FCC ID UZ72119976501
RFID Reader
by Zebra Technologies Corporation
Grantee Code: UZ7 Product Code: 2119976501
Latest application date: 2024-04-25
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.75-927.25 MHz | Class II permissive change or modification of presently authorized equipment | 2024-04-25 |
| 902.75-927.25 MHz | Original Equipment | 2016-04-14 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual | Users Manual | 2016-10-11 | PDF 730 KB |
| IntPho_1 | Internal Photos | 2024-10-23 | PDF 5.5 MB |
| IntPho_2 | Internal Photos | 2024-10-23 | PDF 4.8 MB |
| Internal photo | Internal Photos | 2016-10-11 | PDF 1.9 MB |
| ExtPho | External Photos | 2024-10-23 | PDF 2.5 MB |
| External photo | External Photos | 2016-10-11 | PDF 563.7 KB |
| ID label/Location info | ID Label/Location Info | 2016-04-14 | PDF 251.4 KB |
| 21-199765-01_Report_RF_US_Part15C_UHF RFID (photo | Test Setup Photos | 2024-10-23 | PDF 232.1 KB |
| Test setup photo | Test Setup Photos | 2016-10-11 | PDF 399.6 KB |
| 21-199765-01_Report_RF_US_Part15C_UHF RFID_r2 | Test Report | 2024-04-25 | PDF 1.9 MB |
| ATLAS_Times-7_A4030L Antenna | Test Report | 2024-04-25 | PDF 1.7 MB |
| Test Report Revised | Test Report | 2016-04-14 | PDF 2.4 MB |
| Test report Metadata only | Test Report | 2016-04-14 | PDF 2.2 MB |
| Attestation Statements US agent_2.911d7_UZ7 | Attestation Statements | 2024-04-25 | PDF 734.6 KB |
| UZ72119976501_Attestation_Covered List_2.911d5(i) | Attestation Statements | 2024-04-25 | PDF 437.7 KB |
| UZ72119976501_Attestation_Covered List_2.911d5(ii) | Attestation Statements | 2024-04-25 | PDF 437.7 KB |
| UZ72119976501 C2PCPX letter | Cover Letter(s) | 2024-04-25 | PDF 1 MB |
| UZ72119976501_Coverletter-FCC | Cover Letter(s) | 2024-04-25 | PDF 468.8 KB |
| Cover Letter Modular Approval Letter | Cover Letter(s) | 2016-04-14 | PDF 343.9 KB |
| DOA letter | Cover Letter(s) | 2016-04-14 | PDF 343.9 KB |
| Letter for Radio Module | Cover Letter(s) | 2016-04-14 | PDF 24.1 KB |
| confdientiality letter | Cover Letter(s) | 2016-04-14 | PDF 343.9 KB |
| 21-199765-01_Report_RF Exposure_US | RF Exposure Info | 2024-04-25 | PDF 318.4 KB |
| Human Exposure | RF Exposure Info | 2016-04-14 | PDF 273.7 KB |
| Block Diagram_21-199765-01 Metadata only | Block Diagram | PDF 109.2 KB | |
| Block diagram Metadata only | Block Diagram | PDF 83.7 KB | |
| Schem_sd-002067-01_10 Metadata only | Schematics | PDF 372.6 KB | |
| Schematics Metadata only | Schematics | PDF 340.7 KB | |
| 21-199765-01_change note_Mar012024 Metadata only | Operational Description | PDF 3 MB | |
| Operational description Metadata only | Operational Description | PDF 218.5 KB | |
| Theory of Operations_21-199765-01 Metadata only | Operational Description | PDF 228.4 KB | |
| PartsLst_PA-002067-10_Rev11 Metadata only | Parts List/Tune Up Info | PDF 146.4 KB |
Application Information
| Application ID | +/aRESBBOeoGf3V7PMOGYg== |
|---|---|
| Final Action Date | 2024-04-25 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0015642663 |
| Model | 2119976501 |
| Frequency Range | 902.75-927.25 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | RFID Reader |
| Responsible Party | Qianlin Zhou, Regulatory Specialist, Larry.Zhou@zebra.com  , 346-260-3543 |
| Agent | Irene Irene Irene, Sporton International Inc., irenechung@sporton.com.tw  , 886-3-327-3456 |
| Test Firm | Alex Chen, SPORTON International Inc., alex@sporton.com.tw , +886-3-327-3456 |
| TCB Email | QA65@sporton-usa.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 10/23/2024 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 34 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. Only those antenna(s) tested with the device or similar type antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change: Use the non-pin-to-pin compatible RFID ASIC chip to replace the RFID Skyworks demodulator chip. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| +/aRESBBOeoGf3V7PMOGYg== | 2024-04-25 | Class II permissive change or modification of presently authorized equipment |
| a73Ph9gX3Aq9GoTwGT4lQA== | 2016-04-14 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 902.75-927.25 MHz | 0.7060000 | 15C |
Grants
TCB Grant - Application a73Ph9gX3Aq9GoTwGT4lQA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 04/14/2016 Application Dated: 04/14/2016 |
| Zebra Technologies Corporation |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ72119976501 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Reader |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.706 |
| Singular Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 34 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. Only those antenna(s) tested with the device or similar type antenna(s) with equal or lesser gain may be used with this transmitter. |
EAS Grant - Application a73Ph9gX3Aq9GoTwGT4lQA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 04/14/2016 Application Dated: 04/14/2016 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ72119976501 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Reader |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.706 |
| Singular Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 34 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. Only those antenna(s) tested with the device or similar type antenna(s) with equal or lesser gain may be used with this transmitter. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Sporton International (USA) Inc. 1175 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 04/25/2024 Application Dated: 04/11/2024 |
| Zebra Technologies Corporation |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ72119976501 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Reader |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.706 |
| Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 34 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. Only those antenna(s) tested with the device or similar type antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change: Use the non-pin-to-pin compatible RFID ASIC chip to replace the RFID Skyworks demodulator chip. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application +/aRESBBOeoGf3V7PMOGYg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 04/25/2024 Application Dated: 04/11/2024 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ72119976501 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Reader |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.706 |
| Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 34 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. Only those antenna(s) tested with the device or similar type antenna(s) with equal or lesser gain may be used with this transmitter. Class II Permissive Change: Use the non-pin-to-pin compatible RFID ASIC chip to replace the RFID Skyworks demodulator chip. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |