FCC ID UN6-ZB0929
Vibration Wireless Gateway ZB0929
by ifm electronic gmbh
Grantee Code: UN6 Product Code: ZB0929
Latest application date: 2020-07-15
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2AR86GW11 Grant Date: 08/05/2019 | 2020-07-15 |
| 824-849 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2AR86GW11 Grant Date: 08/05/2019 | 2020-07-15 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual english | Users Manual | 2020-07-15 | PDF 165.5 KB |
| External Photos | External Photos | 2020-07-15 | PDF 481.1 KB |
| Label | ID Label/Location Info | 2020-07-15 | PDF 427.1 KB |
| Authorization original grantee | Cover Letter(s) | 2020-07-15 | PDF 122.8 KB |
| Change in ID Request Letter | Cover Letter(s) | 2020-07-15 | PDF 362.1 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2020-07-15 | PDF 316.8 KB |
| Declaration of identically | Cover Letter(s) | 2020-07-15 | PDF 110.4 KB |
Application Information
| Application ID | lnJXu8V1XLq1T79+pbGhBQ== |
|---|---|
| Final Action Date | 2020-07-15 |
| Application Purpose | Change in identification of presently authorized equipment. Original FCC ID: 2AR86GW11 Grant Date: 08/05/2019 |
| Applicant FRN | 0015558760 |
| Model | ZB0929 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Vibration Wireless Gateway ZB0929 |
| Responsible Party | Christoph Ehrhart, manager of standards and approvals, christoph.ehrhart@ifm.com  , +49 (0) 7542 518 |
| Test Firm | Gerald Schmidt, CTC advanced GmbH, mail@ctcadvanced.com  , 49-681-598-0 |
| TCB Email | TCB@ctcadvanced.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is peak conducted. This device supports a 20 MHz and 40 MHz bandwidth mode. The Antenna installation and operating configurations of this transmitter, including antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of§2.1091. The antenna used for this transmitter must be installed to provide a separation distance of at least 0.2m from all Persons. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| lnJXu8V1XLq1T79+pbGhBQ== | 2020-07-15 | Change in identification of presently authorized equipment. Original FCC ID: 2AR86GW11 Grant Date: 08/05/2019 |
| BUmiXHjmVCGLaav/E20Alw== | 2020-07-15 | Change in identification of presently authorized equipment. Original FCC ID: 2AR86GW11 Grant Date: 08/05/2019 |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules |
|---|---|---|---|---|
| 824-849 MHz | 0.055 | 2.5ppm | 1M10G7D | 22H |
| 824-849 MHz | 0.0468 | 1.8ppm | 1M11W7D | 22H |
| 824-849 MHz | 0.1148 | 1.8ppm | 187KG7D | 22H |
| 824.2-848.8 MHz | 0.537 | 2.5ppm | 245KG7W | 22H |
| 1710-1755 MHz | 0.3236 | 1.8ppm | 1M01G7D | 27 |
| 1710-1755 MHz | 0.302 | 1.8ppm | 1M11W7D | 27 |
| 1710-1755 MHz | 0.3891 | 1.8ppm | 187KG7D | 27 |
| 1850-1910 MHz | 0.537 | 1.8ppm | 189KG7D | 24E |
| 1850-1910 MHz | 0.4074 | 1.8ppm | 1M11G7D | 24E |
| 1850-1910 MHz | 0.3981 | 1.8ppm | 1M11W7D | 24E |
| 1850.2-1909.8 MHz | 1.9498 | 1.8ppm | 244KGXW | 24E |
| 1850.2-1909.8 MHz | 1 | 1.8ppm | 244KG7W | 24E |
| 2402-2480 MHz | 0.0027 | 15C | ||
| 2412-2462 MHz | 0.0513 | 15C | ||
| 2422-2452 MHz | 0.0525 | 15C |
Grants
TCB Grant - Application lnJXu8V1XLq1T79+pbGhBQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CTC advanced GmbH Untertuerkheimer Strasse 6-10 66117 Saarbruecken, Germany |
Date of Grant: 07/15/2020 Application Dated: 07/15/2020 |
| ifm electronic gmbh |
| ifm electronic gmbh |
| Essen, 45128 Germany |
| Attention: Christoph Ehrhart , manager of standards and approvals |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UN6-ZB0929 |
| Name of Grantee: | ifm electronic gmbh |
| Equipment Class: | Digital Transmission System |
| Notes: | Vibration Wireless Gateway ZB0929 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0027 | |||
| 15C | 2412.0 - 2462.0 | 0.0513 | |||
| 15C | 2422.0 - 2452.0 | 0.0525 |
| Output power listed is peak conducted. This device supports a 20 MHz and 40 MHz bandwidth mode. The Antenna installation and operating configurations of this transmitter, including antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of§2.1091. The antenna used for this transmitter must be installed to provide a separation distance of at least 0.2m from all Persons. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application lnJXu8V1XLq1T79+pbGhBQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ifm electronic gmbh ifm electronic gmbh Essen, 45128 Germany |
Date of Grant: 07/15/2020 Application Dated: 07/15/2020 |
| Attention: Christoph Ehrhart , manager of standards and approvals |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UN6-ZB0929 |
| Name of Grantee: | ifm electronic gmbh |
| Equipment Class: | Digital Transmission System |
| Notes: | Vibration Wireless Gateway ZB0929 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0027 | |||
| 15C | 2412.0 - 2462.0 | 0.0513 | |||
| 15C | 2422.0 - 2452.0 | 0.0525 |
| Output power listed is peak conducted. This device supports a 20 MHz and 40 MHz bandwidth mode. The Antenna installation and operating configurations of this transmitter, including antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of§2.1091. The antenna used for this transmitter must be installed to provide a separation distance of at least 0.2m from all Persons. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CTC advanced GmbH Untertuerkheimer Strasse 6-10 66117 Saarbruecken, Germany |
Date of Grant: 07/15/2020 Application Dated: 07/15/2020 |
| ifm electronic gmbh |
| ifm electronic gmbh |
| Essen, 45128 Germany |
| Attention: Christoph Ehrhart , manager of standards and approvals |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UN6-ZB0929 |
| Name of Grantee: | ifm electronic gmbh |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Vibration Wireless Gateway ZB0929 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 0.8913 | 2.5 PM | 244KGXW | |
| 22H | 824.2 - 848.8 | 0.537 | 2.5 PM | 245KG7W | |
| 22H | 824.0 - 849.0 | 0.055 | 2.5 PM | 1M10G7D | |
| 22H | 824.0 - 849.0 | 0.0468 | 1.8 PM | 1M11W7D | |
| 22H | 824.0 - 849.0 | 0.1148 | 1.8 PM | 187KG7D | |
| 24E | 1850.2 - 1909.8 | 1.9498 | 1.8 PM | 244KGXW | |
| 24E | 1850.2 - 1909.8 | 1.0 | 1.8 PM | 244KG7W | |
| 24E | 1850.0 - 1910.0 | 0.4074 | 1.8 PM | 1M11G7D | |
| 24E | 1850.0 - 1910.0 | 0.3981 | 1.8 PM | 1M11W7D | |
| 24E | 1850.0 - 1910.0 | 0.537 | 1.8 PM | 189KG7D | |
| 27 | 1710.0 - 1755.0 | 0.3236 | 1.8 PM | 1M01G7D | |
| 27 | 1710.0 - 1755.0 | 0.302 | 1.8 PM | 1M11W7D | |
| 27 | 1710.0 - 1755.0 | 0.3891 | 1.8 PM | 187KG7D |
| Output power listed is ERP for frequencies below 1 GHz, EIRP for frequencies above 1 GHz. This device supports LTE modes Cat M1 and NB-IoT at LTE band 2, 4 and 5. The Antenna installation and operating configurations of this transmitter, including antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of§2.1091. The antenna used for this transmitter must be installed to provide a separation distance of at least 0.2m from all ersons. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application BUmiXHjmVCGLaav/E20Alw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ifm electronic gmbh ifm electronic gmbh Essen, 45128 Germany |
Date of Grant: 07/15/2020 Application Dated: 07/15/2020 |
| Attention: Christoph Ehrhart , manager of standards and approvals |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UN6-ZB0929 |
| Name of Grantee: | ifm electronic gmbh |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Vibration Wireless Gateway ZB0929 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 0.8913 | 2.5 PM | 244KGXW | |
| 22H | 824.2 - 848.8 | 0.537 | 2.5 PM | 245KG7W | |
| 22H | 824.0 - 849.0 | 0.055 | 2.5 PM | 1M10G7D | |
| 22H | 824.0 - 849.0 | 0.0468 | 1.8 PM | 1M11W7D | |
| 22H | 824.0 - 849.0 | 0.1148 | 1.8 PM | 187KG7D | |
| 24E | 1850.2 - 1909.8 | 1.9498 | 1.8 PM | 244KGXW | |
| 24E | 1850.2 - 1909.8 | 1.0 | 1.8 PM | 244KG7W | |
| 24E | 1850.0 - 1910.0 | 0.4074 | 1.8 PM | 1M11G7D | |
| 24E | 1850.0 - 1910.0 | 0.3981 | 1.8 PM | 1M11W7D | |
| 24E | 1850.0 - 1910.0 | 0.537 | 1.8 PM | 189KG7D | |
| 27 | 1710.0 - 1755.0 | 0.3236 | 1.8 PM | 1M01G7D | |
| 27 | 1710.0 - 1755.0 | 0.302 | 1.8 PM | 1M11W7D | |
| 27 | 1710.0 - 1755.0 | 0.3891 | 1.8 PM | 187KG7D |
| Output power listed is ERP for frequencies below 1 GHz, EIRP for frequencies above 1 GHz. This device supports LTE modes Cat M1 and NB-IoT at LTE band 2, 4 and 5. The Antenna installation and operating configurations of this transmitter, including antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of§2.1091. The antenna used for this transmitter must be installed to provide a separation distance of at least 0.2m from all ersons. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |