKCRF2MODULE

Internal node including all mechanical variants

by Salto Systems S.L

Grantee Code: UKC   Product Code: RF2MODULE
Latest application date: 2018-12-26

FCC ID Device Details

FCC IDUKCRF2MODULE
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeUKC
Product CodeRF2MODULE
Applicant BusinessSalto Systems S.L 🇪🇸
Related Domains saltosystems.com
Equipment ClassInternal node including all mechanical variants
Test FirmDEKRA Testing and Certification, S.A.U.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2405-2480 MHzClass II permissive change or modification of presently authorized equipment2018-12-26
2405-2480 MHzOriginal Equipment2018-05-08

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2019-06-24PDF 790.7 KB
User manual - v1Users Manual2018-11-04PDF 548.6 KB
Internal PhotosInternal Photos2019-06-24PDF 695.9 KB
Photographs - internal - v1Internal Photos2018-11-04PDF 688.3 KB
EXternal PhotosExternal Photos2019-06-24PDF 379.9 KB
Photographs - external - v1External Photos2018-11-04PDF 688.3 KB
LabelID Label/Location Info2018-12-26PDF 449.9 KB
Label design and location - v1ID Label/Location Info2018-05-08PDF 406.1 KB
Test report photosTest Setup Photos2019-06-24PDF 606.8 KB
53898RRF015 Test Setup PhotosTest Setup Photos2018-11-04PDF 861.2 KB
53898RRF024_photographsTest Setup Photos2018-11-04PDF 721 KB
RF Test reportTest Report2018-12-26PDF 1.8 MB
53898RRF015sTest Report2018-05-08PDF 2.2 MB
53898RRF024sTest Report2018-05-08PDF 2.5 MB
Agent letterCover Letter(s)2018-12-26PDF 196.7 KB
Confidentiality RequestCover Letter(s)2018-12-26PDF 424.8 KB
Cover letter C2PCCover Letter(s)2018-12-26PDF 451.3 KB
Modular approval letterCover Letter(s)2018-12-26PDF 138.6 KB
FCC Modular approval letter-UnlicensedCover Letter(s)2018-05-08PDF 138.6 KB
Rf Exposure evaluationRF Exposure Info2018-12-26PDF 529.3 KB
RF exposure evaluation - v2RF Exposure Info2018-05-08PDF 534.8 KB
Block diagram - v2 Metadata onlyBlock DiagramPDF 380.6 KB
Electrical diagrams - v1 Metadata onlySchematicsPDF 735.2 KB
Operational description - v2 Metadata onlyOperational DescriptionPDF 5.2 MB

Application Information

Application IDcBYgPDjiKzoB3c+qZ1S79g==
Final Action Date2018-12-26
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0015447287
ModelRF2MODULE
Frequency Range2405-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionInternal node including all mechanical variants
Responsible PartyBorja Nieto, b.nieto@saltosystems.com , +34 943344550
AgentAlvaro Alvaro Alvaro, DEKRA Testing and Certification, S.A.U., alvaro.corrales@dekra.com , 34925619176
Test FirmRafael Lopez Martin, DEKRA Testing and Certification, S.A.U., rafael.lopez@dekra.com , 34-9562-61 91 00
TCB Emailadmin.rcb.es@dekra.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date06/24/2019
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power is conducted. Limited Single Modular Approval tested in host “RFnet Gateway”. This device is approved for mobile and fixed use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate. Multi-transmitter, supporting simultaneous transmission, configurations have been evaluated as described in this filling. Other multi-transmitter configurations have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f), §15.31(h) and §15.31(k) composite system and §2.1 terms and concepts.

Applications

Application IDDatePurpose
cBYgPDjiKzoB3c+qZ1S79g==2018-12-26Class II permissive change or modification of presently authorized equipment
qFWcgrswwKH/Z4mqS7tuKQ==2018-05-08Original Equipment

Equipment Authorization

FrequencyOutputRules
2405-2480 MHz0.001600015C

Grants

TCB Grant - Application qFWcgrswwKH/Z4mqS7tuKQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  DEKRA Testing and Certification, S.A.U.
Parque Tecnologico de Andalucia, Calle Severo Ochoa 2 y 6
Campanillas - Malaga, 29590
Spain
Date of Grant: 05/08/2018

Application Dated: 05/08/2018
Salto Systems S.L
Pol.Lanbarren, C/Arkotz 9
Oiartzun, 20180
Spain
 
Attention: Borja Nieto

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UKCRF2MODULE
Name of Grantee:  Salto Systems S.L
Equipment Class: Digital Transmission System
Notes: Internal node including all mechanical variants
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2405.0  -  2480.0 0.0016  

Ouput power is conducted

This device meets the SAR Test Exclusion threshold specified in KDB447498 and is authorized for portable and mobile operation.

Single Limited Modular approval limited to the hosts: W0BW / E0102, W0JW / E0102, W09W / E0102, W0BWK / E1215 and W0JWK / E1215

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

Multi-transmitter, supporting simultaneous transmission, configurations have been evaluated as described in this filling. Other multi-transmitter configurations have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f), §15.31(h) and §15.31(k) composite system and §2.1 terms and concepts.


EAS Grant - Application qFWcgrswwKH/Z4mqS7tuKQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Salto Systems S.L
Pol.Lanbarren, C/Arkotz 9
Oiartzun, 20180
Spain
  Date of Grant: 05/08/2018

Application Dated: 05/08/2018
 
Attention: Borja Nieto

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UKCRF2MODULE
Name of Grantee:  Salto Systems S.L
Equipment Class: Digital Transmission System
Notes: Internal node including all mechanical variants
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2405.0  -  2480.0 0.0016  

Ouput power is conducted

This device meets the SAR Test Exclusion threshold specified in KDB447498 and is authorized for portable and mobile operation.

Single Limited Modular approval limited to the hosts: W0BW / E0102, W0JW / E0102, W09W / E0102, W0BWK / E1215 and W0JWK / E1215

Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate. The final product operating with this transmitter must include operating instructions and antenna installation instructions, for end-users and installers to satisfy RF exposure compliance requirements.

Multi-transmitter, supporting simultaneous transmission, configurations have been evaluated as described in this filling. Other multi-transmitter configurations have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f), §15.31(h) and §15.31(k) composite system and §2.1 terms and concepts.



TCB Grant - Application cBYgPDjiKzoB3c+qZ1S79g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  DEKRA Testing and Certification, S.A.U.
Parque Tecnologico de Andalucia, Calle Severo Ochoa 2 y 6
Campanillas - Malaga, 29590
Spain
Date of Grant: 12/26/2018

Application Dated: 12/26/2018
Salto Systems S.L
Pol.Lanbarren, C/Arkotz 9
Oiartzun, 20180
Spain
 
Attention: Borja Nieto

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UKCRF2MODULE
Name of Grantee:  Salto Systems S.L
Equipment Class: Digital Transmission System
Notes: Internal node including all mechanical variants
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2405.0  -  2480.0 0.0016  

Output power is conducted.

Limited Single Modular Approval tested in host “RFnet Gateway”.

This device is approved for mobile and fixed use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate.

Multi-transmitter, supporting simultaneous transmission, configurations have been evaluated as described in this filling. Other multi-transmitter configurations have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f), §15.31(h) and §15.31(k) composite system and §2.1 terms and concepts.


EAS Grant - Application cBYgPDjiKzoB3c+qZ1S79g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Salto Systems S.L
Pol.Lanbarren, C/Arkotz 9
Oiartzun, 20180
Spain
  Date of Grant: 12/26/2018

Application Dated: 12/26/2018
 
Attention: Borja Nieto

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UKCRF2MODULE
Name of Grantee:  Salto Systems S.L
Equipment Class: Digital Transmission System
Notes: Internal node including all mechanical variants
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2405.0  -  2480.0 0.0016  

Output power is conducted.

Limited Single Modular Approval tested in host “RFnet Gateway”.

This device is approved for mobile and fixed use with respect to RF exposure compliance. The antenna of this transmitter must provide a separation distance of at least 20 cm from all persons. Installers and end-users must be provided with operating conditions for satisfying RF exposure compliance. Compliance of this device in all final product configurations is the responsibility of the Grantee. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate.

Multi-transmitter, supporting simultaneous transmission, configurations have been evaluated as described in this filling. Other multi-transmitter configurations have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f), §15.31(h) and §15.31(k) composite system and §2.1 terms and concepts.



Mail To: