FCC ID UZ7AP6
Access Point Radio Module 6
by Zebra Technologies Corporation
Grantee Code: UZ7 Product Code: AP6
Latest application date: 2016-05-27
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2016-05-27 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2016-05-27 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2012-11-05 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2012-11-05 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2012-09-07 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2012-07-13 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2011-09-30 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2011-09-30 |
| 5180-5240 MHz | Original Equipment | 2011-02-02 |
| 2412-2462 MHz | Original Equipment | 2011-02-02 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| AP 6511 Install Guide Rev B 050412 | Users Manual | 2012-07-13 | PDF 1.1 MB |
| AP 6521 Install Guide Rev B 050412 | Users Manual | 2012-07-13 | PDF 1.3 MB |
| Antenna Installation Guide 050412 | Users Manual | 2012-07-13 | PDF 4.3 MB |
| Manual | Users Manual | 2012-03-27 | PDF 312.4 KB |
| Manual | Users Manual | 2011-03-18 | PDF 306.6 KB |
| Internal photos | Internal Photos | 2012-03-27 | PDF 2.9 MB |
| Internal photos | Internal Photos | 2011-03-18 | PDF 2.8 MB |
| Antenna Details 0 | External Photos | 2012-11-05 | PDF 500 KB |
| Antenna Details 01 | External Photos | 2012-11-05 | PDF 844.9 KB |
| Antenna Details 02 | External Photos | 2012-11-05 | PDF 500 KB |
| external photos | External Photos | 2012-03-27 | PDF 250.8 KB |
| External photos | External Photos | 2011-03-18 | PDF 229.5 KB |
| FCC label location | ID Label/Location Info | 2011-02-02 | PDF 46.3 KB |
| DFS_Client Instructions | Operational Description | 2012-09-07 | PDF 57.1 KB |
| Proposed Test Procedure for FCC Testing WLAN Sensors | Operational Description | 2012-09-07 | PDF 40.4 KB |
| Test Photos | Test Setup Photos | 2012-11-05 | PDF 687.5 KB |
| Test Photos | Test Setup Photos | 2012-11-05 | PDF 1.9 MB |
| Tsup DFS MCN 041312 | Test Setup Photos | 2012-07-13 | PDF 114.5 KB |
| Tsup DFS NCAP 041312 | Test Setup Photos | 2012-07-13 | PDF 57.3 KB |
| Tsup NII 041312 update | Test Setup Photos | 2012-07-13 | PDF 1.9 MB |
| EMC setup | Test Setup Photos | 2012-03-27 | PDF 282.6 KB |
| EMC setup | Test Setup Photos | 2012-03-27 | PDF 110.5 KB |
| Set up | Test Setup Photos | 2011-03-18 | PDF 1.7 MB |
| Set up | Test Setup Photos | 2011-03-18 | PDF 1.6 MB |
| Test Report | Test Report | 2012-11-05 | PDF 1.9 MB |
| Test Report 01 | Test Report | 2012-11-05 | PDF 4.5 MB |
| Test Report 02 | Test Report | 2012-11-05 | PDF 3.2 MB |
| Test Report 03 | Test Report | 2012-11-05 | PDF 587.7 KB |
| Test Report 04 | Test Report | 2012-11-05 | PDF 263.4 KB |
| Test Report 05 | Test Report | 2012-11-05 | PDF 596.7 KB |
| Test Report 1 | Test Report | 2012-09-07 | PDF 426.1 KB |
| Test Report 2 | Test Report | 2012-09-07 | PDF 465.1 KB |
| Test Report 3 | Test Report | 2012-09-07 | PDF 465.1 KB |
| AP 6 Test Report NII 051712 Part 1 | Test Report | 2012-07-13 | PDF 3.2 MB |
| AP 6 Test Report NII 051712 Part 2 | Test Report | 2012-07-13 | PDF 3.1 MB |
| AP 6 Test Report NII 051712 Part 3 | Test Report | 2012-07-13 | PDF 3 MB |
| AP 6 Test Report NII 051712 Part 4 | Test Report | 2012-07-13 | PDF 3.2 MB |
| AP 6 Test Report NII 051712 Part 5 | Test Report | 2012-07-13 | PDF 3.2 MB |
| AP 6 Test Report NII 051712 Part 6 | Test Report | 2012-07-13 | PDF 4 MB |
| DFS MCN Configuration | Test Report | 2012-07-13 | PDF 2.2 MB |
| DFS NCAP Configuration | Test Report | 2012-07-13 | PDF 1.7 MB |
| NII Test Report Appendix Ant 1 041312 | Test Report | 2012-07-13 | PDF 1.4 MB |
| NII Test Report Appendix Ant 2 041312 | Test Report | 2012-07-13 | PDF 1.4 MB |
| NII Test Report Appendix Ant 3 041312 | Test Report | 2012-07-13 | PDF 1.4 MB |
| NII Test Report Appendix Ant 4 041312 | Test Report | 2012-07-13 | PDF 1.3 MB |
| NII Test Report Appendix Ant 5 041312 | Test Report | 2012-07-13 | PDF 1.4 MB |
| Test report | Test Report | 2011-09-30 | PDF 1 MB |
| Test report | Test Report | 2011-09-30 | PDF 800 KB |
| Test report 1 | Test Report | 2011-02-02 | PDF 2.2 MB |
| Test report 1 | Test Report | 2011-02-02 | PDF 3.6 MB |
| Test report 2 | Test Report | 2011-02-02 | PDF 2.9 MB |
| Test report 2 | Test Report | 2011-02-02 | PDF 1.9 MB |
| Test report 3 | Test Report | 2011-02-02 | PDF 4 MB |
| Test report 3 | Test Report | 2011-02-02 | PDF 2.1 MB |
| Test report 4 | Test Report | 2011-02-02 | PDF 2.9 MB |
| Test report 4 | Test Report | 2011-02-02 | PDF 3.7 MB |
| Test report app A | Test Report | 2011-02-02 | PDF 711.5 KB |
| Test report app A | Test Report | 2011-02-02 | PDF 2.2 MB |
| Test report app B | Test Report | 2011-02-02 | PDF 710.8 KB |
| Test report app B | Test Report | 2011-02-02 | PDF 2.2 MB |
| Test report app C | Test Report | 2011-02-02 | PDF 715.3 KB |
| Test report app C | Test Report | 2011-02-02 | PDF 2.2 MB |
| Test report app D | Test Report | 2011-02-02 | PDF 666.7 KB |
| Test report app D | Test Report | 2011-02-02 | PDF 2.1 MB |
| Test report app E | Test Report | 2011-02-02 | PDF 2.2 MB |
| Test report app E | Test Report | 2011-02-02 | PDF 679.7 KB |
| PC Cover Letter and Attestations | Cover Letter(s) | 2012-09-07 | PDF 96.9 KB |
| Cover letter | Cover Letter(s) | 2016-05-27 | PDF 85.7 KB |
| Agent | Cover Letter(s) | 2012-11-05 | PDF 18.6 KB |
| C2PC Letter | Cover Letter(s) | 2012-11-05 | PDF 18.5 KB |
| ACB Comments and Response | Cover Letter(s) | 2012-07-13 | PDF 342.2 KB |
| PC Cover Letter | Cover Letter(s) | 2012-07-13 | PDF 37.7 KB |
| POA | Cover Letter(s) | 2012-07-13 | PDF 18.6 KB |
| POA | Cover Letter(s) | 2011-09-30 | PDF 17.6 KB |
| Reason for PC | Cover Letter(s) | 2011-09-30 | PDF 20.9 KB |
| Request for STC | Cover Letter(s) | 2011-09-30 | PDF 21.4 KB |
| Modular request letter | Cover Letter(s) | 2011-02-02 | PDF 121.7 KB |
| POA | Cover Letter(s) | 2011-02-02 | PDF 20 KB |
| Request for confidentialty and STC | Cover Letter(s) | 2011-02-02 | PDF 80.4 KB |
| MPE | RF Exposure Info | 2011-02-02 | PDF 326.8 KB |
| Software Security Metadata only | SDR Software/Security Inf | PDF 353.8 KB |
Application Information
| Application ID | rAfOT3jupB08L+9yJyHCmg== |
|---|---|
| Final Action Date | 2016-05-27 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0015642663 |
| Model | AP6 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Access Point Radio Module 6 |
| Responsible Party | Qianlin Zhou, Regulatory Specialist, Larry.Zhou@zebra.com |
| Test Firm | Alex Chen, SPORTON International Inc., alex@sporton.com.tw |
| TCB Email | stuart.beck@nemko.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is conducted. Modular approval. Device is a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device may be used in mobile only configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II permissive change for removing the 5745-5825 MHz frequency band from DTS grant. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| rAfOT3jupB08L+9yJyHCmg== | 2016-05-27 | Class II permissive change or modification of presently authorized equipment |
| Yt8b7QhjNGlL9sufPLjfwg== | 2016-05-27 | Class II permissive change or modification of presently authorized equipment |
| jYEtCThabMm8IEGLH7WnYQ== | 2012-11-05 | Class II permissive change or modification of presently authorized equipment |
| E+QvlZtJnXQ0RZSjiV6u8g== | 2012-11-05 | Class II permissive change or modification of presently authorized equipment |
| gZjRNizjmJ4Muz3f8A9b8A== | 2012-09-07 | Class II permissive change or modification of presently authorized equipment |
| I6fT+I/lGODOFSHVYRR9JQ== | 2012-07-13 | Class II permissive change or modification of presently authorized equipment |
| U5UkPmSTfDno9FXkvAK7Ew== | 2011-09-30 | Class II permissive change or modification of presently authorized equipment |
| NBaFsDUufreLrnWaGxU1Cw== | 2011-09-30 | Class II permissive change or modification of presently authorized equipment |
| kMxqEY+iu1Xb5dezi7JEow== | 2011-02-02 | Original Equipment |
| 1LuEXEDhgn5rZss2JE61ow== | 2011-02-02 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2412-2462 MHz | 0.993 | 15C | CC, MO |
| 2422-2452 MHz | 0.991 | 15C | CC, MO |
| 5180-5240 MHz | 0.047 | 15E | 49, CC, MO |
| 5180-5240 MHz | 0.047 | 15E | CC, MO |
| 5190-5230 MHz | 0.049 | 15E | 49, CC, MO |
| 5190-5230 MHz | 0.049 | 15E | CC, MO |
| 5260-5320 MHz | 0.243 | 15E | CC, MO, ND |
| 5260-5320 MHz | 0.243 | 15E | CC, MO |
| 5500-5580 MHz | 0.247 | 15E | CC, MO, ND |
| 5500-5580 MHz | 0.247 | 15E | CC, MO |
| 5660-5700 MHz | 0.247 | 15E | CC, MO, ND |
| 5660-5700 MHz | 0.247 | 15E | CC, MO |
| 5745-5825 MHz | 0.977 | 15E | 49, CC, MO |
| 5745-5825 MHz | 0.977 | 15C | CC, MO |
| 5755-5795 MHz | 0.991 | 15E | 49, CC, MO |
| 5755-5795 MHz | 0.991 | 15C | CC, MO |
Grants
TCB Grant - Application Yt8b7QhjNGlL9sufPLjfwg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 05/27/2016 Application Dated: 05/27/2016 |
| Zebra Technologies Corporation |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7AP6 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Access Point Radio Module 6 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 49 CC MO | 15E | 5180.0 - 5240.0 | 0.047 | ||
| 49 CC MO | 15E | 5190.0 - 5230.0 | 0.049 | ||
| 49 CC MO | 15E | 5745.0 - 5825.0 | 0.977 | ||
| 49 CC MO | 15E | 5755.0 - 5795.0 | 0.991 |
| Power Output listed is conducted. Modular approval. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device is for use in a mobile only configuration. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change for disabling DFS band (5250-5350MHz and 5470-5725MHz) via software, and adding 5745-5825 MHz frequency band on NII grant. |
| 49: | The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application Yt8b7QhjNGlL9sufPLjfwg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 05/27/2016 Application Dated: 05/27/2016 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7AP6 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Access Point Radio Module 6 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 49 CC MO | 15E | 5180.0 - 5240.0 | 0.047 | ||
| 49 CC MO | 15E | 5190.0 - 5230.0 | 0.049 | ||
| 49 CC MO | 15E | 5745.0 - 5825.0 | 0.977 | ||
| 49 CC MO | 15E | 5755.0 - 5795.0 | 0.991 |
| Power Output listed is conducted. Modular approval. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device is for use in a mobile only configuration. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change for disabling DFS band (5250-5350MHz and 5470-5725MHz) via software, and adding 5745-5825 MHz frequency band on NII grant. |
| 49: | The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/30/2011 Application Dated: 09/29/2011 |
| Zebra Technologies Corporation |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Mark Luksich , DMTS, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7AP6 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Access Point Radio Module 6 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.047 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.049 |
| Power Output listed is conducted. Modular approval. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device is for use in a mobile only configuration. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This PC2 adds the NCAP PIFA shown in the filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application U5UkPmSTfDno9FXkvAK7Ew==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 09/30/2011 Application Dated: 09/29/2011 |
| Attention: Mark Luksich , DMTS, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7AP6 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Access Point Radio Module 6 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.047 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.049 |
| Power Output listed is conducted. Modular approval. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device is for use in a mobile only configuration. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This PC2 adds the NCAP PIFA shown in the filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 05/27/2016 Application Dated: 05/27/2016 |
| Zebra Technologies Corporation |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7AP6 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Access Point Radio Module 6 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.993 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.991 |
| Power Output listed is conducted. Modular approval. Device is a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device may be used in mobile only configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II permissive change for removing the 5745-5825 MHz frequency band from DTS grant. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application rAfOT3jupB08L+9yJyHCmg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 05/27/2016 Application Dated: 05/27/2016 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7AP6 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Access Point Radio Module 6 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.993 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.991 |
| Power Output listed is conducted. Modular approval. Device is a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device may be used in mobile only configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II permissive change for removing the 5745-5825 MHz frequency band from DTS grant. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/30/2011 Application Dated: 09/29/2011 |
| Zebra Technologies Corporation |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Mark Luksich , DMTS, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7AP6 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Access Point Radio Module 6 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.993 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.991 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.977 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.991 |
| Power Output listed is conducted. Modular approval. Device is a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device may be used in mobile only configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This PC2 adds the NCAP PIFA shown in the filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application NBaFsDUufreLrnWaGxU1Cw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 09/30/2011 Application Dated: 09/29/2011 |
| Attention: Mark Luksich , DMTS, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7AP6 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Access Point Radio Module 6 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.993 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.991 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.977 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.991 |
| Power Output listed is conducted. Modular approval. Device is a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device may be used in mobile only configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This PC2 adds the NCAP PIFA shown in the filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 02/02/2011 Application Dated: 02/01/2011 |
| Zebra Technologies Corporation |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Mark Luksich , DMTS, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7AP6 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Access Point Radio Module 6 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.047 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.049 |
| Power Output listed is conducted. Modular approval. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device is for use in a mobile only configuration. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application kMxqEY+iu1Xb5dezi7JEow==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 02/02/2011 Application Dated: 02/01/2011 |
| Attention: Mark Luksich , DMTS, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7AP6 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Access Point Radio Module 6 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.047 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.049 |
| Power Output listed is conducted. Modular approval. Device is an 802.11n device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device is for use in a mobile only configuration. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 11/05/2012 Application Dated: 11/05/2012 |
| Zebra Technologies Corporation |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Mark Luksich , DMTS, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7AP6 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Access Point Radio Module 6 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.993 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.991 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.977 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.991 |
| Power Output listed is conducted. Modular approval. Device is a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device may be used in mobile only configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This C2PC adds new antennas, as described in the filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application jYEtCThabMm8IEGLH7WnYQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 11/05/2012 Application Dated: 11/05/2012 |
| Attention: Mark Luksich , DMTS, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7AP6 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Access Point Radio Module 6 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.993 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.991 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.977 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.991 |
| Power Output listed is conducted. Modular approval. Device is a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device may be used in mobile only configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This C2PC adds new antennas, as described in the filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 07/13/2012 Application Dated: 05/21/2012 |
| Attention: Larry (Qianlin) Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7AP6 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Access Point Radio Module 6 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.047 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.243 | ||
| CC MO | 15E | 5500.0 - 5580.0 | 0.247 | ||
| CC MO | 15E | 5660.0 - 5700.0 | 0.247 |
| Output power is conducted. This device has 20 MHz and 40 MHz modes. Outdoor operation is subject to the professional installation instruction requirements as described in the Users Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
|
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Michael Violette, | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| American Certification Body, Inc. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6731 Whittier Avenue Suite C110 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| McLean, VA 22101 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/07/2012 Application Dated: 09/03/2012 |
| Zebra Technologies Corporation |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Mark Luksich , DMTS, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7AP6 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Access Point Radio Module 6 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.047 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.243 | ||
| CC MO ND | 15E | 5500.0 - 5580.0 | 0.247 | ||
| CC MO ND | 15E | 5660.0 - 5700.0 | 0.247 |
| Output power is conducted. This device has 20 MHz and 40 MHz modes. Outdoor operation is subject to the professional installation instruction requirements as described in the User s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application gZjRNizjmJ4Muz3f8A9b8A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 09/07/2012 Application Dated: 09/03/2012 |
| Attention: Mark Luksich , DMTS, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7AP6 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Access Point Radio Module 6 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.047 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.243 | ||
| CC MO ND | 15E | 5500.0 - 5580.0 | 0.247 | ||
| CC MO ND | 15E | 5660.0 - 5700.0 | 0.247 |
| Output power is conducted. This device has 20 MHz and 40 MHz modes. Outdoor operation is subject to the professional installation instruction requirements as described in the User s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 11/05/2012 Application Dated: 11/05/2012 |
| Zebra Technologies Corporation |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Mark Luksich , DMTS, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7AP6 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Access Point Radio Module 6 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.047 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.243 | ||
| CC MO ND | 15E | 5500.0 - 5580.0 | 0.247 | ||
| CC MO ND | 15E | 5660.0 - 5700.0 | 0.247 |
| Output power is conducted. This device has 20 MHz and 40 MHz modes. Outdoor operation is subject to the professional installation instruction requirements as described in the User s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This C2PC adds new antennas, as described in the filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application E+QvlZtJnXQ0RZSjiV6u8g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 11/05/2012 Application Dated: 11/05/2012 |
| Attention: Mark Luksich , DMTS, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7AP6 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Access Point Radio Module 6 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.047 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.243 | ||
| CC MO ND | 15E | 5500.0 - 5580.0 | 0.247 | ||
| CC MO ND | 15E | 5660.0 - 5700.0 | 0.247 |
| Output power is conducted. This device has 20 MHz and 40 MHz modes. Outdoor operation is subject to the professional installation instruction requirements as described in the User s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This C2PC adds new antennas, as described in the filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 02/02/2011 Application Dated: 02/01/2011 |
| Zebra Technologies Corporation |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Mark Luksich , DMTS, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7AP6 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Access Point Radio Module 6 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.993 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.991 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.977 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.991 |
| Power Output listed is conducted. Modular approval. Device is a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device may be used in mobile only configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 1LuEXEDhgn5rZss2JE61ow==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 02/02/2011 Application Dated: 02/01/2011 |
| Attention: Mark Luksich , DMTS, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7AP6 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Access Point Radio Module 6 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.993 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.991 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.977 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.991 |
| Power Output listed is conducted. Modular approval. Device is a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. This device may be used in mobile only configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |