FCC ID UQACTD1000
CONCEALED WEAPON RADAR DETECTOR
by Safe Zone Systems, Inc.
Grantee Code: UQA Product Code: CTD1000
Latest application date: 2007-09-20
FCC ID Device Details
| FCC ID | UQACTD1000 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | UQA |
| Product Code | CTD1000 |
| Applicant Business | Safe Zone Systems, Inc. 🇺🇸 |
| Related Domains |  escitech.com |
| Equipment Class | CONCEALED WEAPON RADAR DETECTOR |
| Test Firm | Compliance Testing, LLC |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 9500-10550 MHz | Class II permissive change or modification of presently authorized equipment | 2007-09-20 |
| 9500-10550 MHz | Original Equipment | 2007-08-01 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| MANUAL | Users Manual | 2007-08-01 | PDF 2.1 MB |
| INTERNAL PHOTOS 1 | Internal Photos | 2007-08-01 | PDF 203.8 KB |
| INTERNAL PHOTOS 2 | Internal Photos | 2007-08-01 | PDF 177.3 KB |
| INTERNAL PHOTOS 3 | Internal Photos | 2007-08-01 | PDF 210.1 KB |
| INTERNAL PHOTOS 4 | Internal Photos | 2007-08-01 | PDF 194.8 KB |
| INTERNAL PHOTOS 5 | Internal Photos | 2007-08-01 | PDF 196.8 KB |
| INTERNAL PHOTOS 6 | Internal Photos | 2007-08-01 | PDF 148.8 KB |
| INTERNAL PHOTOS 7 | Internal Photos | 2007-08-01 | PDF 85.9 KB |
| INTERNAL PHOTOS 8 | Internal Photos | 2007-08-01 | PDF 88.1 KB |
| EXTERNAL PHOTOS 1 | External Photos | 2007-08-01 | PDF 449.5 KB |
| EXTERNAL PHOTOS 2 | External Photos | 2007-08-01 | PDF 430.7 KB |
| EXTERNAL PHOTOS 3 | External Photos | 2007-08-01 | PDF 37.8 KB |
| ID LABEL LOCATION | ID Label/Location Info | 2007-08-01 | PDF 220.6 KB |
| SAFE ZONE LABEL | ID Label/Location Info | 2007-08-01 | PDF 81.5 KB |
| test photos | Test Setup Photos | 2007-08-01 | PDF 104.5 KB |
| CERTIFICATION | Test Report | 2007-08-01 | PDF 707.3 KB |
| class II change letter | Cover Letter(s) | 2007-09-20 | PDF 30.7 KB |
| CONFIDENTIALITY LETTER | Cover Letter(s) | 2007-08-01 | PDF 5.5 KB |
| RESPONSE TO TIMCO TCB QUESTIONS | Cover Letter(s) | 2007-08-01 | PDF 8.4 KB |
| antenna scd | RF Exposure Info | 2007-09-20 | PDF 62.8 KB |
| safety evaluation | RF Exposure Info | 2007-09-20 | PDF 91.7 KB |
| MPE | RF Exposure Info | 2007-08-01 | PDF 153.9 KB |
| parts list | Parts List/Tune Up Info | 2007-08-01 | PDF 6.4 KB |
| tune up procedure | Parts List/Tune Up Info | 2007-08-01 | PDF 38.6 KB |
Application Information
| Application ID | jLhSbArp6SsQNn6WKK1Ihg== |
|---|---|
| Final Action Date | 2007-09-20 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0004060778 |
| Model | CTD1000 |
| Frequency Range | 9500-10550 MHz |
| Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter |
| Device Description | CONCEALED WEAPON RADAR DETECTOR |
| Responsible Party | Jerry Hausner, Principle Engineer, jhausner@escitech.com , 505/323-8368 |
| Test Firm | Michael Schafer, Compliance Testing, LLC, michaels@compliancetesting.com  , 480-926-3100 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95 & 97 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed .2 W and the antenna gain must not exceed 0dBd. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. (original grant 8/01/07) This class 2 permissive change adds a new antenna with a maximum gain of 16dBi. This new antenna used for this transmitter must be installed to provide a separation distance of at least 3m from all persons during normal operation. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| jLhSbArp6SsQNn6WKK1Ihg== | 2007-09-20 | Class II permissive change or modification of presently authorized equipment |
| oKVGif/lpG+rBbpakTLLMA== | 2007-08-01 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application oKVGif/lpG+rBbpakTLLMA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 | Date of Grant: 08/01/2007 Application Dated: 08/01/2007 |
| Safe Zone Systems, Inc. |
| 7700 Ouray NW |
| Albuquerque, NM 87120 |
| Attention: Jerry Hausner , Principle Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UQACTD1000 |
| Name of Grantee: | Safe Zone Systems, Inc. |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | CONCEALED WEAPON RADAR DETECTOR |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 9500.0 - 10550.0 | 0.2 | 8690.0 Hz | 41M3P0N |
| The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed .2 W and the antenna gain must not exceed 0dBd. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application oKVGif/lpG+rBbpakTLLMA==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| Safe Zone Systems, Inc. 7700 Ouray NW Albuquerque, NM 87120 United States | Date of Grant: 08/01/2007 Application Dated: 08/01/2007 |
| Attention: Jerry Hausner , Principle Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UQACTD1000 |
| Name of Grantee: | Safe Zone Systems, Inc. |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | CONCEALED WEAPON RADAR DETECTOR |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 9500.0 - 10550.0 | 0.2 | 8690.0 Hz | 41M3P0N |
| The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed .2 W and the antenna gain must not exceed 0dBd. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.
|
| Mail To: |
| EA221569 |
TCB Grant - Application jLhSbArp6SsQNn6WKK1Ihg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 | Date of Grant: 09/20/2007 Application Dated: 09/19/2007 |
| Safe Zone Systems, Inc. |
| 7700 Ouray NW |
| Albuquerque, NM 87120 |
| Attention: Jerry Hausner , Principle Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UQACTD1000 |
| Name of Grantee: | Safe Zone Systems, Inc. |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | CONCEALED WEAPON RADAR DETECTOR |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 9500.0 - 10550.0 | 0.2 | 8690.0 Hz | 41.3 |
| The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed .2 W and the antenna gain must not exceed 0dBd. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. (original grant 8/01/07) This class 2 permissive change adds a new antenna with a maximum gain of 16dBi. This new antenna used for this transmitter must be installed to provide a separation distance of at least 3m from all persons during normal operation. |
EAS Grant - Application jLhSbArp6SsQNn6WKK1Ihg==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| Safe Zone Systems, Inc. 7700 Ouray NW Albuquerque, NM 87120 United States | Date of Grant: 09/20/2007 Application Dated: 09/19/2007 |
| Attention: Jerry Hausner , Principle Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UQACTD1000 |
| Name of Grantee: | Safe Zone Systems, Inc. |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | CONCEALED WEAPON RADAR DETECTOR |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 9500.0 - 10550.0 | 0.2 | 8690.0 Hz | 41.3 |
| The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed .2 W and the antenna gain must not exceed 0dBd. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. (original grant 8/01/07) This class 2 permissive change adds a new antenna with a maximum gain of 16dBi. This new antenna used for this transmitter must be installed to provide a separation distance of at least 3m from all persons during normal operation.
|
| Mail To: |
| EA769409 |