FCC ID UO3UN1DK-D
BATTERY POWERED EVENT RECORDER PLACED ON THE VEHICLE WINDSHIELD WITH WiFi MODULE
by Lytx, Inc.
Grantee Code: UO3 Product Code: UN1DKD
Latest application date: 2019-05-20
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5745-5825 MHz | Original Equipment | 2019-05-20 |
| 2412-2462 MHz | Original Equipment | 2019-05-20 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Lytx SF-Series Installation Guide (North America Edition)-2019-Apr-01 | Users Manual | 2019-08-01 | PDF 4.8 MB |
| DC-6000-030 Interior pictures V1.1 | Internal Photos | 2019-08-01 | PDF 919.7 KB |
| Exterior Pictures | External Photos | 2019-08-01 | PDF 338.2 KB |
| 150-00119-000 Label Certification, ER-SF300, Wi-Fi Only, Rev A | ID Label/Location Info | 2019-05-20 | PDF 341.1 KB |
| DC-6000-030 Rear cover with label v1.0 | ID Label/Location Info | 2019-05-20 | PDF 328.7 KB |
| 12518840-E1V5 FCCIC Report DTS WLAN_Test Setup Photos | Test Setup Photos | 2019-08-01 | PDF 395.7 KB |
| 12518840-E2V6 FCC Report UNII WLAN_Setup Photos Metadata only | Test Setup Photos | 2019-08-01 | PDF 355.3 KB |
| 12518840-E2V6 FCCIC Report UNII WLAN_Test Setup Photos Metadata only | Test Setup Photos | 2019-08-01 | PDF 354 KB |
| 12518840-E2V7 FCCIC Report UNII WLAN_Setup Photos | Test Setup Photos | 2019-08-01 | PDF 355.3 KB |
| 12518840-E1V5 FCCIC Report DTS WLAN_Test Report | Test Report | 2019-05-20 | PDF 5.2 MB |
| 12518840-E2V6 FCC Report UNII WLAN_No Photos_Part1 Metadata only | Test Report | 2019-05-20 | PDF 4.9 MB |
| 12518840-E2V6 FCC Report UNII WLAN_No Photos_Part2 Metadata only | Test Report | 2019-05-20 | PDF 4.8 MB |
| 12518840-E2V6 FCCIC Report UNII WLAN_Test Report Metadata only | Test Report | 2019-05-20 | PDF 4.9 MB |
| 12518840-E2V7 FCCIC Report UNII WLAN_No Photos_Part1 | Test Report | 2019-05-20 | PDF 3.9 MB |
| 12518840-E2V7 FCCIC Report UNII WLAN_No Photos_Part2 | Test Report | 2019-05-20 | PDF 2.3 MB |
| Professional installation attestation - Lytx | Attestation Statements | 2019-05-20 | PDF 16.4 KB |
| FCC Agent Auth | Cover Letter(s) | 2019-05-20 | PDF 69.2 KB |
| FCC RFC signed 20190502b | Cover Letter(s) | 2019-05-20 | PDF 37.1 KB |
| 100-00035-000 - 1000146 (DS Ethertronics 2017-06) | Parts List/Tune Up Info | 2019-05-20 | PDF 502.2 KB |
| 1004391 Wi-Fi Dual Band custom antenna LYTX 20190314 | Parts List/Tune Up Info | 2019-05-20 | PDF 590.9 KB |
| 12518840-E4V3 FCC IC MPE REPORT | RF Exposure Info | 2019-05-20 | PDF 280.7 KB |
| Type 1DK Block Diagram Metadata only | Block Diagram | PDF 90.3 KB | |
| 305-00329-002-X2 Wifi SCH Metadata only | Schematics | PDF 283.9 KB | |
| 305-00335-001-X2_SCH Metadata only | Schematics | PDF 2.2 MB | |
| ER-SF300 Operational Description 20190515 Marked Confidential V2.0 Metadata only | Operational Description | PDF 320.7 KB | |
| KDB 594280 D02 v01r03 U-NII Device SW Security Statement_completed_lytx_20190430 Metadata only | Operational Description | PDF 112.6 KB | |
| UN1DKD Operational Description 20190305 Marked Confidential V1.1 Metadata only | Operational Description | PDF 749.7 KB |
Application Information
| Application ID | rMx5KNwefeTzoPgOt1BJRA== |
|---|---|
| Final Action Date | 2019-05-20 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0015605496 |
| Model | UN1DK-D |
| Frequency Range | 5745-5825 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | BATTERY POWERED EVENT RECORDER PLACED ON THE VEHICLE WINDSHIELD WITH WiFi MODULE |
| Responsible Party | Mary Ann Cormier, Senior Design Engineer, maryann.cormier@lytx.com |
| Agent | Grace Grace Grace, UL Verification Services, Inc., grace.rincand@ul.com |
| Technical Contact | Grace Rincand, UL Verification Services Inc., grace.rincand@ul.com |
| Non-Technical Contact | Grace Rincand, UL Verification Services Inc., grace.rincand@ul.com |
| Test Firm | Jay Kogoma, UL Verification Services Inc. (formerly UL CCS), jay.kogoma@ul.com |
| TCB Email | LST.FRE.CertNotice@ul.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 08/01/2019 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is maximum combined output power conducted. Device operates with specific antennas in 2x2 MIMO configurations as described in this filing. This device has 20 MHz, 40 MHz, 80 MHz bandwidth modes. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| rMx5KNwefeTzoPgOt1BJRA== | 2019-05-20 | Original Equipment |
| 8sJXNLfUnMVn0vYa33YSTQ== | 2019-05-20 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application rMx5KNwefeTzoPgOt1BJRA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 05/20/2019 Application Dated: 05/02/2019 |
| Lytx, Inc. |
| 9785 Towne Centre Dr |
| San Diego, CA 92121 |
| Attention: Mary Ann Cormier , Senior Design Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UO3UN1DK-D |
| Name of Grantee: | Lytx, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | BATTERY POWERED EVENT RECORDER PLACED ON THE VEHICLE WINDSHIELD WITH WiFi MODULE |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5745.0 - 5825.0 | 0.022 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.023 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.014 |
| Power listed is maximum combined output power conducted. Device operates with specific antennas in 2x2 MIMO configurations as described in this filing. This device has 20 MHz, 40 MHz, 80 MHz bandwidth modes. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application rMx5KNwefeTzoPgOt1BJRA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Lytx, Inc. 9785 Towne Centre Dr San Diego, CA 92121 United States |
Date of Grant: 05/20/2019 Application Dated: 05/02/2019 |
| Attention: Mary Ann Cormier , Senior Design Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UO3UN1DK-D |
| Name of Grantee: | Lytx, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | BATTERY POWERED EVENT RECORDER PLACED ON THE VEHICLE WINDSHIELD WITH WiFi MODULE |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5745.0 - 5825.0 | 0.022 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.023 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.014 |
| Power listed is maximum combined output power conducted. Device operates with specific antennas in 2x2 MIMO configurations as described in this filing. This device has 20 MHz, 40 MHz, 80 MHz bandwidth modes. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 05/20/2019 Application Dated: 05/02/2019 |
| Lytx, Inc. |
| 9785 Towne Centre Dr |
| San Diego, CA 92121 |
| Attention: Mary Ann Cormier , Senior Design Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UO3UN1DK-D |
| Name of Grantee: | Lytx, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | BATTERY POWERED EVENT RECORDER PLACED ON THE VEHICLE WINDSHIELD WITH WiFi MODULE |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.084 |
| Output power listed is maximum combined conducted power. Device is a 2x2 MIMO as is described in the filing. This device contains 20 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 8sJXNLfUnMVn0vYa33YSTQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Lytx, Inc. 9785 Towne Centre Dr San Diego, CA 92121 United States |
Date of Grant: 05/20/2019 Application Dated: 05/02/2019 |
| Attention: Mary Ann Cormier , Senior Design Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UO3UN1DK-D |
| Name of Grantee: | Lytx, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | BATTERY POWERED EVENT RECORDER PLACED ON THE VEHICLE WINDSHIELD WITH WiFi MODULE |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.084 |
| Output power listed is maximum combined conducted power. Device is a 2x2 MIMO as is described in the filing. This device contains 20 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |