FCC ID UZ7AP7131N

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101

Date of Grant: 08/26/2009 Application Dated: 08/12/2009

Zebra Technologies Corporation

1 Zebra Plaza

Holtsville, NY 11742

Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	UZ7AP7131N
Name of Grantee:	Zebra Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	11n Access-Point

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.999
CC	15C	5745.0  -  5825.0	0.94

Power Output listed is the maximum combined conducted output power. Device is an 802.11n router in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antennas used for this transmitter must be installed to provide a separation distance of at least 28 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States

Date of Grant: 08/26/2009 Application Dated: 08/12/2009

Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	UZ7AP7131N
Name of Grantee:	Zebra Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	11n Access-Point
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.999
CC	15C	5745.0  -  5825.0	0.94

Power Output listed is the maximum combined conducted output power. Device is an 802.11n router in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antennas used for this transmitter must be installed to provide a separation distance of at least 28 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application pyE84TQhJ6+MVJ/JMh3drA==

EAS Grant - Application pyE84TQhJ6+MVJ/JMh3drA==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States

Date of Grant: 04/09/2012 Application Dated: 01/12/2012

Attention: Larry (Qianlin) Zhou , Regulatory Specialist

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	UZ7AP7131N
Name of Grantee:	Zebra Technologies Corporation
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	11n Access Point
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0  -  5240.0	0.046
CC MO	15E	5260.0  -  5320.0	0.045
CC MO	15E	5500.0  -  5580.0	0.044
CC MO	15E	5660.0  -  5700.0	0.044

This Permissive Change/Modification was originally issued on 04/05/2012.

Output power is conducted. Operation in 5.15-5.25 GHz band is for indoor use only. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application imsrtZ0MOSKsu9PF85rkyA==

EAS Grant - Application imsrtZ0MOSKsu9PF85rkyA==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States

Date of Grant: 06/21/2011 Application Dated: 05/10/2011

Attention: Larry (Qianlin) Zhou , Regulatory Specialist

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	UZ7AP7131N
Name of Grantee:	Zebra Technologies Corporation
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Access Point
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0  -  5240.0	0.046
CC	15E	5260.0  -  5320.0	0.045
CC	15E	5500.0  -  5580.0	0.044
CC	15E	5660.0  -  5700.0	0.044

Output power is conducted. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application H6/Qvm4gcIutkGF6jHxBUQ==

EAS Grant - Application H6/Qvm4gcIutkGF6jHxBUQ==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States

Date of Grant: 08/23/2013 Application Dated: 06/21/2013

Attention: Larry (Qianlin) Zhou , Regulatory Specialist

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	UZ7AP7131N
Name of Grantee:	Zebra Technologies Corporation
Equipment Class:	Digital Transmission System
Notes:	11n Access-Point
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.999
CC	15C	5745.0  -  5825.0	0.94

Output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 28 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application eRUYFDqUfehnsCXR9iG3eg==

Mail To:

Michael Violette, 6731 Whittier Ave, Suite C110

American Certification Body, Inc.

McLean, VA 22101

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101

Date of Grant: 08/26/2009 Application Dated: 08/11/2009

Zebra Technologies Corporation

1 Zebra Plaza

Holtsville, NY 11742

Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	UZ7AP7131N
Name of Grantee:	Zebra Technologies Corporation
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	11n Access-Point

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0  -  5240.0	0.046

Power Output listed is the maximum combined conducted output power. Device is an 802.11n router in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antennas used for this transmitter must be installed to provide a separation distance of at least 28 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States

Date of Grant: 08/26/2009 Application Dated: 08/11/2009

Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	UZ7AP7131N
Name of Grantee:	Zebra Technologies Corporation
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	11n Access-Point
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0  -  5240.0	0.046

Power Output listed is the maximum combined conducted output power. Device is an 802.11n router in a 3x3 Spatial Multiplexing MIMO configuration as described in this filing. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antennas used for this transmitter must be installed to provide a separation distance of at least 28 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application C4RkTO7J0OLhVBdWFl385A==

EAS Grant - Application C4RkTO7J0OLhVBdWFl385A==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States

Date of Grant: 08/23/2013 Application Dated: 06/20/2013

Attention: Larry (Qianlin) Zhou , Regulatory Specialist

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	UZ7AP7131N
Name of Grantee:	Zebra Technologies Corporation
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	11n Access Point
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15E	5180.0  -  5240.0	0.046
	15E	5260.0  -  5320.0	0.045
	15E	5500.0  -  5580.0	0.044
	15E	5660.0  -  5700.0	0.044

Power listed is the maximum combined conducted output power. This device has 20 MHz and 40 MHz BW modes. End-users and responsible parties must be provided with operating and installation instructions to ensure RF exposure compliance. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 28 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

TCB Grant - Application 5HtUs0+A4JQryZYycGoufg==

EAS Grant - Application 5HtUs0+A4JQryZYycGoufg==

Mail To:

Michael Violette,

American Certification Body, Inc.

6731 Whittier Ave, Suite C110

McLean, VA 22101

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States

Date of Grant: 05/20/2010 Application Dated: 10/12/2009

Attention: Larry (Qianlin) Zhou , Regulatory Specialist

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	UZ7AP7131N
Name of Grantee:	Zebra Technologies Corporation
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	11n Access-Point
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0  -  5240.0	0.046
CC MO	15E	5260.0  -  5320.0	0.045
CC MO	15E	5500.0  -  5580.0	0.044
	15E	5660.0  -  5700.0	0.044

Output power is conducted. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To:

Eric Lin,

Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch

81-1 Luliaoken, 9th Lin, Wulung Tsuen Chiunglin

Hsinchu, 307

Taiwan