FCC ID UZ7AP0622

Wireless Dual Band AP

by Zebra Technologies Corporation

Grantee Code: UZ7   Product Code: AP0622
Latest application date: 2016-06-01

FCC ID Device Details

FCC IDUZ7AP0622
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeUZ7
Product CodeAP0622
Applicant BusinessZebra Technologies Corporation 🇺🇸
Related Domains zebra.com
Equipment ClassWireless Dual Band AP
Test FirmSPORTON International Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2016-06-01
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2016-05-27
5280-5320 MHzClass II permissive change or modification of presently authorized equipment2013-04-16
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2013-04-16
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2013-03-14
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2012-09-05
5260-5320 MHzClass II permissive change or modification of presently authorized equipment2012-06-29
2412-2462 MHzOriginal Equipment2012-03-15
5180-5240 MHzOriginal Equipment2012-03-14

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2012-06-29PDF 1.4 MB
user manualUsers Manual2012-03-15PDF 1.2 MB
InphotoInternal Photos2013-04-16PDF 3 MB
Internal PhotosInternal Photos2012-09-05PDF 1.9 MB
InphotoInternal Photos2012-06-29PDF 1.9 MB
internal photoInternal Photos2012-03-15PDF 1.9 MB
ExphotoExternal Photos2013-04-16PDF 1.3 MB
External PhotosExternal Photos2012-09-05PDF 3.3 MB
ExphotoExternal Photos2012-06-29PDF 3.3 MB
external photoExternal Photos2012-03-15PDF 3.3 MB
Lebel LocationID Label/Location Info2012-06-29PDF 349.4 KB
label infoID Label/Location Info2012-03-15PDF 349.4 KB
label locationID Label/Location Info2012-03-14PDF 349.4 KB
Test Photo_15.247Test Setup Photos2013-04-16PDF 502.9 KB
TEST PHOTOSTest Setup Photos2012-06-29PDF 906.5 KB
test setup photoTest Setup Photos2012-03-15PDF 1.1 MB
Test setup photoTest Setup Photos2012-03-14PDF 1.1 MB
Co-location ReportTest Report2013-04-16PDF 119.8 KB
FCC RF ReportTest Report2013-04-16PDF 2.4 MB
FCC RF Report_15.247Test Report2013-04-16PDF 2.2 MB
Test Photo_15.407Test Report2013-04-16PDF 848 KB
FCC Client DFS ReportTest Report2012-09-05PDF 236.2 KB
FCC DFS Test ReportTest Report2012-06-29PDF 1.1 MB
FCC RF Test Rpoert Part 5Test Report2012-06-29PDF 70.9 KB
FCC RF Test Rpoert_Part 1Test Report2012-06-29PDF 1.8 MB
FCC RF Test Rpoert_Part 2Test Report2012-06-29PDF 1.8 MB
FCC RF Test Rpoert_Part 3Test Report2012-06-29PDF 3.9 MB
FCC RF Test Rpoert_Part 4Test Report2012-06-29PDF 5.5 MB
RF report 1Test Report2012-03-15PDF 1.4 MB
RF report 2Test Report2012-03-15PDF 1.6 MB
RF report 3Test Report2012-03-15PDF 1.5 MB
RF report 4Test Report2012-03-15PDF 4.2 MB
RF report 5Test Report2012-03-15PDF 4.7 MB
RF report 6Test Report2012-03-15PDF 5 MB
RF report 7Test Report2012-03-15PDF 4.4 MB
RF report 1Test Report2012-03-14PDF 1.9 MB
RF report 2Test Report2012-03-14PDF 4.6 MB
co-location reportTest Report2012-03-14PDF 111.9 KB
FCC Attestations LetterCover Letter(s)2013-04-16PDF 76.9 KB
FCC Attestations and Requests LetterCover Letter(s)2012-09-05PDF 80 KB
FCC Attestations and Requests LetterCover Letter(s)2012-06-29PDF 102 KB
15B DoC letterAttestation Statements2012-03-15PDF 129.4 KB
Attestation LetterCover Letter(s)PDF 85 KB
Cover LetterCover Letter(s)2016-06-01PDF 84.5 KB
Power of AttorneyCover Letter(s)2012-06-29PDF 382.4 KB
POACover Letter(s)2012-03-15PDF 185.8 KB
confidential request letterCover Letter(s)2012-03-15PDF 213.5 KB
Request for dismissalCover Letter(s)PDF 33.6 KB
MPE ReportRF Exposure Info2013-04-16PDF 102.2 KB
MPE Report_15.247RF Exposure Info2013-04-16PDF 101.7 KB
MPE ReportRF Exposure Info2012-06-29PDF 102.9 KB
MPERF Exposure Info2012-03-15PDF 119.5 KB
co-location reportRF Exposure Info2012-03-15PDF 111.9 KB
Operational Description Software Security Metadata onlyOperational DescriptionPDF 405.3 KB

Application Information

Application IDkKleKDZlo/mzbvtVaa03Ig==
Final Action Date2016-06-01
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0015642663
ModelAP0622
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWireless Dual Band AP
Responsible PartyQianlin Zhou, Regulatory Specialist, Larry.Zhou@zebra.com , 346-260-3543
Test FirmSharon Jiang, SPORTON International Inc., sharonjiang@sporton.com.tw , 886-3-656-9065
TCB Emailtei@timcoengr.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput Power listed is the maximum combined conducted peak output power as indicated in the filing. This device must be professionally installed. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz and 5755 to 5795 MHz respectively.

Applications

Application IDDatePurpose
kKleKDZlo/mzbvtVaa03Ig==2016-06-01Class II permissive change or modification of presently authorized equipment
7SqhwXknFenaeKa9xV5ueA==2016-05-27Class II permissive change or modification of presently authorized equipment
OMXoempTt58X5sPmI6t88Q==2013-04-16Class II permissive change or modification of presently authorized equipment
A9WY3MYLWA74tbD1DY9Ocg==2013-04-16Class II permissive change or modification of presently authorized equipment
Xr19Ss9iYi9DK17zBvZLow==2013-03-14Class II permissive change or modification of presently authorized equipment
5WLOxd7Hb6yXourwFlXN3Q==2012-09-05Class II permissive change or modification of presently authorized equipment
6nM/t2IuHWlx4SCZXpBJ4g==2012-06-29Class II permissive change or modification of presently authorized equipment
5qA7oztbWBgpTtSBQJTHNA==2012-03-15Original Equipment
NB4tlpV78Fae2ZLMI0birw==2012-03-14Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.535000015CCC, MO
2412-2462 MHz0.53515CCC, MO
2412-2462 MHz0.53515CMO
2422-2452 MHz0.21815CCC, MO
2422-2452 MHz0.21815CMO
5180-5240 MHz0.034215E48, CC, MO
5180-5240 MHz0.034215ECC, MO
5190-5230 MHz0.033515ECC, MO
5260-5320 MHz0.086315ECC, MO
5270-5310 MHz0.086115ECC, MO
5280-5320 MHz0.086315ECC, MO, ND
5310 MHz0.056415ECC, MO, ND
5500-5700 MHz0.084915ECC, MO
5500-5580 MHz0.084915ECC, MO, ND
5510-5670 MHz0.085315ECC, MO
5510-5550 MHz0.085315ECC, MO, ND
5660-5700 MHz0.066815ECC, MO, ND
5670 MHz0.084115ECC, MO, ND
5745-5825 MHz0.28615E48, CC, MO
5745-5825 MHz0.28615CCC, MO
5745-5825 MHz0.28615CMO
5755-5795 MHz0.19515CCC, MO
5755-5795 MHz0.19515CMO

Grants

TCB Grant - Application Xr19Ss9iYi9DK17zBvZLow==

This application does not exist.

EAS Grant - Application Xr19Ss9iYi9DK17zBvZLow==

This application currently is not in final status.

TCB Grant - Application OMXoempTt58X5sPmI6t88Q==

This application does not exist.

EAS Grant - Application OMXoempTt58X5sPmI6t88Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States
  Date of Grant: 04/16/2013

Application Dated: 03/15/2013
 
Attention: Larry (Qianlin) Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7AP0622
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Dual Band AP
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO ND 15E 5280.0  -  5320.0 0.0863  
CC MO ND 15E 5310.0  -  5310.0 0.0564  
CC MO ND 15E 5500.0  -  5580.0 0.0849  
CC MO ND 15E 5510.0  -  5550.0 0.0853  
CC MO ND 15E 5660.0  -  5700.0 0.0668  
CC MO ND 15E 5670.0  -  5670.0 0.0841  

Class II permissive change adds antennas as documented in this filling. Output power listed is the maximum combined conducted peak output power as indicated in the filling. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device has 20 MHz and 40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application NB4tlpV78Fae2ZLMI0birw==

Mail To:
Sharon Jiang,
Sporton International Inc.
No.8, Lane 724, Bo-ai St., Jhubei City,
Hsinchu County, 302
Taiwan
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 03/14/2012

Application Dated: 03/14/2012
Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
 
Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7AP0622
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Dual Band AP
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0342  
CC MO 15E 5190.0  -  5230.0 0.0335  

Output Power listed is the maximum combined conducted peak output power as indicated in the filing. This device must be professionally installed. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 5190 to 5230 MHz.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application NB4tlpV78Fae2ZLMI0birw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States
  Date of Grant: 03/14/2012

Application Dated: 03/14/2012
 
Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7AP0622
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Dual Band AP
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0342  
CC MO 15E 5190.0  -  5230.0 0.0335  

Output Power listed is the maximum combined conducted peak output power as indicated in the filing. This device must be professionally installed. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 5190 to 5230 MHz.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application kKleKDZlo/mzbvtVaa03Ig==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 06/01/2016

Application Dated: 05/31/2016
Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
 
Attention: Qianlin Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7AP0622
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Digital Transmission System
Notes: Wireless Dual Band AP
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.535  

Output Power listed is the maximum combined conducted peak output power as indicated in the filing. This device must be professionally installed. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz and 5755 to 5795 MHz respectively.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application kKleKDZlo/mzbvtVaa03Ig==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States
  Date of Grant: 06/01/2016

Application Dated: 05/31/2016
 
Attention: Qianlin Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7AP0622
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Digital Transmission System
Notes: Wireless Dual Band AP
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.535  

Output Power listed is the maximum combined conducted peak output power as indicated in the filing. This device must be professionally installed. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz and 5755 to 5795 MHz respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application A9WY3MYLWA74tbD1DY9Ocg==

This application does not exist.

EAS Grant - Application A9WY3MYLWA74tbD1DY9Ocg==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States
  Date of Grant: 04/16/2013

Application Dated: 03/15/2013
 
Attention: Larry (Qianlin) Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7AP0622
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Digital Transmission System
Notes: Wireless Dual Band AP
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.535  
CC MO 15C 2422.0  -  2452.0 0.218  
CC MO 15C 5745.0  -  5825.0 0.286  
CC MO 15C 5755.0  -  5795.0 0.195  

Class II permissive change adds antennas as documented in this filling. Output power listed is the maximum combined conducted peak output power as indicated in the filling. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device has 20 MHz and 40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 7SqhwXknFenaeKa9xV5ueA==

Mail To:
Sharon Jiang,
Sporton International Inc.
No.8, Lane 724, Bo-ai St., Jhubei City,
Hsinchu County, 302
Taiwan
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 05/27/2016

Application Dated: 05/26/2016
Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
 
Attention: Qianlin Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7AP0622
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Dual Band AP
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
48 CC MO 15E 5180.0  -  5240.0 0.0342  
48 CC MO 15E 5745.0  -  5825.0 0.286  

Output power listed is the maximum combined conducted peak output power as indicated in the filling. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device has 20 MHz and 40 MHz bandwidth modes.

48: The device has been approved under § 15.407(b)(4)(ii) for antenna gains greater than 10 dBi and cannot be manufactured, marketed, sold or imported after March 2, 2018.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 7SqhwXknFenaeKa9xV5ueA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States
  Date of Grant: 05/27/2016

Application Dated: 05/26/2016
 
Attention: Qianlin Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7AP0622
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Dual Band AP
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
48 CC MO 15E 5180.0  -  5240.0 0.0342  
48 CC MO 15E 5745.0  -  5825.0 0.286  

Output power listed is the maximum combined conducted peak output power as indicated in the filling. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This device has 20 MHz and 40 MHz bandwidth modes.


48: The device has been approved under § 15.407(b)(4)(ii) for antenna gains greater than 10 dBi and cannot be manufactured, marketed, sold or imported after March 2, 2018.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 6nM/t2IuHWlx4SCZXpBJ4g==

This application does not exist.

EAS Grant - Application 6nM/t2IuHWlx4SCZXpBJ4g==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States
  Date of Grant: 06/29/2012

Application Dated: 04/16/2012
 
Attention: Larry (Qianlin) Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7AP0622
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Dual Band AP
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5260.0  -  5320.0 0.0863  
CC MO 15E 5270.0  -  5310.0 0.0861  
CC MO 15E 5500.0  -  5700.0 0.0849  
CC MO 15E 5510.0  -  5670.0 0.0853  

Output power is conducted. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 5WLOxd7Hb6yXourwFlXN3Q==

Mail To:
Vera Shu,
Sporton International Inc.
No.8, Lane 724, Bo-ai St., Jhubei City,
Hsinchu, 302
Taiwan
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 09/05/2012

Application Dated: 09/05/2012
Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
 
Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7AP0622
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Dual Band AP
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0342  
CC MO 15E 5190.0  -  5230.0 0.0335  
CC MO 15E 5260.0  -  5320.0 0.0863  
CC MO 15E 5270.0  -  5310.0 0.0861  
CC MO 15E 5500.0  -  5700.0 0.0849  
CC MO 15E 5510.0  -  5670.0 0.0853  

Class II Permissive Change Filing adds DFS Client Mode test report as documented in this filing. Output Power listed is the maximum combined conducted peak output power as indicated in the filing. Outdoor operation is subject to the professional installation instruction requirements as described in the User Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 5190 to 5230 MHz, 5270 to 5310 MHz, and 5510 to 5670 MHz respectively.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 5WLOxd7Hb6yXourwFlXN3Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States
  Date of Grant: 09/05/2012

Application Dated: 09/05/2012
 
Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7AP0622
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Dual Band AP
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0342  
CC MO 15E 5190.0  -  5230.0 0.0335  
CC MO 15E 5260.0  -  5320.0 0.0863  
CC MO 15E 5270.0  -  5310.0 0.0861  
CC MO 15E 5500.0  -  5700.0 0.0849  
CC MO 15E 5510.0  -  5670.0 0.0853  

Class II Permissive Change Filing adds DFS Client Mode test report as documented in this filing. Output Power listed is the maximum combined conducted peak output power as indicated in the filing. Outdoor operation is subject to the professional installation instruction requirements as described in the User Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 5190 to 5230 MHz, 5270 to 5310 MHz, and 5510 to 5670 MHz respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 5qA7oztbWBgpTtSBQJTHNA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 03/15/2012

Application Dated: 03/15/2012
Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
 
Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7AP0622
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Digital Transmission System
Notes: Wireless Dual Band AP
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.535  
CC MO 15C 2422.0  -  2452.0 0.218  
CC MO 15C 5745.0  -  5825.0 0.286  
CC MO 15C 5755.0  -  5795.0 0.195  

Output Power listed is the maximum combined conducted peak output power as indicated in the filing. This device must be professionally installed. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz and 5755 to 5795 MHz respectively.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 5qA7oztbWBgpTtSBQJTHNA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States
  Date of Grant: 03/15/2012

Application Dated: 03/15/2012
 
Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7AP0622
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Digital Transmission System
Notes: Wireless Dual Band AP
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.535  
CC MO 15C 2422.0  -  2452.0 0.218  
CC MO 15C 5745.0  -  5825.0 0.286  
CC MO 15C 5755.0  -  5795.0 0.195  

Output Power listed is the maximum combined conducted peak output power as indicated in the filing. This device must be professionally installed. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25 cm from all persons and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz and 5755 to 5795 MHz respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: