FCC ID UMN-PSR-1400

Perimeter Surveillance Radar

by Amphitech Systems

Grantee Code: UMN   Product Code: PSR1400
Latest application date: 2008-02-07

FCC ID Device Details

FCC IDUMN-PSR-1400
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeUMN
Product CodePSR1400
Applicant BusinessAmphitech Systems 🇨🇦
Related Domains icxt.com
Equipment ClassPerimeter Surveillance Radar
Test FirmNemko Canada Inc

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
34650-35350 MHzClass II permissive change or modification of presently authorized equipment2008-02-07
34650-35350 MHzOriginal Equipment2007-01-12

Exhibits

DocumentTypeAvailableFile
External PhotosExternal Photos2007-01-12PDF 52.6 KB
Label and Label LocationID Label/Location Info2007-01-12PDF 70.7 KB
Test Setup PhotoTest Setup Photos2007-01-12PDF 39.2 KB
test reportTest Report2008-02-07PDF 117.9 KB
Test ReportTest Report2007-01-12PDF 407.6 KB
changes letterCover Letter(s)2008-02-07PDF 488 KB
confidential letterCover Letter(s)2008-02-07PDF 210.4 KB
Confidential LetterCover Letter(s)2007-01-12PDF 487.7 KB
Request for changeCover Letter(s)2007-01-12PDF 177.6 KB
RF ExposureRF Exposure Info2007-01-12PDF 26.1 KB
Tune Up ProcedureParts List/Tune Up Info2007-01-12PDF 10.5 KB

Application Information

Application IDG2qbug6NArKb4mJb9kmblg==
Final Action Date2008-02-07
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0015516792
Model-PSR-1400
Frequency Range34650-35350 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionPerimeter Surveillance Radar
Responsible PartyShoshana Goldberg, Project Manager, Shoshana.goldberg@icxt.com , 450-663-4554
Technical ContactYves Lamontagne, Amphitech Systems, ylamontagne@amphitech.com , 450 663 4554
Test FirmStuart Beck, Nemko Canada Inc, stuart.beck@nemko.com , 6137379680
TCB Emailstuart.beck@nemko.com
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. This equipment is used in fixed or mobile applications. Fixed grant note conditions: The antenna used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3). Mobile grant note conditions: The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The antenna is located inside a structural, weatherproof enclosure that is designed to provide 20 cm separation distance between the outside of the enclosure to the center of the radiating element. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
G2qbug6NArKb4mJb9kmblg==2008-02-07Class II permissive change or modification of presently authorized equipment
ucyrFktdzYFV/M2b+8HKOg==2007-01-12Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
34650-35350 MHz0.4000000996.0000000000ppmN0N90

Grants

TCB Grant - Application ucyrFktdzYFV/M2b+8HKOg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko Canada Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 01/12/2007

Application Dated: 01/12/2007
Amphitech Systems
3440 Francis_Hughes
Suite 120
Laval, H7L 5A9
Canada
 
Attention: Shoshana Goldberg , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UMN-PSR-1400
Name of Grantee:  Amphitech Systems
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Perimeter Surveillance Radar
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 34650.0  -  35350.0 0.4 996.0  PM N0N

Power listed is conducted. This equipment is used in fixed or mobile applications. Fixed grant note conditions: The antenna used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3). Mobile grant note conditions: The antenna used for this transmitter must be installed to provide a separation distance of at least 1.1 m from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application ucyrFktdzYFV/M2b+8HKOg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Amphitech Systems
3440 Francis_Hughes Suite 120
Laval, H7L 5A9
Canada
  Date of Grant: 01/12/2007

Application Dated: 01/12/2007
 
Attention: Shoshana Goldberg , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UMN-PSR-1400
Name of Grantee:  Amphitech Systems
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Perimeter Surveillance Radar
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 34650.0  -  35350.0 0.4 996.0  PM N0N

Power listed is conducted. This equipment is used in fixed or mobile applications. Fixed grant note conditions: The antenna used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3). Mobile grant note conditions: The antenna used for this transmitter must be installed to provide a separation distance of at least 1.1 m from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To:


EA767090

TCB Grant - Application G2qbug6NArKb4mJb9kmblg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko Canada Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 02/07/2008

Application Dated: 02/06/2008
Amphitech Systems
3440 Francis_Hughes
Suite 120
Laval, H7L 5A9
Canada
 
Attention: Shoshana Goldberg , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UMN-PSR-1400
Name of Grantee:  Amphitech Systems
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Perimeter Surveillance Radar
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 34650.0  -  35350.0 0.4 996.0  PM N0N

Power listed is conducted. This equipment is used in fixed or mobile applications. Fixed grant note conditions: The antenna used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3). Mobile grant note conditions: The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The antenna is located inside a structural, weatherproof enclosure that is designed to provide 20 cm separation distance between the outside of the enclosure to the center of the radiating element. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application G2qbug6NArKb4mJb9kmblg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Amphitech Systems
3440 Francis_Hughes Suite 120
Laval, H7L 5A9
Canada
  Date of Grant: 02/07/2008

Application Dated: 02/06/2008
 
Attention: Shoshana Goldberg , Project Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UMN-PSR-1400
Name of Grantee:  Amphitech Systems
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Perimeter Surveillance Radar
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90 34650.0  -  35350.0 0.4 996.0  PM N0N

Power listed is conducted. This equipment is used in fixed or mobile applications. Fixed grant note conditions: The antenna used for this transmitter must be fixed-mounted on outdoor permanent structures. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-location requirements of 1.1307(b)(3). Mobile grant note conditions: The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The antenna is located inside a structural, weatherproof enclosure that is designed to provide 20 cm separation distance between the outside of the enclosure to the center of the radiating element. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: