FCC ID UZ7CDRDB
802.11 a/b/g/n/ac radio module
by Zebra Technologies Corporation
Grantee Code: UZ7 Product Code: CDRDB
Latest application date: 2016-05-17
FCC ID Device Details
| FCC ID | UZ7CDRDB |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | UZ7 |
| Product Code | CDRDB |
| Applicant Business | Zebra Technologies Corporation 🇺🇸 |
| Related Domains |  zebra.com  sporton.com.tw |
| Equipment Class | 802.11 a/b/g/n/ac radio module |
| Test Firm | SPORTON International Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2016-05-17 |
| 5180-5240 MHz | Original Equipment | 2016-02-25 |
| 2412-2462 MHz | Original Equipment | 2016-02-25 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual Metadata only | Users Manual | 2016-08-23 | PDF 506.8 KB |
| Users Manual | Users Manual | 2016-08-23 | PDF 560.2 KB |
| Internal Photos | Internal Photos | 2016-08-23 | PDF 2 MB |
| External Photos | External Photos | 2016-08-23 | PDF 100.4 KB |
| Label & Label Location | ID Label/Location Info | 2016-02-25 | PDF 25.3 KB |
| Test Setup Photos | Test Setup Photos | 2016-08-23 | PDF 350.3 KB |
| Test Setup Photos DFS | Test Setup Photos | 2016-08-23 | PDF 95.9 KB |
| Test Report for DFS-1 | Test Report | 2016-05-17 | PDF 3.2 MB |
| Test Report for DFS-2 | Test Report | 2016-05-17 | PDF 3.2 MB |
| Maximum EIRP at any elevation angle above 30 degrees | Test Report | 2016-02-25 | PDF 297.8 KB |
| Test Report DFS | Test Report | 2016-02-25 | PDF 475.4 KB |
| Test Report DTS | Test Report | 2016-02-25 | PDF 3.9 MB |
| Test Report NII Part 1 | Test Report | 2016-02-25 | PDF 4.9 MB |
| Test Report NII Part 2 | Test Report | 2016-02-25 | PDF 2 MB |
| Test Report NII Part 3 | Test Report | 2016-02-25 | PDF 2.4 MB |
| Class II permissive change letter for FCC | Cover Letter(s) | 2016-05-17 | PDF 84.3 KB |
| Confidentiality | Cover Letter(s) | 2016-05-17 | PDF 84.3 KB |
| Declaration of authorization | Cover Letter(s) | 2016-05-17 | PDF 84.3 KB |
| Limited module approval letter | Cover Letter(s) | 2016-05-17 | PDF 26.8 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2016-02-25 | PDF 65.1 KB |
| Confidentiality Requst Letter | Cover Letter(s) | 2016-02-25 | PDF 65.1 KB |
| Declaration Letter | Cover Letter(s) | 2016-02-25 | PDF 40.1 KB |
| Limited Modular Approval Letter | Cover Letter(s) | 2016-02-25 | PDF 27 KB |
| Modular Approval Letter Metadata only | Cover Letter(s) | 2016-02-25 | PDF 26.3 KB |
| Module Approval Letter Metadata only | Cover Letter(s) | 2016-02-25 | PDF 26.3 KB |
| Human Exposure | RF Exposure Info | 2016-02-25 | PDF 218.4 KB |
| Block Diagram Metadata only | Block Diagram | PDF 20.9 KB | |
| Schematics Metadata only | Schematics | PDF 90.4 KB | |
| Operational Description Metadata only | Operational Description | PDF 118.1 KB | |
| Operational Description Antenna Specification Metadata only | Operational Description | PDF 5.8 MB | |
| Operational Description Software Secuirty Metadata only | Operational Description | PDF 239.5 KB | |
| Software security Metadata only | Operational Description | PDF 410.4 KB |
Application Information
| Application ID | WkMWOfclsk5884YfU3nIeA== |
|---|---|
| Final Action Date | 2016-05-17 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0015642663 |
| Model | CDRDB |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | 802.11 a/b/g/n/ac radio module |
| Responsible Party | Qianlin Zhou, Regulatory Specialist, Larry.Zhou@zebra.com , 346-260-3543 |
| Agent | Leo Leo Leo, Sporton International Inc., leohuang@sporton.com.tw , 886-3-656-9065 |
| Technical Contact | Sharon Jiang, Sporton International Inc., sharonjiang@sporton.com.tw , 886-3-656-9065 |
| Non-Technical Contact | Sharon Jiang, Sporton International Inc., sharonjiang@sporton.com.tw , 886-3-656-9065 |
| Test Firm | Sharon Jiang, SPORTON International Inc., sharonjiang@sporton.com.tw , 886-3-656-9065 |
| TCB Email | certification@telefication.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | C2PC: Adding master mode for this device. Limited Single Modular Approval. Power listed is maximum combined conducted output power. Professional installation required. This device is restricted to fixed and mobile use only. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 40 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80 MHz bandwidth modes. This device is to only be installed in the following hosts; brand: Zebra, models: AP-8533, AP-8533I, AP-8432I |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| WkMWOfclsk5884YfU3nIeA== | 2016-05-17 | Class II permissive change or modification of presently authorized equipment |
| NE22TFAIHrl7Rg/HjnPa2A== | 2016-02-25 | Original Equipment |
| 7N47l4MQ8aXRYbGUtfkdYA== | 2016-02-25 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application WkMWOfclsk5884YfU3nIeA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 05/17/2016 Application Dated: 04/26/2016 |
| Zebra Technologies Corporation |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7CDRDB |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g/n/ac radio module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.19 | ||
| 38 CC MO | 15E | 5260.0 - 5320.0 | 0.155 | ||
| 38 CC MO | 15E | 5500.0 - 5720.0 | 0.174 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.192 |
| C2PC: Adding master mode for this device. Limited Single Modular Approval. Power listed is maximum combined conducted output power. Professional installation required. This device is restricted to fixed and mobile use only. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 40 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80 MHz bandwidth modes. This device is to only be installed in the following hosts; brand: Zebra, models: AP-8533, AP-8533I, AP-8432I |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application WkMWOfclsk5884YfU3nIeA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 05/17/2016 Application Dated: 04/26/2016 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7CDRDB |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g/n/ac radio module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.19 | ||
| 38 CC MO | 15E | 5260.0 - 5320.0 | 0.155 | ||
| 38 CC MO | 15E | 5500.0 - 5720.0 | 0.174 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.192 |
| C2PC: Adding master mode for this device. Limited Single Modular Approval. Power listed is maximum combined conducted output power. Professional installation required. This device is restricted to fixed and mobile use only. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 40 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80 MHz bandwidth modes. This device is to only be installed in the following hosts; brand: Zebra, models: AP-8533, AP-8533I, AP-8432I |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 02/25/2016 Application Dated: 02/05/2016 |
| Zebra Technologies Corporation |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7CDRDB |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g/n/ac radio module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.19 | ||
| 38 CC MO | 15E | 5260.0 - 5320.0 | 0.155 | ||
| 38 CC MO | 15E | 5500.0 - 5720.0 | 0.174 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.192 |
| Limited Single Modular Approval. Power listed is maximum combined conducted output power. Professional installation required. This device is restricted to fixed and mobile use only. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 40 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80 MHz bandwidth modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application NE22TFAIHrl7Rg/HjnPa2A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 02/25/2016 Application Dated: 02/05/2016 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7CDRDB |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g/n/ac radio module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.19 | ||
| 38 CC MO | 15E | 5260.0 - 5320.0 | 0.155 | ||
| 38 CC MO | 15E | 5500.0 - 5720.0 | 0.174 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.192 |
| Limited Single Modular Approval. Power listed is maximum combined conducted output power. Professional installation required. This device is restricted to fixed and mobile use only. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 40 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80 MHz bandwidth modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 02/25/2016 Application Dated: 02/05/2016 |
| Zebra Technologies Corporation |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7CDRDB |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b/g/n/ac radio module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.425 |
| Limited Single Modular Approval. Power listed is maximum combined conducted output power. Professional installation required. This device is restricted to fixed and mobile use only. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 40 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 7N47l4MQ8aXRYbGUtfkdYA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 02/25/2016 Application Dated: 02/05/2016 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7CDRDB |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b/g/n/ac radio module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.425 |
| Limited Single Modular Approval. Power listed is maximum combined conducted output power. Professional installation required. This device is restricted to fixed and mobile use only. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 40 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |