FCC ID UPO308-0007-2

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

MiCOM Labs 575 Boulder Court Pleasanton, CA 94566

Date of Grant: 08/31/2023 Application Dated: 08/31/2023

Zinwave Ltd

Harston Mill

Harston

Cambridge, CB22 7GG United Kingdom

Attention: Ken Trayling , Design Centre Manager & Principal RF Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	UPO308-0007-2
Name of Grantee:	Zinwave Ltd
Equipment Class:	Part 20 Industrial Booster (CMRS)
Notes:	Uniwave Dual Remote Unit

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	27	617.0  -  652.0	0.25	Amp	F9W
	27	617.0  -  652.0	0.25	Amp	W9W
	27	716.0  -  746.0	0.25	Amp	F9W
	27	716.0  -  746.0	0.25	Amp	W9W
	27	746.0  -  757.0	0.25	Amp	F9W
	27	746.0  -  757.0	0.25	Amp	W9W
	22	869.0  -  894.0	0.25	Amp	F9W
	22	869.0  -  894.0	0.25	Amp	W9W
	27	3450.0  -  3550.0	0.5	Amp	F9W
	27	3450.0  -  3550.0	0.5	Amp	W9W
	27	3700.0  -  3980.0	0.5	Amp	F9W
	27	3700.0  -  3980.0	0.5	Amp	W9W

Class II permissive for adding frequency band. Output power listed is the maximum conducted composite power based on one carrier. The transmit antenna must be fixed-mounted on permanent structures, be installed to provide a separation distance of at least 0.2 m from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This application covers only the system configuration with host/master unit connected to a base station in the uplink path; operations if any with host/master unit connected to antenna or amplifier in the uplink require separate equipment authorization.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Zinwave Ltd Harston Mill Harston Cambridge, CB22 7GG United Kingdom

Date of Grant: 08/31/2023 Application Dated: 08/31/2023

Attention: Ken Trayling , Design Centre Manager & Principal RF Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	UPO308-0007-2
Name of Grantee:	Zinwave Ltd
Equipment Class:	Part 20 Industrial Booster (CMRS)
Notes:	Uniwave Dual Remote Unit
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	27	617.0  -  652.0	0.25	Amp	F9W
	27	617.0  -  652.0	0.25	Amp	W9W
	27	716.0  -  746.0	0.25	Amp	F9W
	27	716.0  -  746.0	0.25	Amp	W9W
	27	746.0  -  757.0	0.25	Amp	F9W
	27	746.0  -  757.0	0.25	Amp	W9W
	22	869.0  -  894.0	0.25	Amp	F9W
	22	869.0  -  894.0	0.25	Amp	W9W
	27	3450.0  -  3550.0	0.5	Amp	F9W
	27	3450.0  -  3550.0	0.5	Amp	W9W
	27	3700.0  -  3980.0	0.5	Amp	F9W
	27	3700.0  -  3980.0	0.5	Amp	W9W

Class II permissive for adding frequency band. Output power listed is the maximum conducted composite power based on one carrier. The transmit antenna must be fixed-mounted on permanent structures, be installed to provide a separation distance of at least 0.2 m from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This application covers only the system configuration with host/master unit connected to a base station in the uplink path; operations if any with host/master unit connected to antenna or amplifier in the uplink require separate equipment authorization.

TCB Grant - Application aNtRkuyS/KuPSZllCSeQ/g==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

MiCOM Labs 575 Boulder Court Pleasanton, CA 94566

Date of Grant: 12/09/2022 Application Dated: 12/09/2022

Zinwave Ltd

Harston Mill

Harston

Cambridge, CB22 7GG United Kingdom

Attention: James Martin , VP Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	UPO308-0007-2
Name of Grantee:	Zinwave Ltd
Equipment Class:	Part 20 Industrial Booster (CMRS)
Notes:	308-0007-2 Distributed Antenna System Remote Unit

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	27	1930.0  -  1995.0	0.5	Amp	F9W
	27	1930.0  -  1995.0	0.5	Amp	W9W
	27	2110.0  -  2180.0	0.5	Amp	F9W
	27	2110.0  -  2180.0	0.5	Amp	W9W
	27	2496.0  -  2690.0	0.5	Amp	F9W
	27	2496.0  -  2690.0	0.5	Amp	W9W

Output power listed is the maximum conducted composite power based on one carrier. The transmit antenna must be fixed-mounted on permanent structures, be installed to provide a separation distance of at least 0.2 m from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This application covers only the system configuration with host/master unit connected to a base station in the uplink path; operations if any with host/master unit connected to antenna or amplifier in the uplink require separate equipment authorization.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Zinwave Ltd Harston Mill Harston Cambridge, CB22 7GG United Kingdom

Date of Grant: 12/09/2022 Application Dated: 12/09/2022

Attention: James Martin , VP Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	UPO308-0007-2
Name of Grantee:	Zinwave Ltd
Equipment Class:	Part 20 Industrial Booster (CMRS)
Notes:	308-0007-2 Distributed Antenna System Remote Unit
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	27	1930.0  -  1995.0	0.5	Amp	F9W
	27	1930.0  -  1995.0	0.5	Amp	W9W
	27	2110.0  -  2180.0	0.5	Amp	F9W
	27	2110.0  -  2180.0	0.5	Amp	W9W
	27	2496.0  -  2690.0	0.5	Amp	F9W
	27	2496.0  -  2690.0	0.5	Amp	W9W

Output power listed is the maximum conducted composite power based on one carrier. The transmit antenna must be fixed-mounted on permanent structures, be installed to provide a separation distance of at least 0.2 m from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This application covers only the system configuration with host/master unit connected to a base station in the uplink path; operations if any with host/master unit connected to antenna or amplifier in the uplink require separate equipment authorization.

TCB Grant - Application 5B+/vqW6gKf1D6FzIEJFEg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Element Materials Technology Washington DC LLC (formerly PCTEST) 7185 Oakland Mills Road Columbia, MD 21046

Date of Grant: 07/24/2025 Application Dated: 07/24/2025

Zinwave Ltd

Harston Mill

Harston

Cambridge, CB22 7GG United Kingdom

Attention: Ken Trayling , Design Centre Manager & Principal RF Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	UPO308-0007-2
Name of Grantee:	Zinwave Ltd
Equipment Class:	Citizens Band Category A and B Devices
Notes:	Optical Radio Unit

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
EP MO	96	3550.0  -  3700.0	0.139	2.5  PM	37M9G7D
EP MO	96	3550.0  -  3700.0	0.136	2.5  PM	38M5W7D
EP MO	96	3550.0  -  3700.0	0.104	2.5  PM	18M1G7D
EP MO	96	3550.0  -  3700.0	0.131	2.5  PM	18M1W7D
EP MO	96	3550.0  -  3700.0	0.151	2.5  PM	9M01G7D
EP MO	96	3550.0  -  3700.0	0.139	2.5  PM	9M00W7D

Output power listed is maximum EIRP. This transmitter operates as a Category A CBSD and shall not be operated outdoors with antennas exceeding 6 meters in height above average terrain. The device also operates as a Category B CBSD and is limited to outdoor operations and must be professionally installed. This device supports LTE Band 48 with supported BWs of 10, 20 and 40 MHz. The maximum antenna gain allowed is 0 dBi as specified in the filing. This device supports 2x2 MIMO operation. The antennas used for this transmitter have a correlated directional gain of 0.0 dBi as described in the filing and must be installed to provide a separation distance of at least 20 cm from all persons. and must not transmit simultaneously with any other transmitter, except in accordance with FCC multi-transmitter product procedures or as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC Bureau(s), including antenna co-locating requirements of 1.1307(b)(3).

EP:	Output power is Effective Isotropic Radiated Power (EIRP)
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.