FCC ID UVF-VISTA9113DWAG

Dual Band Combo Module

by Draegerwerk AG & Co. KGaA

Grantee Code: UVF   Product Code: VISTA9113DWAG
Latest application date: 2020-05-27

FCC ID Device Details

FCC IDUVF-VISTA9113DWAG
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeUVF
Product CodeVISTA9113DWAG
Applicant BusinessDraegerwerk AG & Co. KGaA 🇩🇪
Related Domains draeger.com
Equipment ClassDual Band Combo Module
Test FirmShenzhen BALUN Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2020-05-27
2412-2462 MHzOriginal Equipment2020-05-27

Exhibits

DocumentTypeAvailableFile
User_ManualUsers Manual2020-11-24PDF 489 KB
User_manualUsers Manual2020-11-24PDF 489 KB
Int_PhotosInternal Photos2020-11-24PDF 266.1 KB
Internal_PhotosInternal Photos2020-11-24PDF 266.1 KB
Ext photoExternal Photos2020-11-24PDF 1.1 MB
Ext_Photos Metadata onlyExternal Photos2020-11-24PDF 1.1 MB
External_Photos Metadata onlyExternal Photos2020-11-24PDF 1.1 MB
LabelID Label/Location Info2020-05-27PDF 25.3 KB
Label_and_Label_LocationID Label/Location Info2020-05-27PDF 25.3 KB
Test_Setup_PhotosTest Setup Photos2020-11-24PDF 962.5 KB
DFS test reportTest Report2020-05-27PDF 1.8 MB
DTS test report_WLANTest Report2020-05-27PDF 4.8 MB
FCC DFS test reportTest Report2020-05-27PDF 2.2 MB
NII Test Data Part 1Test Report2020-05-27PDF 2.4 MB
NII test data Part 2Test Report2020-05-27PDF 315.7 KB
NII test data Part 3Test Report2020-05-27PDF 994.5 KB
NII test reportTest Report2020-05-27PDF 4.6 MB
Test reportTest Report2020-05-27PDF 5.2 MB
Agent Authorization Rev 1.0Cover Letter(s)2020-05-27PDF 46.1 KB
Cover Letter for Modular ApprovalCover Letter(s)2020-05-27PDF 150.4 KB
FCC Software Configuration Control DeclarationCover Letter(s)2020-05-27PDF 83.8 KB
FCC_Authorization LetterCover Letter(s)2020-05-27PDF 203.2 KB
FCC_Long_Term_Only_Confidentiality_RequestCover Letter(s)2020-05-27PDF 309 KB
FCC_Short_&_Long_Term_Confidentiality_RequestCover Letter(s)2020-05-27PDF 309 KB
FCC exposure evluationRF Exposure Info2020-05-27PDF 100.3 KB
Block_Diagram Metadata onlyBlock DiagramPDF 38.7 KB
Schematic Metadata onlySchematicsPDF 1.3 MB
Operation-Description Metadata onlyOperational DescriptionPDF 72.9 KB
software security information information Metadata onlySDR Software/Security InfPDF 62.7 KB

Application Information

Application IDrd7ynfPN1ei/a0s7Duj1JQ==
Final Action Date2020-05-27
Application PurposeOriginal Equipment
Applicant FRN0015858863
ModelVISTA9113DWAG
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionDual Band Combo Module
Responsible PartyAlexandra Schleier, Manager Regulatory Affairs, Alexandra.Schleier@draeger.com , +49-451 882-2041
Technical ContactDraegerwerk AG & Co. KGaA, Alexandra.Schleier@draeger.com
Test FirmHanson Lin, Shenzhen BALUN Technology Co., Ltd., Hanson.Lin@baluntek.com , 86-755-66833830
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date11/24/2020
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted power. Single Modular Approval The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

Applications

Application IDDatePurpose
rd7ynfPN1ei/a0s7Duj1JQ==2020-05-27Original Equipment
jSMdoz6cbr1rUkyyeBpFAQ==2020-05-27Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.067760015CCC
5180-5240 MHz0.0136815E38, CC
5260-5320 MHz0.0146215E38, CC, ND
5500-5700 MHz0.011815E38, CC, ND
5745-5825 MHz0.0145215E38, CC

Grants

TCB Grant - Application rd7ynfPN1ei/a0s7Duj1JQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 05/27/2020

Application Dated: 05/27/2020
Draegerwerk AG & Co. KGaA
Moislinger Allee 53 - 55
Luebeck, 23542
Germany
 
Attention: Alexandra Schleier , Manager Regulatory Affairs

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UVF-VISTA9113DWAG
Name of Grantee:  Draegerwerk AG & Co. KGaA
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Dual Band Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.01368  
38 CC ND 15E 5260.0  -  5320.0 0.01462  
38 CC ND 15E 5500.0  -  5700.0 0.0118  
38 CC 15E 5745.0  -  5825.0 0.01452  

Output power listed is conducted power. Single Modular Approval The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application rd7ynfPN1ei/a0s7Duj1JQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Draegerwerk AG & Co. KGaA
Moislinger Allee 53 - 55
Luebeck, 23542
Germany
  Date of Grant: 05/27/2020

Application Dated: 05/27/2020
 
Attention: Alexandra Schleier , Manager Regulatory Affairs

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UVF-VISTA9113DWAG
Name of Grantee:  Draegerwerk AG & Co. KGaA
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Dual Band Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.01368  
38 CC ND 15E 5260.0  -  5320.0 0.01462  
38 CC ND 15E 5500.0  -  5700.0 0.0118  
38 CC 15E 5745.0  -  5825.0 0.01452  

Output power listed is conducted power. Single Modular Approval The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application jSMdoz6cbr1rUkyyeBpFAQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 05/27/2020

Application Dated: 05/27/2020
Draegerwerk AG & Co. KGaA
Moislinger Allee 53 - 55
Luebeck, 23542
Germany
 
Attention: Alexandra Schleier , Manager Regulatory Affairs

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UVF-VISTA9113DWAG
Name of Grantee:  Draegerwerk AG & Co. KGaA
Equipment Class: Digital Transmission System
Notes: Dual Band Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.06776  

Output power listed is conducted power. Single Modular Approval The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application jSMdoz6cbr1rUkyyeBpFAQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Draegerwerk AG & Co. KGaA
Moislinger Allee 53 - 55
Luebeck, 23542
Germany
  Date of Grant: 05/27/2020

Application Dated: 05/27/2020
 
Attention: Alexandra Schleier , Manager Regulatory Affairs

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UVF-VISTA9113DWAG
Name of Grantee:  Draegerwerk AG & Co. KGaA
Equipment Class: Digital Transmission System
Notes: Dual Band Combo Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.06776  

Output power listed is conducted power. Single Modular Approval The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: