FCC ID UZ7CDR5G
802.11 an/ac radio module
by Zebra Technologies Corporation
Grantee Code: UZ7 Product Code: CDR5G
Latest application date: 2016-05-13
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2016-05-13 |
| 5180-5240 MHz | Original Equipment | 2016-02-10 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2016-07-31 | PDF 559.6 KB |
| Internal Photos | Internal Photos | 2016-07-31 | PDF 2.7 MB |
| External Photos | External Photos | 2016-07-31 | PDF 125.2 KB |
| Label Info | ID Label/Location Info | 2016-02-10 | PDF 25.1 KB |
| Test Setup Photos | Test Setup Photos | 2016-09-26 | PDF 427.6 KB |
| Test Setup Photos 3e Radio 2 Maste | Test Setup Photos | 2016-09-26 | PDF 57.2 KB |
| Test Setup Photos 3e Radio 2 Slave | Test Setup Photos | 2016-09-26 | PDF 95 KB |
| Test Setup Photos 3i Radio 2 Master | Test Setup Photos | 2016-09-26 | PDF 60.4 KB |
| Test Setup Photos 3i Radio 2 Slave | Test Setup Photos | 2016-09-26 | PDF 118.8 KB |
| Test Setup Photos | Test Setup Photos | 2016-07-31 | PDF 692.1 KB |
| Test Report Part 5 Metadata only | Test Setup Photos | 2016-02-10 | PDF 987.2 KB |
| DFS Test Report 3e Radio 2 Master | Test Report | 2016-05-13 | PDF 2.1 MB |
| DFS Test Report 3e Radio 2 Slave | Test Report | 2016-05-13 | PDF 478.3 KB |
| DFS Test Report 3i Radio 2 Master | Test Report | 2016-05-13 | PDF 2.1 MB |
| DFS Test Report 3i Radio 2 Slave | Test Report | 2016-05-13 | PDF 463 KB |
| Test Report part 1 of 11 | Test Report | 2016-05-13 | PDF 2.1 MB |
| Test Report part 10 of 11 | Test Report | 2016-05-13 | PDF 4.8 MB |
| Test Report part 11 of 11 | Test Report | 2016-05-13 | PDF 4.2 MB |
| Test Report part 2 of 11 | Test Report | 2016-05-13 | PDF 4.8 MB |
| Test Report part 3 of 11 | Test Report | 2016-05-13 | PDF 2.9 MB |
| Test Report part 4 of 11 | Test Report | 2016-05-13 | PDF 5 MB |
| Test Report part 5 of 11 | Test Report | 2016-05-13 | PDF 3.6 MB |
| Test Report part 6 of 11 | Test Report | 2016-05-13 | PDF 3.2 MB |
| Test Report part 7 of 11 | Test Report | 2016-05-13 | PDF 4.3 MB |
| Test Report part 8 of 11 | Test Report | 2016-05-13 | PDF 2 MB |
| Test Report part 9 of 11 | Test Report | 2016-05-13 | PDF 4 MB |
| Maximum E.I.R.P. at any elevation angle above 30 degrees Test Report | Test Report | 2016-02-10 | PDF 544 KB |
| Test Report Part 1 | Test Report | 2016-02-10 | PDF 2.7 MB |
| Test Report Part 2 | Test Report | 2016-02-10 | PDF 3.8 MB |
| Test Report Part 3 | Test Report | 2016-02-10 | PDF 3.6 MB |
| Test Report Part 4 | Test Report | 2016-02-10 | PDF 3.6 MB |
| Test Report Part 5 | Test Report | 2016-02-10 | PDF 987.2 KB |
| Test Report Part 6 | Test Report | 2016-02-10 | PDF 1.7 MB |
| Test Report Part 7 | Test Report | 2016-02-10 | PDF 4.7 MB |
| Test Report Part 8 | Test Report | 2016-02-10 | PDF 4.1 MB |
| Test Report Part 9 | Test Report | 2016-02-10 | PDF 34.3 KB |
| Cover Letter | Cover Letter(s) | 2016-05-13 | PDF 67 KB |
| Limited Modular Approval Letter | Cover Letter(s) | 2016-05-13 | PDF 26.9 KB |
| Confidentiality Letter | Cover Letter(s) | 2016-02-10 | PDF 62.9 KB |
| Modular Approval Letter | Cover Letter(s) | 2016-02-10 | PDF 26.4 KB |
| RF Exposure Info | RF Exposure Info | 2016-05-13 | PDF 210.5 KB |
| RF Exposure Info | RF Exposure Info | 2016-02-10 | PDF 163.8 KB |
| Block Diagram Metadata only | Block Diagram | PDF 21.1 KB | |
| Schematics Metadata only | Schematics | PDF 168.8 KB | |
| Operational Description Metadata only | Operational Description | PDF 142.6 KB | |
| Operational Description Antenna Specification part 1 Metadata only | Operational Description | PDF 5.3 MB | |
| Operational Description Antenna Specification part 2 Metadata only | Operational Description | PDF 1.6 MB | |
| Operational Description Software Security Metadata only | Operational Description | PDF 226.5 KB |
Application Information
| Application ID | WyYZYT4VlBrOkMB9RKjjVQ== |
|---|---|
| Final Action Date | 2016-05-13 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0015642663 |
| Model | CDR5G |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | 802.11 an/ac radio module |
| Responsible Party | Qianlin Zhou, Regulatory Specialist, Larry.Zhou@zebra.com  , 346-260-3543 |
| Test Firm | Sharon Jiang, SPORTON International Inc., sharonjiang@sporton.com.tw  , 886-3-656-9065 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 09/26/2016 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Limited Single Modular Approval. This device is to only be installed in the following hosts; brand: Zebra, models: AP-8533, AP-8533I, AP-8432I. Power listed is maximum combined conducted output power. Professional installation is required. This device is restricted to fixed and mobile use only. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 40 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80 MHz bandwidth modes. (Date of Grant: 02/10/2016) Class II Permissive Change: This Class II Permissive Change is to add the U-NII-2A and U-NII-2C bands. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| WyYZYT4VlBrOkMB9RKjjVQ== | 2016-05-13 | Class II permissive change or modification of presently authorized equipment |
| s41sy90KJkc91Nx4ju+6ZA== | 2016-02-10 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application WyYZYT4VlBrOkMB9RKjjVQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 05/13/2016 Application Dated: 03/30/2016 |
| Zebra Technologies Corporation |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7CDR5G |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 an/ac radio module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 MO | 15E | 5180.0 - 5240.0 | 0.45 | ||
| 38 MO | 15E | 5260.0 - 5320.0 | 0.25 | ||
| 38 MO | 15E | 5500.0 - 5720.0 | 0.25 | ||
| 38 MO | 15E | 5745.0 - 5825.0 | 0.441 |
| Limited Single Modular Approval. This device is to only be installed in the following hosts; brand: Zebra, models: AP-8533, AP-8533I, AP-8432I. Power listed is maximum combined conducted output power. Professional installation is required. This device is restricted to fixed and mobile use only. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 40 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80 MHz bandwidth modes. (Date of Grant: 02/10/2016) Class II Permissive Change: This Class II Permissive Change is to add the U-NII-2A and U-NII-2C bands. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application WyYZYT4VlBrOkMB9RKjjVQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 05/13/2016 Application Dated: 03/30/2016 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7CDR5G |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 an/ac radio module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 MO | 15E | 5180.0 - 5240.0 | 0.45 | ||
| 38 MO | 15E | 5260.0 - 5320.0 | 0.25 | ||
| 38 MO | 15E | 5500.0 - 5720.0 | 0.25 | ||
| 38 MO | 15E | 5745.0 - 5825.0 | 0.441 |
| Limited Single Modular Approval. This device is to only be installed in the following hosts; brand: Zebra, models: AP-8533, AP-8533I, AP-8432I. Power listed is maximum combined conducted output power. Professional installation is required. This device is restricted to fixed and mobile use only. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 40 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80 MHz bandwidth modes. (Date of Grant: 02/10/2016) Class II Permissive Change: This Class II Permissive Change is to add the U-NII-2A and U-NII-2C bands. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 02/10/2016 Application Dated: 02/01/2016 |
| Zebra Technologies Corporation |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7CDR5G |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 an/ac radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 MO | 15E | 5180.0 - 5240.0 | 0.45 | ||
| 38 MO | 15E | 5745.0 - 5825.0 | 0.441 |
| Single Modular Approval. Power listed is maximum combined conducted output power. Professional installation is required. This device is restricted to fixed and mobile use only. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 40 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80 MHz bandwidth modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application s41sy90KJkc91Nx4ju+6ZA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 02/10/2016 Application Dated: 02/01/2016 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7CDR5G |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 an/ac radio module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 MO | 15E | 5180.0 - 5240.0 | 0.45 | ||
| 38 MO | 15E | 5745.0 - 5825.0 | 0.441 |
| Single Modular Approval. Power listed is maximum combined conducted output power. Professional installation is required. This device is restricted to fixed and mobile use only. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 40 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80 MHz bandwidth modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |