1. FCC ID
  2. UKM
  3. UKMDG1014

FCC ID UKMDG1014

DG1014

by EUROTECH SpA

Grantee Code: UKM   Product Code: DG1014
Latest application date: 2024-01-10

FCC ID Device Details

FCC IDUKMDG1014
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeUKM
Product CodeDG1014
Applicant BusinessEUROTECH SpA 🇮🇹
Related Domains eurotech.com
Equipment ClassDG1014
Test FirmNemko S.p.A.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2024-01-10
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2024-01-10
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2024-01-10
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: RI7WE866C6 Grant Date: 07/20/20202023-09-01
5180-5240 MHzChange in identification of presently authorized equipment. Original FCC ID: RI7WE866C6 Grant Date: 07/20/20202023-09-01
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: RI7WE866C6 Grant Date: 07/20/20202023-09-01

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2024-07-08PDF 4.4 MB
Internal PhotosInternal Photos2024-07-08PDF 599.9 KB
External PhotosExternal Photos2024-07-08PDF 1.6 MB
External PhotosExternal Photos2023-09-01PDF 42.9 KB
Label and Label LocationID Label/Location Info2024-01-10PDF 1.3 MB
Label and Label LocationID Label/Location Info2023-09-01PDF 42.9 KB
Test Setup PhotosTest Setup Photos2024-07-08PDF 687.7 KB
Antenna DetailsTest Report2024-01-10PDF 2.1 MB
Antenna DetailsTest Report2024-01-10PDF 4.4 MB
Antenna detailsTest Report2024-01-10PDF 3.5 MB
Antenna detailsTest Report2024-01-10PDF 4.4 MB
Test ReportTest Report2024-01-10PDF 3.6 MB
Test ReportTest Report2024-01-10PDF 3.4 MB
Attestation StatementAttestation Statements2024-01-10PDF 1.2 MB
Attestation statementAttestation Statements2024-01-10PDF 1.2 MB
Attestation statementAttestation Statements2023-09-01PDF 151.1 KB
Cover LettersCover Letter(s)2024-01-10PDF 1.2 MB
Cover LettersCover Letter(s)2024-01-10PDF 2.2 MB
Cover LettersCover Letter(s)2023-09-01PDF 550.3 KB
RF Exposure infoRF Exposure Info2024-01-10PDF 84 KB
Block Diagram Metadata onlyBlock DiagramPDF 209.7 KB
Schematics Metadata onlySchematicsPDF 1.2 MB
Schematics Metadata onlySchematicsPDF 4.5 MB
Operational Description Metadata onlyOperational DescriptionPDF 193.7 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 437.2 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 270.8 KB

Application Information

Application IDw/lZpYwt8rKB8Gz2jrT2yA==
Final Action Date2024-01-10
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0015452451
ModelDG1014
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionDG1014
Responsible PartySergio Spinotti, QA & HSGS Officer, sergio.spinotti@eurotech.com , +390433485486
Test FirmRoberto Giampaglia, Nemko S.p.A., segreteria@nemko.com , +39 039 220 12 01
TCB Emailjin.xu@nemko.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date07/08/2024
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change to integrate this module into host platform, model no. DYGATE10- 14-03, DYGATE-10-14-04, DYGATE-10-14-05, DYGATE-10-14-07, DYGATE-10-14-09, DYGATE-10-14-23, DYGATE-10-14-24, DYGATE-10-14-25, DYGATE-10-14-27, DYGATE10- 14-29, DYGATE-10-14-33, DYGATE-10-14-34, DYGATE-10-14-35, DYGATE-10-14-37, DYGATE-10-14-39 and antennas as described in this filing. Output power listed is conducted. Single Modular approval. This grant is valid only when the module is sold to OEM integrators. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate. Multi-transmitter configurations, supporting simultaneous transmission, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f) composite system and §2.1 end product terms and concepts.

Applications

Application IDDatePurpose
w/lZpYwt8rKB8Gz2jrT2yA==2024-01-10Class II permissive change or modification of presently authorized equipment
dkzXwb7ggnZTrzuB+R3yFA==2024-01-10Class II permissive change or modification of presently authorized equipment
ainGZvMTfyNSQsg8187y2w==2024-01-10Class II permissive change or modification of presently authorized equipment
7tpk1wHsn4Z3pjMVUJcK1g==2024-01-10Class II permissive change or modification of presently authorized equipment
zUKN+ISTb3vzFrLv6j3+bQ==2023-09-01Change in identification of presently authorized equipment. Original FCC ID: RI7WE866C6 Grant Date: 07/20/2020
vwDY6IsdI5U+hWeGSH4uiA==2023-09-01Change in identification of presently authorized equipment. Original FCC ID: RI7WE866C6 Grant Date: 07/20/2020
C23U5GejHZHSJcU2jKUvAA==2023-09-01Change in identification of presently authorized equipment. Original FCC ID: RI7WE866C6 Grant Date: 07/20/2020
7zgtf+cDnzhhFr0Yl3IHCg==2023-09-01Change in identification of presently authorized equipment. Original FCC ID: RI7WE866C6 Grant Date: 07/20/2020

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.001200015C
2402-2480 MHz0.0004815C
2412-2462 MHz0.0253515C
2412-2462 MHz0.01312215C
2412-2462 MHz0.0197715C
2412-2452 MHz0.0087915C
5190-5230 MHz0.00977215E
5190-5230 MHz0.0104715E
5210 MHz0.00794315E
5260-5320 MHz0.0162215END
5260-5320 MHz0.0158515END
5260-5320 MHz0.0154915END
5270-5310 MHz0.0104715END
5270-5310 MHz0.0097715END
5270-5310 MHz0.00977215END
5290 MHz0.0077615END
5500-5700 MHz0.0199515END
5500-5700 MHz0.0190515END
5500-5700 MHz0.019515END
5510-5670 MHz0.0114815END
5510-5670 MHz0.0120215END
5530-5690 MHz0.0093315END
5745-5825 MHz0.0204215E
5745-5825 MHz0.0190515E
5755-5795 MHz0.0120215E

Grants

TCB Grant - Application zUKN+ISTb3vzFrLv6j3+bQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada 		Date of Grant: 09/01/2023

Application Dated: 08/30/2023
EUROTECH SpA
Via Fratelli Solari, 3/A
Amaro, 33020
Italy
 
Attention: Sergio Spinotti , QA & HSGS Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UKMDG1014
Name of Grantee:  EUROTECH SpA
Equipment Class: Part 15 Class B Digital Device
Notes: DG1014
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15B  - 


EAS Grant - Application zUKN+ISTb3vzFrLv6j3+bQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

EUROTECH SpA
Via Fratelli Solari, 3/A
Amaro, 33020
Italy 		  Date of Grant: 09/01/2023

Application Dated: 08/30/2023
 
Attention: Sergio Spinotti , QA & HSGS Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UKMDG1014
Name of Grantee:  EUROTECH SpA
Equipment Class: Part 15 Class B Digital Device
Notes: DG1014
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15B  - 



TCB Grant - Application w/lZpYwt8rKB8Gz2jrT2yA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada 		Date of Grant: 01/10/2024

Application Dated: 12/13/2023
EUROTECH SpA
Via Fratelli Solari, 3/A
Amaro, 33020
Italy
 
Attention: Sergio Spinotti , QA & HSGS Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UKMDG1014
Name of Grantee:  EUROTECH SpA
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: DG1014
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2402.0  -  2480.0 0.0012  

Class II Permissive Change to integrate this module into host platform, model no. DYGATE10- 14-03, DYGATE-10-14-04, DYGATE-10-14-05, DYGATE-10-14-07, DYGATE-10-14-09, DYGATE-10-14-23, DYGATE-10-14-24, DYGATE-10-14-25, DYGATE-10-14-27, DYGATE10- 14-29, DYGATE-10-14-33, DYGATE-10-14-34, DYGATE-10-14-35, DYGATE-10-14-37, DYGATE-10-14-39 and antennas as described in this filing.

Output power listed is conducted. Single Modular approval. This grant is valid only when the module is sold to OEM integrators.

The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required.

The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.

The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate.

Multi-transmitter configurations, supporting simultaneous transmission, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f) composite system and §2.1 end product terms and concepts.


EAS Grant - Application w/lZpYwt8rKB8Gz2jrT2yA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

EUROTECH SpA
Via Fratelli Solari, 3/A
Amaro, 33020
Italy 		  Date of Grant: 01/10/2024

Application Dated: 12/13/2023
 
Attention: Sergio Spinotti , QA & HSGS Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UKMDG1014
Name of Grantee:  EUROTECH SpA
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: DG1014
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2402.0  -  2480.0 0.0012  

Class II Permissive Change to integrate this module into host platform, model no. DYGATE10- 14-03, DYGATE-10-14-04, DYGATE-10-14-05, DYGATE-10-14-07, DYGATE-10-14-09, DYGATE-10-14-23, DYGATE-10-14-24, DYGATE-10-14-25, DYGATE-10-14-27, DYGATE10- 14-29, DYGATE-10-14-33, DYGATE-10-14-34, DYGATE-10-14-35, DYGATE-10-14-37, DYGATE-10-14-39 and antennas as described in this filing.

Output power listed is conducted. Single Modular approval. This grant is valid only when the module is sold to OEM integrators.

The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required.

The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.

The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate.

Multi-transmitter configurations, supporting simultaneous transmission, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f) composite system and §2.1 end product terms and concepts.



TCB Grant - Application vwDY6IsdI5U+hWeGSH4uiA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada 		Date of Grant: 09/01/2023

Application Dated: 08/30/2023
EUROTECH SpA
Via Fratelli Solari, 3/A
Amaro, 33020
Italy
 
Attention: Sergio Spinotti , QA & HSGS Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UKMDG1014
Name of Grantee:  EUROTECH SpA
Equipment Class: Digital Transmission System
Notes: DG1014
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2402.0  -  2480.0 0.00048  
15C 2412.0  -  2462.0 0.02535  
15C 2412.0  -  2462.0 0.013122  
15C 2412.0  -  2462.0 0.01977  
15C 2412.0  -  2452.0 0.00879  

Output power listed is conducted.

This device has 20 and 40 MHz BW modes. Single Modular approval This grant is valid only when the module is sold to OEM integrators.

The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required.

The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module.

The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.

The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate.

Multi-transmitter configurations, supporting simultaneous transmission, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f) composite system and §2.1 end product terms and concepts.


EAS Grant - Application vwDY6IsdI5U+hWeGSH4uiA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

EUROTECH SpA
Via Fratelli Solari, 3/A
Amaro, 33020
Italy 		  Date of Grant: 09/01/2023

Application Dated: 08/30/2023
 
Attention: Sergio Spinotti , QA & HSGS Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UKMDG1014
Name of Grantee:  EUROTECH SpA
Equipment Class: Digital Transmission System
Notes: DG1014
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2402.0  -  2480.0 0.00048  
15C 2412.0  -  2462.0 0.02535  
15C 2412.0  -  2462.0 0.013122  
15C 2412.0  -  2462.0 0.01977  
15C 2412.0  -  2452.0 0.00879  

Output power listed is conducted.

This device has 20 and 40 MHz BW modes. Single Modular approval This grant is valid only when the module is sold to OEM integrators.

The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required.

The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module.

The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.

The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate.

Multi-transmitter configurations, supporting simultaneous transmission, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f) composite system and §2.1 end product terms and concepts.



TCB Grant - Application dkzXwb7ggnZTrzuB+R3yFA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada 		Date of Grant: 01/10/2024

Application Dated: 12/13/2023
EUROTECH SpA
Via Fratelli Solari, 3/A
Amaro, 33020
Italy
 
Attention: Sergio Spinotti , QA & HSGS Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UKMDG1014
Name of Grantee:  EUROTECH SpA
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: DG1014
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15E 5180.0  -  5240.0 0.01549  
15E 5180.0  -  5240.0 0.01479  
15E 5190.0  -  5230.0 0.009772  
15E 5190.0  -  5230.0 0.01047  
15E 5210.0  -  5210.0 0.007943  
ND 15E 5260.0  -  5320.0 0.01622  
ND 15E 5260.0  -  5320.0 0.01585  
ND 15E 5270.0  -  5310.0 0.009772  
ND 15E 5260.0  -  5320.0 0.01549  
ND 15E 5270.0  -  5310.0 0.01047  
ND 15E 5290.0  -  5290.0 0.00776  
ND 15E 5500.0  -  5700.0 0.01995  
ND 15E 5500.0  -  5700.0 0.01905  
ND 15E 5510.0  -  5670.0 0.01148  
ND 15E 5500.0  -  5700.0 0.0195  
ND 15E 5510.0  -  5670.0 0.01202  
ND 15E 5530.0  -  5690.0 0.00933  
15E 5745.0  -  5825.0 0.02042  
15E 5745.0  -  5825.0 0.01905  
15E 5755.0  -  5795.0 0.01202  

Class II Permissive Change to integrate this module into host platform, model no. DYGATE10- 14-03, DYGATE-10-14-04, DYGATE-10-14-05, DYGATE-10-14-07, DYGATE-10-14-09, DYGATE-10-14-23, DYGATE-10-14-24, DYGATE-10-14-25, DYGATE-10-14-27, DYGATE10- 14-29, DYGATE-10-14-33, DYGATE-10-14-34, DYGATE-10-14-35, DYGATE-10-14-37, DYGATE-10-14-39 and antennas as described in this filing.

Output power listed is conducted. This device has 20, 40, and 80 MHz BW modes.

Single Modular approval This grant is valid only when the module is sold to OEM integrators. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required.

The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module.

The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.

The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate.

Multi-transmitter configurations, supporting simultaneous transmission, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f) composite system and §2.1 end product terms and concepts.


ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application dkzXwb7ggnZTrzuB+R3yFA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

EUROTECH SpA
Via Fratelli Solari, 3/A
Amaro, 33020
Italy 		  Date of Grant: 01/10/2024

Application Dated: 12/13/2023
 
Attention: Sergio Spinotti , QA & HSGS Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UKMDG1014
Name of Grantee:  EUROTECH SpA
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: DG1014
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15E 5180.0  -  5240.0 0.01549  
15E 5180.0  -  5240.0 0.01479  
15E 5190.0  -  5230.0 0.009772  
15E 5190.0  -  5230.0 0.01047  
15E 5210.0  -  5210.0 0.007943  
ND 15E 5260.0  -  5320.0 0.01622  
ND 15E 5260.0  -  5320.0 0.01585  
ND 15E 5270.0  -  5310.0 0.009772  
ND 15E 5260.0  -  5320.0 0.01549  
ND 15E 5270.0  -  5310.0 0.01047  
ND 15E 5290.0  -  5290.0 0.00776  
ND 15E 5500.0  -  5700.0 0.01995  
ND 15E 5500.0  -  5700.0 0.01905  
ND 15E 5510.0  -  5670.0 0.01148  
ND 15E 5500.0  -  5700.0 0.0195  
ND 15E 5510.0  -  5670.0 0.01202  
ND 15E 5530.0  -  5690.0 0.00933  
15E 5745.0  -  5825.0 0.02042  
15E 5745.0  -  5825.0 0.01905  
15E 5755.0  -  5795.0 0.01202  

Class II Permissive Change to integrate this module into host platform, model no. DYGATE10- 14-03, DYGATE-10-14-04, DYGATE-10-14-05, DYGATE-10-14-07, DYGATE-10-14-09, DYGATE-10-14-23, DYGATE-10-14-24, DYGATE-10-14-25, DYGATE-10-14-27, DYGATE10- 14-29, DYGATE-10-14-33, DYGATE-10-14-34, DYGATE-10-14-35, DYGATE-10-14-37, DYGATE-10-14-39 and antennas as described in this filing.

Output power listed is conducted. This device has 20, 40, and 80 MHz BW modes.

Single Modular approval This grant is valid only when the module is sold to OEM integrators. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required.

The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module.

The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.

The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate.

Multi-transmitter configurations, supporting simultaneous transmission, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f) composite system and §2.1 end product terms and concepts.


ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application C23U5GejHZHSJcU2jKUvAA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada 		Date of Grant: 09/01/2023

Application Dated: 08/30/2023
EUROTECH SpA
Via Fratelli Solari, 3/A
Amaro, 33020
Italy
 
Attention: Sergio Spinotti , QA & HSGS Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UKMDG1014
Name of Grantee:  EUROTECH SpA
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: DG1014
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15E 5180.0  -  5240.0 0.01549  
15E 5180.0  -  5240.0 0.01479  
15E 5190.0  -  5230.0 0.009772  
15E 5190.0  -  5230.0 0.01047  
15E 5210.0  -  5210.0 0.007943  
ND 15E 5260.0  -  5320.0 0.01622  
ND 15E 5260.0  -  5320.0 0.01585  
ND 15E 5270.0  -  5310.0 0.00977  
ND 15E 5260.0  -  5320.0 0.01549  
ND 15E 5270.0  -  5310.0 0.01047  
ND 15E 5290.0  -  5290.0 0.00776  
ND 15E 5500.0  -  5700.0 0.01995  
ND 15E 5500.0  -  5700.0 0.01905  
ND 15E 5510.0  -  5670.0 0.01148  
ND 15E 5500.0  -  5700.0 0.0195  
ND 15E 5510.0  -  5670.0 0.01202  
ND 15E 5530.0  -  5690.0 0.00933  
15E 5745.0  -  5825.0 0.02042  
15E 5745.0  -  5825.0 0.01905  
15E 5755.0  -  5795.0 0.01202  

Output power listed is conducted.

This device has 20, 40, and 80 MHz BW modes.

Single Modular approval This grant is valid only when the module is sold to OEM integrators. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required.

The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module.

The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.

The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate.

Multi-transmitter configurations, supporting simultaneous transmission, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f) composite system and §2.1 end product terms and concepts.


ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application C23U5GejHZHSJcU2jKUvAA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

EUROTECH SpA
Via Fratelli Solari, 3/A
Amaro, 33020
Italy 		  Date of Grant: 09/01/2023

Application Dated: 08/30/2023
 
Attention: Sergio Spinotti , QA & HSGS Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UKMDG1014
Name of Grantee:  EUROTECH SpA
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: DG1014
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15E 5180.0  -  5240.0 0.01549  
15E 5180.0  -  5240.0 0.01479  
15E 5190.0  -  5230.0 0.009772  
15E 5190.0  -  5230.0 0.01047  
15E 5210.0  -  5210.0 0.007943  
ND 15E 5260.0  -  5320.0 0.01622  
ND 15E 5260.0  -  5320.0 0.01585  
ND 15E 5270.0  -  5310.0 0.00977  
ND 15E 5260.0  -  5320.0 0.01549  
ND 15E 5270.0  -  5310.0 0.01047  
ND 15E 5290.0  -  5290.0 0.00776  
ND 15E 5500.0  -  5700.0 0.01995  
ND 15E 5500.0  -  5700.0 0.01905  
ND 15E 5510.0  -  5670.0 0.01148  
ND 15E 5500.0  -  5700.0 0.0195  
ND 15E 5510.0  -  5670.0 0.01202  
ND 15E 5530.0  -  5690.0 0.00933  
15E 5745.0  -  5825.0 0.02042  
15E 5745.0  -  5825.0 0.01905  
15E 5755.0  -  5795.0 0.01202  

Output power listed is conducted.

This device has 20, 40, and 80 MHz BW modes.

Single Modular approval This grant is valid only when the module is sold to OEM integrators. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required.

The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module.

The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.

The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate.

Multi-transmitter configurations, supporting simultaneous transmission, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f) composite system and §2.1 end product terms and concepts.


ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application ainGZvMTfyNSQsg8187y2w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada 		Date of Grant: 01/10/2024

Application Dated: 12/12/2023
EUROTECH SpA
Via Fratelli Solari, 3/A
Amaro, 33020
Italy
 
Attention: Sergio Spinotti , QA & HSGS Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UKMDG1014
Name of Grantee:  EUROTECH SpA
Equipment Class: Part 15 Class B Digital Device
Notes: DG1014
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15B  - 

Class II Permissive Change to integrate this module into host platform, model no. DYGATE-10-14-03, DYGATE-10-14-04, DYGATE-10-14-05, DYGATE-10-14-07, DYGATE-10-14-09, DYGATE-10-14-23, DYGATE-10-14-24, DYGATE-10-14-25, DYGATE-10-14-27, DYGATE-10-14-29, DYGATE-10-14-33, DYGATE-10-14-34, DYGATE-10-14-35, DYGATE-10-14-37, DYGATE-10-14-39 and antennas as described in this filing.

EAS Grant - Application ainGZvMTfyNSQsg8187y2w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

EUROTECH SpA
Via Fratelli Solari, 3/A
Amaro, 33020
Italy 		  Date of Grant: 01/10/2024

Application Dated: 12/12/2023
 
Attention: Sergio Spinotti , QA & HSGS Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UKMDG1014
Name of Grantee:  EUROTECH SpA
Equipment Class: Part 15 Class B Digital Device
Notes: DG1014
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15B  - 

Class II Permissive Change to integrate this module into host platform, model no. DYGATE-10-14-03, DYGATE-10-14-04, DYGATE-10-14-05, DYGATE-10-14-07, DYGATE-10-14-09, DYGATE-10-14-23, DYGATE-10-14-24, DYGATE-10-14-25, DYGATE-10-14-27, DYGATE-10-14-29, DYGATE-10-14-33, DYGATE-10-14-34, DYGATE-10-14-35, DYGATE-10-14-37, DYGATE-10-14-39 and antennas as described in this filing.



TCB Grant - Application 7zgtf+cDnzhhFr0Yl3IHCg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada 		Date of Grant: 09/01/2023

Application Dated: 08/30/2023
EUROTECH SpA
Via Fratelli Solari, 3/A
Amaro, 33020
Italy
 
Attention: Sergio Spinotti , QA & HSGS Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UKMDG1014
Name of Grantee:  EUROTECH SpA
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: DG1014
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2402.0  -  2480.0 0.0012  

Output power listed is conducted.

Single Modular approval.

This grant is valid only when the module is sold to OEM integrators.

The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required.

The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.

The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate.

Multi-transmitter configurations, supporting simultaneous transmission, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f) composite system and §2.1 end product terms and concepts.


EAS Grant - Application 7zgtf+cDnzhhFr0Yl3IHCg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

EUROTECH SpA
Via Fratelli Solari, 3/A
Amaro, 33020
Italy 		  Date of Grant: 09/01/2023

Application Dated: 08/30/2023
 
Attention: Sergio Spinotti , QA & HSGS Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UKMDG1014
Name of Grantee:  EUROTECH SpA
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: DG1014
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2402.0  -  2480.0 0.0012  

Output power listed is conducted.

Single Modular approval.

This grant is valid only when the module is sold to OEM integrators.

The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required.

The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.

The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate.

Multi-transmitter configurations, supporting simultaneous transmission, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f) composite system and §2.1 end product terms and concepts.



TCB Grant - Application 7tpk1wHsn4Z3pjMVUJcK1g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada 		Date of Grant: 01/10/2024

Application Dated: 12/13/2023
EUROTECH SpA
Via Fratelli Solari, 3/A
Amaro, 33020
Italy
 
Attention: Sergio Spinotti , QA & HSGS Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UKMDG1014
Name of Grantee:  EUROTECH SpA
Equipment Class: Digital Transmission System
Notes: DG1014
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2402.0  -  2480.0 0.00048  
15C 2412.0  -  2462.0 0.02535  
15C 2412.0  -  2462.0 0.013122  
15C 2412.0  -  2462.0 0.01977  
15C 2412.0  -  2452.0 0.00879  

Class II Permissive Change to integrate this module into host platform, model no. DYGATE10- 14-03, DYGATE-10-14-04, DYGATE-10-14-05, DYGATE-10-14-07, DYGATE-10-14-09, DYGATE-10-14-23, DYGATE-10-14-24, DYGATE-10-14-25, DYGATE-10-14-27, DYGATE10- 14-29, DYGATE-10-14-33, DYGATE-10-14-34, DYGATE-10-14-35, DYGATE-10-14-37, DYGATE-10-14-39 and antennas as described in this filing.

This device has 20 and 40 MHz BW modes. Single Modular approval This grant is valid only when the module is sold to OEM integrators.

The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required.

The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module.

The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.

The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate.

Multi-transmitter configurations, supporting simultaneous transmission, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f) composite system and §2.1 end product terms and concepts.


EAS Grant - Application 7tpk1wHsn4Z3pjMVUJcK1g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

EUROTECH SpA
Via Fratelli Solari, 3/A
Amaro, 33020
Italy 		  Date of Grant: 01/10/2024

Application Dated: 12/13/2023
 
Attention: Sergio Spinotti , QA & HSGS Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UKMDG1014
Name of Grantee:  EUROTECH SpA
Equipment Class: Digital Transmission System
Notes: DG1014
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2402.0  -  2480.0 0.00048  
15C 2412.0  -  2462.0 0.02535  
15C 2412.0  -  2462.0 0.013122  
15C 2412.0  -  2462.0 0.01977  
15C 2412.0  -  2452.0 0.00879  

Class II Permissive Change to integrate this module into host platform, model no. DYGATE10- 14-03, DYGATE-10-14-04, DYGATE-10-14-05, DYGATE-10-14-07, DYGATE-10-14-09, DYGATE-10-14-23, DYGATE-10-14-24, DYGATE-10-14-25, DYGATE-10-14-27, DYGATE10- 14-29, DYGATE-10-14-33, DYGATE-10-14-34, DYGATE-10-14-35, DYGATE-10-14-37, DYGATE-10-14-39 and antennas as described in this filing.

This device has 20 and 40 MHz BW modes. Single Modular approval This grant is valid only when the module is sold to OEM integrators.

The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required.

The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module.

The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.

The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

Installation of this device into specific final products may require the submission of a Class II permissive change application containing data pertinent to RF Exposure, emissions and host/module authentication, or new application if appropriate.

Multi-transmitter configurations, supporting simultaneous transmission, have not been evaluated and shall be evaluated according to KDB Publication 447498 and §2.947(f) composite system and §2.1 end product terms and concepts.



Mail To: