FCC ID UZ77528PA

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669

Date of Grant: 02/06/2014 Application Dated: 02/05/2014

Zebra Technologies Corporation

1 Zebra Plaza

Holtsville, NY 11742

Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	UZ77528PA
Name of Grantee:	Zebra Technologies Corporation
Equipment Class:	PCS Licensed Transmitter
Notes:	GSM/GPRS/UMTS/HSPA+ Module
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	22H	824.2  -  848.8	2.399	2.5  PM	249KGXW
	22H	824.2  -  848.8	1.072	2.5  PM	235KG7W
	22H	826.4  -  846.6	0.692	2.5  PM	4M17F9W
	24E	1850.2  -  1909.8	1.122	2.5  PM	247KGXW
	24E	1850.2  -  1909.8	0.871	2.5  PM	241KG7W
	24E	1852.4  -  1907.6	0.676	2.5  PM	4M17F9W

Output power listed is peak conducted. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. This OEM module is approved for use in products operating as fixed or portable transmitting device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for end users and installers to satisfy RF exposure compliance requirements. Antenna gain must meet RF exposure and max radiated output power limits of the applicable rule section. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The max. antenna gain for this device as reported to the FCC is: 3.92 dBi (850MHz) and 2.5 dBi (1900MHz). (Date of Grant: 01/27/2014) Class II Permissive Change; This Class II Permissive change is to integrate this module into the Motorola Workabout Pro 4, Model: 7528XP. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with Motorola Solutions Inc. accessories only as described in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures or as documented in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.63 W/kg and 0.78 W/kg, respectively. Class II Permissive Change allows third party installation of this module according to the installation guide and KDB 996369.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States

Date of Grant: 02/06/2014 Application Dated: 02/05/2014

Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	UZ77528PA
Name of Grantee:	Zebra Technologies Corporation
Equipment Class:	PCS Licensed Transmitter
Notes:	GSM/GPRS/UMTS/HSPA+ Module
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	22H	824.2  -  848.8	2.399	2.5  PM	249KGXW
	22H	824.2  -  848.8	1.072	2.5  PM	235KG7W
	22H	826.4  -  846.6	0.692	2.5  PM	4M17F9W
	24E	1850.2  -  1909.8	1.122	2.5  PM	247KGXW
	24E	1850.2  -  1909.8	0.871	2.5  PM	241KG7W
	24E	1852.4  -  1907.6	0.676	2.5  PM	4M17F9W

Output power listed is peak conducted. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. This OEM module is approved for use in products operating as fixed or portable transmitting device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for end users and installers to satisfy RF exposure compliance requirements. Antenna gain must meet RF exposure and max radiated output power limits of the applicable rule section. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The max. antenna gain for this device as reported to the FCC is: 3.92 dBi (850MHz) and 2.5 dBi (1900MHz). (Date of Grant: 01/27/2014) Class II Permissive Change; This Class II Permissive change is to integrate this module into the Motorola Workabout Pro 4, Model: 7528XP. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with Motorola Solutions Inc. accessories only as described in this filing. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures or as documented in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for stand-alone and simultaneous transmission exposure conditions are 0.63 W/kg and 0.78 W/kg, respectively. Class II Permissive Change allows third party installation of this module according to the installation guide and KDB 996369.

TCB Grant - Application BOiBm1WeFX/RwXfehHJcNA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669

Date of Grant: 01/27/2014 Application Dated: 01/24/2014

Zebra Technologies Corporation

1 Zebra Plaza

Holtsville, NY 11742

Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	UZ77528PA
Name of Grantee:	Zebra Technologies Corporation
Equipment Class:	PCS Licensed Transmitter
Notes:	GSM/GPRS/UMTS/HSPA Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	22H	824.2  -  848.8	2.399	2.5  PM	249KGXW
	22H	824.2  -  848.8	1.072	2.5  PM	235KG7W
	22H	826.4  -  846.6	0.692	2.5  PM	4M17F9W
	24E	1850.2  -  1909.8	1.122	2.5  PM	247KGXW
	24E	1850.2  -  1909.8	0.871	2.5  PM	241KG7W
	24E	1852.4  -  1907.6	0.676	2.5  PM	4M17F9W

Output power listed is peak conducted. This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations. This OEM module is approved for use in products operating as fixed or portable transmitting device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for endusers and installers to satisfy RF exposure compliance requirements. Antenna gain must meet RF exposure and max radiated output power limits of the applicable rule section. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The max. antenna gain for this device as reported to the FCC is: 3.92 dBi (850MHz) and 2.5 dBi (1900MHz).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States

Date of Grant: 01/27/2014 Application Dated: 01/24/2014

Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	UZ77528PA
Name of Grantee:	Zebra Technologies Corporation
Equipment Class:	PCS Licensed Transmitter
Notes:	GSM/GPRS/UMTS/HSPA Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	22H	824.2  -  848.8	2.399	2.5  PM	249KGXW
	22H	824.2  -  848.8	1.072	2.5  PM	235KG7W
	22H	826.4  -  846.6	0.692	2.5  PM	4M17F9W
	24E	1850.2  -  1909.8	1.122	2.5  PM	247KGXW
	24E	1850.2  -  1909.8	0.871	2.5  PM	241KG7W
	24E	1852.4  -  1907.6	0.676	2.5  PM	4M17F9W

Output power listed is peak conducted. This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations. This OEM module is approved for use in products operating as fixed or portable transmitting device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for endusers and installers to satisfy RF exposure compliance requirements. Antenna gain must meet RF exposure and max radiated output power limits of the applicable rule section. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The max. antenna gain for this device as reported to the FCC is: 3.92 dBi (850MHz) and 2.5 dBi (1900MHz).

Mail To: