FCC ID UKMBGP1031
802.11a/b/g/n/ac+BT 4.1M.2 2230 Type Card Series
by EUROTECH SpA
Grantee Code: UKM Product Code: BGP1031
Latest application date: 2023-05-02
FCC ID Device Details
| FCC ID | UKMBGP1031 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | UKM |
| Product Code | BGP1031 |
| Applicant Business | EUROTECH SpA 🇮🇹 |
| Related Domains |  eurotech.com |
| Equipment Class | 802.11a/b/g/n/ac+BT 4.1M.2 2230 Type Card Series |
| Test Firm | Nemko S.p.A. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-05-02 |
| 2422-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2023-05-02 |
| 5745-5825 MHz | Class II permissive change or modification of presently authorized equipment | 2023-05-02 |
| 2422-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2AE3B-AFX-QCA6174 Grant Date: 01/21/2019 | 2022-12-02 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2AE3B-AFX-QCA6174 Grant Date: 01/21/2019 | 2022-12-02 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2AE3B-AFX-QCA6174 Grant Date: 01/21/2019 | 2022-12-02 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2023-10-28 | PDF 3 MB |
| Internal Photos | Internal Photos | 2023-10-28 | PDF 3.8 MB |
| External Photos | External Photos | 2023-10-28 | PDF 4.7 MB |
| External Photos | External Photos | 2022-12-02 | PDF 1.2 MB |
| Label and Label Location | ID Label/Location Info | 2023-05-02 | PDF 428.4 KB |
| Label and Label Location | ID Label/Location Info | 2022-12-02 | PDF 38.5 KB |
| Test Setup Photos | Test Setup Photos | 2023-10-28 | PDF 576.9 KB |
| Antenna Details | Test Report | 2023-05-02 | PDF 3.5 MB |
| Test Report | Test Report | 2023-05-02 | PDF 3.9 MB |
| Attestation statement | Attestation Statements | 2023-05-02 | PDF 1.1 MB |
| Cover Letters | Cover Letter(s) | 2023-05-02 | PDF 1.1 MB |
| Cover Letters | Cover Letter(s) | 2022-12-02 | PDF 847.8 KB |
| RF Exposure info | RF Exposure Info | 2023-05-02 | PDF 138.9 KB |
| Block Diagram Metadata only | Block Diagram | PDF 290.3 KB | |
| Schematics Metadata only | Schematics | PDF 3.9 MB | |
| Operational Description Metadata only | Operational Description | PDF 158.6 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 571.4 KB |
Application Information
| Application ID | mdFnYkQ5iBtpo1eebi0r9w== |
|---|---|
| Final Action Date | 2023-05-02 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0015452451 |
| Model | BGP1031 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | 802.11a/b/g/n/ac+BT 4.1M.2 2230 Type Card Series |
| Responsible Party | Sergio Spinotti, QA & HSGS Officer, sergio.spinotti@eurotech.com , +390433485486 |
| Test Firm | Roberto Giampaglia, Nemko S.p.A., segreteria@nemko.com  , +39 039 220 12 01 |
| TCB Email | jin.xu@nemko.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 10/28/2023 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to integrate this module into host platform, model no. BTGPU-10-31-02, BTGPU-10-31-04, BTGPU-10-31-05, BTGPU-10-31-22, BTGPU-10-31-24, BTGPU-10-31-25, BTGPU-10-31-32, BTGPU-10-31-34, BTGPU-10-31-35 and antennas as described in this filing. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| mdFnYkQ5iBtpo1eebi0r9w== | 2023-05-02 | Class II permissive change or modification of presently authorized equipment |
| L8I5rAt+2VBmFaheKm17Hw== | 2023-05-02 | Class II permissive change or modification of presently authorized equipment |
| 0YiGBDFO4S1d+u5IxOOghg== | 2023-05-02 | Class II permissive change or modification of presently authorized equipment |
| w/gmVPfJ1Q2+K4656ZqY3Q== | 2022-12-02 | Change in identification of presently authorized equipment. Original FCC ID: 2AE3B-AFX-QCA6174 Grant Date: 01/21/2019 |
| jH7rP20EeC/YdoQnmF5TFw== | 2022-12-02 | Change in identification of presently authorized equipment. Original FCC ID: 2AE3B-AFX-QCA6174 Grant Date: 01/21/2019 |
| Rs7IjQ5pAc7KKd0q1Ev9+w== | 2022-12-02 | Change in identification of presently authorized equipment. Original FCC ID: 2AE3B-AFX-QCA6174 Grant Date: 01/21/2019 |
| Jiqxt3JM+jMPDqoszxoHIQ== | 2022-12-02 | Change in identification of presently authorized equipment. Original FCC ID: 2AE3B-AFX-QCA6174 Grant Date: 01/21/2019 |
Equipment Authorization
Grants
TCB Grant - Application w/gmVPfJ1Q2+K4656ZqY3Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 12/02/2022 Application Dated: 12/02/2022 |
| EUROTECH SpA |
| Via Fratelli Solari, 3/A |
| Amaro, 33020 Italy |
| Attention: Sergio Spinotti , QA & HSGS Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UKMBGP1031 |
| Name of Grantee: | EUROTECH SpA |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n/ac+BT 4.1M.2 2230 Type Card Series |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 15C | 2402.0 - 2480.0 | 0.002 | ||
| MO | 15C | 2412.0 - 2472.0 | 0.51 | ||
| MO | 15C | 2422.0 - 2462.0 | 0.423 |
| Output power listed is maximum combined conducted. This device supports 20 and 40 MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application w/gmVPfJ1Q2+K4656ZqY3Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
EUROTECH SpA Via Fratelli Solari, 3/A Amaro, 33020 Italy |
Date of Grant: 12/02/2022 Application Dated: 12/02/2022 |
| Attention: Sergio Spinotti , QA & HSGS Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UKMBGP1031 |
| Name of Grantee: | EUROTECH SpA |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n/ac+BT 4.1M.2 2230 Type Card Series |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 15C | 2402.0 - 2480.0 | 0.002 | ||
| MO | 15C | 2412.0 - 2472.0 | 0.51 | ||
| MO | 15C | 2422.0 - 2462.0 | 0.423 |
| Output power listed is maximum combined conducted. This device supports 20 and 40 MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 12/02/2022 Application Dated: 12/02/2022 |
| EUROTECH SpA |
| Via Fratelli Solari, 3/A |
| Amaro, 33020 Italy |
| Attention: Sergio Spinotti , QA & HSGS Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UKMBGP1031 |
| Name of Grantee: | EUROTECH SpA |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11a/b/g/n/ac+BT 4.1M.2 2230 Type Card Series |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.015 |
| Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
EAS Grant - Application Rs7IjQ5pAc7KKd0q1Ev9+w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
EUROTECH SpA Via Fratelli Solari, 3/A Amaro, 33020 Italy |
Date of Grant: 12/02/2022 Application Dated: 12/02/2022 |
| Attention: Sergio Spinotti , QA & HSGS Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UKMBGP1031 |
| Name of Grantee: | EUROTECH SpA |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11a/b/g/n/ac+BT 4.1M.2 2230 Type Card Series |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.015 |
| Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 05/02/2023 Application Dated: 05/01/2023 |
| EUROTECH SpA |
| Via Fratelli Solari, 3/A |
| Amaro, 33020 Italy |
| Attention: Sergio Spinotti , QA & HSGS Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UKMBGP1031 |
| Name of Grantee: | EUROTECH SpA |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11a/b/g/n/ac+BT 4.1M.2 2230 Type Card Series |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.015 |
| Class II Permissive Change to integrate this module into host platform, model no. BTGPU-10-31-02, BTGPU-10-31-04, BTGPU-10-31-05, BTGPU-10-31-22, BTGPU-10-31-24, BTGPU-10-31-25, BTGPU-10-31-32, BTGPU-10-31-34, BTGPU-10-31-35 and antennas as described in this filing. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
EAS Grant - Application mdFnYkQ5iBtpo1eebi0r9w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
EUROTECH SpA Via Fratelli Solari, 3/A Amaro, 33020 Italy |
Date of Grant: 05/02/2023 Application Dated: 05/01/2023 |
| Attention: Sergio Spinotti , QA & HSGS Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UKMBGP1031 |
| Name of Grantee: | EUROTECH SpA |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11a/b/g/n/ac+BT 4.1M.2 2230 Type Card Series |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.015 |
| Class II Permissive Change to integrate this module into host platform, model no. BTGPU-10-31-02, BTGPU-10-31-04, BTGPU-10-31-05, BTGPU-10-31-22, BTGPU-10-31-24, BTGPU-10-31-25, BTGPU-10-31-32, BTGPU-10-31-34, BTGPU-10-31-35 and antennas as described in this filing. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 05/02/2023 Application Dated: 05/01/2023 |
| EUROTECH SpA |
| Via Fratelli Solari, 3/A |
| Amaro, 33020 Italy |
| Attention: Sergio Spinotti , QA & HSGS Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UKMBGP1031 |
| Name of Grantee: | EUROTECH SpA |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n/ac+BT 4.1M.2 2230 Type Card Series |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.002 | |||
| MO | 15C | 2412.0 - 2472.0 | 0.51 | ||
| MO | 15C | 2422.0 - 2462.0 | 0.423 |
| Class II Permissive Change to integrate this module into host platform, model no. BTGPU-10- 31-02, BTGPU-10-31-04, BTGPU-10-31-05, BTGPU-10-31-22, BTGPU-10-31-24, BTGPU-10- 31-25, BTGPU-10-31-32, BTGPU-10-31-34, BTGPU-10-31-35 and antennas as described in this filing. Output power listed is maximum combined conducted. This device supports 20 and 40 MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application L8I5rAt+2VBmFaheKm17Hw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
EUROTECH SpA Via Fratelli Solari, 3/A Amaro, 33020 Italy |
Date of Grant: 05/02/2023 Application Dated: 05/01/2023 |
| Attention: Sergio Spinotti , QA & HSGS Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UKMBGP1031 |
| Name of Grantee: | EUROTECH SpA |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n/ac+BT 4.1M.2 2230 Type Card Series |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.002 | |||
| MO | 15C | 2412.0 - 2472.0 | 0.51 | ||
| MO | 15C | 2422.0 - 2462.0 | 0.423 |
| Class II Permissive Change to integrate this module into host platform, model no. BTGPU-10- 31-02, BTGPU-10-31-04, BTGPU-10-31-05, BTGPU-10-31-22, BTGPU-10-31-24, BTGPU-10- 31-25, BTGPU-10-31-32, BTGPU-10-31-34, BTGPU-10-31-35 and antennas as described in this filing. Output power listed is maximum combined conducted. This device supports 20 and 40 MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 12/02/2022 Application Dated: 12/02/2022 |
| EUROTECH SpA |
| Via Fratelli Solari, 3/A |
| Amaro, 33020 Italy |
| Attention: Sergio Spinotti , QA & HSGS Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UKMBGP1031 |
| Name of Grantee: | EUROTECH SpA |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | 802.11a/b/g/n/ac+BT 4.1M.2 2230 Type Card Series |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
EAS Grant - Application Jiqxt3JM+jMPDqoszxoHIQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
EUROTECH SpA Via Fratelli Solari, 3/A Amaro, 33020 Italy |
Date of Grant: 12/02/2022 Application Dated: 12/02/2022 |
| Attention: Sergio Spinotti , QA & HSGS Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UKMBGP1031 |
| Name of Grantee: | EUROTECH SpA |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | 802.11a/b/g/n/ac+BT 4.1M.2 2230 Type Card Series |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 12/02/2022 Application Dated: 12/02/2022 |
| EUROTECH SpA |
| Via Fratelli Solari, 3/A |
| Amaro, 33020 Italy |
| Attention: Sergio Spinotti , QA & HSGS Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UKMBGP1031 |
| Name of Grantee: | EUROTECH SpA |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n/ac+BT 4.1M.2 2230 Type Card Series |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 15E | 5180.0 - 5240.0 | 0.114 | ||
| MO | 15E | 5260.0 - 5320.0 | 0.112 | ||
| MO | 15E | 5500.0 - 5720.0 | 0.104 | ||
| MO | 15E | 5745.0 - 5825.0 | 0.157 |
| Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application jH7rP20EeC/YdoQnmF5TFw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
EUROTECH SpA Via Fratelli Solari, 3/A Amaro, 33020 Italy |
Date of Grant: 12/02/2022 Application Dated: 12/02/2022 |
| Attention: Sergio Spinotti , QA & HSGS Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UKMBGP1031 |
| Name of Grantee: | EUROTECH SpA |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n/ac+BT 4.1M.2 2230 Type Card Series |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 15E | 5180.0 - 5240.0 | 0.114 | ||
| MO | 15E | 5260.0 - 5320.0 | 0.112 | ||
| MO | 15E | 5500.0 - 5720.0 | 0.104 | ||
| MO | 15E | 5745.0 - 5825.0 | 0.157 |
| Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 05/02/2023 Application Dated: 05/01/2023 |
| EUROTECH SpA |
| Via Fratelli Solari, 3/A |
| Amaro, 33020 Italy |
| Attention: Sergio Spinotti , QA & HSGS Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UKMBGP1031 |
| Name of Grantee: | EUROTECH SpA |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n/ac+BT 4.1M.2 2230 Type Card Series |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 15E | 5180.0 - 5240.0 | 0.114 | ||
| MO | 15E | 5260.0 - 5320.0 | 0.112 | ||
| MO | 15E | 5500.0 - 5720.0 | 0.104 | ||
| MO | 15E | 5745.0 - 5825.0 | 0.157 |
| Class II Permissive Change to integrate this module into host platform, model no. BTGPU-10- 31-02, BTGPU-10-31-04, BTGPU-10-31-05, BTGPU-10-31-22, BTGPU-10-31-24, BTGPU-10- 31-25, BTGPU-10-31-32, BTGPU-10-31-34, BTGPU-10-31-35 and antennas as described in this filing. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 0YiGBDFO4S1d+u5IxOOghg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
EUROTECH SpA Via Fratelli Solari, 3/A Amaro, 33020 Italy |
Date of Grant: 05/02/2023 Application Dated: 05/01/2023 |
| Attention: Sergio Spinotti , QA & HSGS Officer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UKMBGP1031 |
| Name of Grantee: | EUROTECH SpA |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n/ac+BT 4.1M.2 2230 Type Card Series |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 15E | 5180.0 - 5240.0 | 0.114 | ||
| MO | 15E | 5260.0 - 5320.0 | 0.112 | ||
| MO | 15E | 5500.0 - 5720.0 | 0.104 | ||
| MO | 15E | 5745.0 - 5825.0 | 0.157 |
| Class II Permissive Change to integrate this module into host platform, model no. BTGPU-10- 31-02, BTGPU-10-31-04, BTGPU-10-31-05, BTGPU-10-31-22, BTGPU-10-31-24, BTGPU-10- 31-25, BTGPU-10-31-32, BTGPU-10-31-34, BTGPU-10-31-35 and antennas as described in this filing. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |