FCC ID UWT-RX-4002-02
INTELLIGENT NETWORK NODE (RX INN)
by Acurix Networks Pty Ltd
Grantee Code: UWT Product Code: RX400202
Latest application date: 2007-05-11
FCC ID Device Details
| FCC ID | UWT-RX-4002-02 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | UWT |
| Product Code | RX400202 |
| Applicant Business | Acurix Networks Pty Ltd 🇦🇺 |
| Related Domains |  acurixnetworks.com |
| Equipment Class | INTELLIGENT NETWORK NODE (RX INN) |
| Test Firm | EMC Technologies Pty. Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2007-05-11 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: NI3-MP86005001 Grant Date: 03/17/2006 | 2007-05-11 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| USERS MANUAL | Users Manual | 2007-05-11 | PDF 892.2 KB |
| users manual | Users Manual | 2007-05-11 | PDF 892.2 KB |
| INTERNAL PHOTOS | Internal Photos | 2007-05-11 | PDF 308.2 KB |
| WLAN LOCATION PHOTOS | Internal Photos | 2007-05-11 | PDF 54.8 KB |
| internal photos | Internal Photos | 2007-05-11 | PDF 360.9 KB |
| EXTERNAL PHOTOS | External Photos | 2007-05-11 | PDF 107.1 KB |
| external photos | External Photos | 2007-05-11 | PDF 108.3 KB |
| LABEL INFORMATION | ID Label/Location Info | 2007-05-11 | PDF 208.3 KB |
| label sample | ID Label/Location Info | 2007-05-11 | PDF 205.8 KB |
| ANTENNA DETAILS | Operational Description | 2007-05-11 | PDF 9.6 KB |
| TEST SETUP PHOTOS | Test Setup Photos | 2007-05-11 | PDF 706.3 KB |
| BAND EDGE 1 | Test Report | 2007-05-11 | PDF 50.2 KB |
| BAND EDGE 2 | Test Report | 2007-05-11 | PDF 50.7 KB |
| BAND EDGE 3 | Test Report | 2007-05-11 | PDF 49.4 KB |
| BANDWIDTH 1 | Test Report | 2007-05-11 | PDF 72.4 KB |
| BANDWIDTH 2 | Test Report | 2007-05-11 | PDF 71 KB |
| BANDWIDTH 3 | Test Report | 2007-05-11 | PDF 74.1 KB |
| GRAPHS OF EMI MEASUREMENT | Test Report | 2007-05-11 | PDF 144.8 KB |
| HARMONICS 1 | Test Report | 2007-05-11 | PDF 163.7 KB |
| HARMONICS 2 | Test Report | 2007-05-11 | PDF 159.7 KB |
| HARMONICS 3 | Test Report | 2007-05-11 | PDF 162 KB |
| MEASUREMENT INSTRUMENTATION | Test Report | 2007-05-11 | PDF 15.9 KB |
| SPECTRAL DENSITY 1 | Test Report | 2007-05-11 | PDF 72.4 KB |
| SPECTRAL DENSITY 2 | Test Report | 2007-05-11 | PDF 67.4 KB |
| SPECTRAL DENSITY 3 | Test Report | 2007-05-11 | PDF 72.7 KB |
| TEST REPORT | Test Report | 2007-05-11 | PDF 128.3 KB |
| CORRESPONDENCE LETTER | Cover Letter(s) | 2007-05-11 | PDF 183.4 KB |
| COVER LETTER | Cover Letter(s) | 2007-05-11 | PDF 31.2 KB |
| cover letter | Cover Letter(s) | 2007-05-11 | PDF 31.7 KB |
| response from customer | Cover Letter(s) | 2007-05-11 | PDF 28.3 KB |
| RF EXPOSURE | RF Exposure Info | 2007-05-11 | PDF 20.7 KB |
Application Information
| Application ID | YjZlYVw53rjiZPfFSM1P3Q== |
|---|---|
| Final Action Date | 2007-05-11 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0015934904 |
| Model | -RX-4002-02 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | INTELLIGENT NETWORK NODE (RX INN) |
| Responsible Party | Mark Middleton, Technical Director, markm@acurixnetworks.com , 61 418 365 621 |
| Test Firm | Michael Evans, EMC Technologies Pty. Ltd., brisbane@emctech.com.au  , 617-3875-2455 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module is restricted to OEM and OEM-integrator installations only. The OEM is instructed to ensure that end-users have no manual instructions to remove or install the device. This device may not be sold directly to end-users. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This class 2 permissive change adds a specific host configuration and allows co-location with specific antennas or transmitters, as described and evaluated in this filing. Final antenna installation and operating configurations of this transmitter must not exceed the EIRP of the configurations used for compliance, as documented in this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| YjZlYVw53rjiZPfFSM1P3Q== | 2007-05-11 | Class II permissive change or modification of presently authorized equipment |
| CSmFSpNAx2Bgj8gZRuYNNA== | 2007-05-11 | Change in identification of presently authorized equipment. Original FCC ID: NI3-MP86005001 Grant Date: 03/17/2006 |
Grants
TCB Grant - Application YjZlYVw53rjiZPfFSM1P3Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 | Date of Grant: 05/11/2007 Application Dated: 05/11/2007 |
| Acurix Networks Pty Ltd |
| Level 2, 140 Colin Street |
| West Perth, 6005 Australia |
| Attention: Mark Middleton , Technical Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UWT-RX-4002-02 |
| Name of Grantee: | Acurix Networks Pty Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | INTELLIGENT NETWORK NODE (RX INN) |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.423 | |||
| 15C | 5745.0 - 5825.0 | 0.186 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module is restricted to OEM and OEM-integrator installations only. The OEM is instructed to ensure that end-users have no manual instructions to remove or install the device. This device may not be sold directly to end-users. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This class 2 permissive change adds a specific host configuration and allows co-location with specific antennas or transmitters, as described and evaluated in this filing. Final antenna installation and operating configurations of this transmitter must not exceed the EIRP of the configurations used for compliance, as documented in this filing. |
EAS Grant - Application YjZlYVw53rjiZPfFSM1P3Q==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| Acurix Networks Pty Ltd Level 2, 140 Colin Street West Perth, 6005 Australia | Date of Grant: 05/11/2007 Application Dated: 05/11/2007 |
| Attention: Mark Middleton , Technical Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UWT-RX-4002-02 |
| Name of Grantee: | Acurix Networks Pty Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | INTELLIGENT NETWORK NODE (RX INN) |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.423 | |||
| 15C | 5745.0 - 5825.0 | 0.186 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module is restricted to OEM and OEM-integrator installations only. The OEM is instructed to ensure that end-users have no manual instructions to remove or install the device. This device may not be sold directly to end-users. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This class 2 permissive change adds a specific host configuration and allows co-location with specific antennas or transmitters, as described and evaluated in this filing. Final antenna installation and operating configurations of this transmitter must not exceed the EIRP of the configurations used for compliance, as documented in this filing.
|
| Mail To: |
| EA365632 |
TCB Grant - Application CSmFSpNAx2Bgj8gZRuYNNA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION | TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
| Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 | Date of Grant: 05/11/2007 Application Dated: 05/11/2007 |
| Acurix Networks Pty Ltd |
| Level 2, 140 Colin Street |
| West Perth, 6005 Australia |
| Attention: Mark Middleton , Technical Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UWT-RX-4002-02 |
| Name of Grantee: | Acurix Networks Pty Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Intelligent Network Node (RX INN) |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.423 | |||
| 15C | 5745.0 - 5825.0 | 0.186 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module is restricted to OEM and OEM-integrator installations only. The OEM is instructed to ensure that end-users have no manual instructions to remove or install the device. This device may not be sold directly to end-users. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application CSmFSpNAx2Bgj8gZRuYNNA==
| COPY | FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION | COPY |
| Certification |
| Acurix Networks Pty Ltd Level 2, 140 Colin Street West Perth, 6005 Australia | Date of Grant: 05/11/2007 Application Dated: 05/11/2007 |
| Attention: Mark Middleton , Technical Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UWT-RX-4002-02 |
| Name of Grantee: | Acurix Networks Pty Ltd |
| Equipment Class: | Digital Transmission System |
| Notes: | Intelligent Network Node (RX INN) |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.423 | |||
| 15C | 5745.0 - 5825.0 | 0.186 |
| Power Output listed is Conducted. Modular approval. This module is approved for use in mobile only configurations. This module is restricted to OEM and OEM-integrator installations only. The OEM is instructed to ensure that end-users have no manual instructions to remove or install the device. This device may not be sold directly to end-users. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
|
| Mail To: |
| EA656695 |