FCC ID UZ7211486030A

Radio Module

by Zebra Technologies Corporation

Grantee Code: UZ7   Product Code: 211486030A
Latest application date: 2016-05-03

FCC ID Device Details

FCC IDUZ7211486030A
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeUZ7
Product Code211486030A
Applicant BusinessZebra Technologies Corporation 🇺🇸
Related Domains zebra.com tw.bureauveritas.com
Equipment ClassRadio Module
Test FirmBureau Veritas CPS (H.K.) Ltd. Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2016-05-03
2412-2472 MHzClass II permissive change or modification of presently authorized equipment2016-05-03
2412-2472 MHzOriginal Equipment2012-04-12
5180-5240 MHzOriginal Equipment2012-04-12
2402-2480 MHzOriginal Equipment2012-04-12

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2012-04-12PDF 1.2 MB
Internal PhotosInternal Photos2012-04-12PDF 1.2 MB
External PhotosExternal Photos2012-04-12PDF 242.2 KB
Label and LocationID Label/Location Info2012-04-12PDF 151.8 KB
Test Setup PhotosTest Setup Photos2012-04-12PDF 485.1 KB
Test Report (NII)Test Report2016-05-03PDF 672.3 KB
Test Report DFSTest Report2012-04-12PDF 288.2 KB
Test Report DSSTest Report2012-04-12PDF 715.9 KB
Test Report DTSTest Report2012-04-12PDF 1.7 MB
Test Report UNIITest Report2012-04-12PDF 987.3 KB
Agent AuthorizationCover Letter(s)2016-05-03PDF 77.5 KB
Confidentiality Request - Long TermCover Letter(s)2016-05-03PDF 77.5 KB
Description of ChangeCover Letter(s)2016-05-03PDF 77.5 KB
Authorization LetterCover Letter(s)2012-04-12PDF 115 KB
Confidentiality LetterCover Letter(s)2012-04-12PDF 194.3 KB
Limited Modular Approval LetterCover Letter(s)2012-04-12PDF 175.3 KB
Microstrip Line Cover LetterCover Letter(s)2012-04-12PDF 295.4 KB
RF Exposure Co-Located Report V2RF Exposure Info2012-04-12PDF 208.8 KB
RF Exposure Co-Location Report V2RF Exposure Info2012-04-12PDF 208.8 KB
RF Exposure Info MPERF Exposure Info2012-04-12PDF 65.1 KB
Software Operational description Metadata onlyOperational DescriptionPDF 200.6 KB

Application Information

Application IDtjSYt1PLpaFZn+zVNgasJQ==
Final Action Date2016-05-03
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0015642663
Model211486030A
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionRadio Module
Responsible PartyQianlin Zhou, Regulatory Specialist, Larry.Zhou@zebra.com , 346-260-3543
AgentAmanda Amanda Amanda, Bureau Veritas Consumer Products Services(H.K.), amanda.wu@tw.bureauveritas.com , 886-3-318-3232
Technical ContactAmanda Wu, Bureau Veritas Consumer Products Services(H.K.), amanda.wu@tw.bureauveritas.com , 886-3-318-3232
Non-Technical ContactAmanda Wu, Bureau Veritas Consumer Products Services(H.K.), amanda.wu@tw.bureauveritas.com , 886-3-318-3232
Test FirmRichard Chen, Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch, richard.chen@tw.bureauveritas.com , 886-3-3183232
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsCIIPC: Add 5745-5825 MHz. Power Output listed is Conducted. Limited Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. . This transmitter is restricted to indoor use only within the 5.15-5.25GHz band. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
tjSYt1PLpaFZn+zVNgasJQ==2016-05-03Class II permissive change or modification of presently authorized equipment
Y+LjUlR+6i7VmDK6kYl3YA==2016-05-03Class II permissive change or modification of presently authorized equipment
xVdiRUX1sbli9JOJXZ725w==2012-04-12Original Equipment
n+H2tXGgGuBes4M3WMuUdg==2012-04-12Original Equipment
22UrFi3+Jr1VnkHT5VgEQQ==2012-04-12Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.009000015CCC
2412-2472 MHz0.257000015CCC
2412-2472 MHz0.25715CCC
5180-5240 MHz0.03215E38, CC
5180-5240 MHz0.03215ECC
5260-5320 MHz0.10215E38, CC, ND
5260-5320 MHz0.10215ECC, ND
5500-5700 MHz0.09715E38, CC, ND
5500-5700 MHz0.09715ECC, ND
5745-5825 MHz0.15915CCC
5745-5825 MHz0.07415E38, CC

Grants

TCB Grant - Application Y+LjUlR+6i7VmDK6kYl3YA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 05/03/2016

Application Dated: 04/28/2016
Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
 
Attention: Qianlin Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7211486030A
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Digital Transmission System
Notes: Radio Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2472.0 0.257  

CIIPC: Remove 5745 -5825MHz.

Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Y+LjUlR+6i7VmDK6kYl3YA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States
  Date of Grant: 05/03/2016

Application Dated: 04/28/2016
 
Attention: Qianlin Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7211486030A
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Digital Transmission System
Notes: Radio Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2472.0 0.257  

CIIPC: Remove 5745 -5825MHz.

Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application xVdiRUX1sbli9JOJXZ725w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 04/12/2012

Application Dated: 04/12/2012
Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
 
Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7211486030A
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Digital Transmission System
Notes: 21-148603-0A
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2472.0 0.257  
CC 15C 5745.0  -  5825.0 0.159  

Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application xVdiRUX1sbli9JOJXZ725w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States
  Date of Grant: 04/12/2012

Application Dated: 04/12/2012
 
Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7211486030A
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Digital Transmission System
Notes: 21-148603-0A
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2472.0 0.257  
CC 15C 5745.0  -  5825.0 0.159  

Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application tjSYt1PLpaFZn+zVNgasJQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 05/03/2016

Application Dated: 04/28/2016
Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
 
Attention: Qianlin Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7211486030A
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Radio Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.032  
38 CC ND 15E 5260.0  -  5320.0 0.102  
38 CC ND 15E 5500.0  -  5700.0 0.097  
38 CC 15E 5745.0  -  5825.0 0.074  

CIIPC: Add 5745-5825 MHz.

Power Output listed is Conducted. Limited Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. . This transmitter is restricted to indoor use only within the 5.15-5.25GHz band. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application tjSYt1PLpaFZn+zVNgasJQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States
  Date of Grant: 05/03/2016

Application Dated: 04/28/2016
 
Attention: Qianlin Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7211486030A
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Radio Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.032  
38 CC ND 15E 5260.0  -  5320.0 0.102  
38 CC ND 15E 5500.0  -  5700.0 0.097  
38 CC 15E 5745.0  -  5825.0 0.074  

CIIPC: Add 5745-5825 MHz.

Power Output listed is Conducted. Limited Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. . This transmitter is restricted to indoor use only within the 5.15-5.25GHz band. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application n+H2tXGgGuBes4M3WMuUdg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 04/12/2012

Application Dated: 04/12/2012
Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
 
Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7211486030A
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 21-148603-0A
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.032  
CC ND 15E 5260.0  -  5320.0 0.102  
CC ND 15E 5500.0  -  5700.0 0.097  

Power Output listed is Conducted. Limited Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. . This transmitter is restricted to indoor use only within the 5.15-5.25GHz band. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application n+H2tXGgGuBes4M3WMuUdg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States
  Date of Grant: 04/12/2012

Application Dated: 04/12/2012
 
Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7211486030A
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 21-148603-0A
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.032  
CC ND 15E 5260.0  -  5320.0 0.102  
CC ND 15E 5500.0  -  5700.0 0.097  

Power Output listed is Conducted. Limited Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. . This transmitter is restricted to indoor use only within the 5.15-5.25GHz band. The transmitter is also restricted under the premise that it shall meet all the other requirements specified in Section 15.407 and no configuration controls are provided to change the frequency of operations outside the grant of certification for US operation. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 22UrFi3+Jr1VnkHT5VgEQQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 04/12/2012

Application Dated: 04/12/2012
Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
 
Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7211486030A
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 21-148603-0A
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.009  

Power Output listed is conducted. Limited Modular Approval. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 22UrFi3+Jr1VnkHT5VgEQQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States
  Date of Grant: 04/12/2012

Application Dated: 04/12/2012
 
Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7211486030A
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 21-148603-0A
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.009  

Power Output listed is conducted. Limited Modular Approval. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: