FCC ID UZ7FX7500
RFID Reader
by Zebra Technologies Corporation
Grantee Code: UZ7 Product Code: FX7500
Latest application date: 2024-07-18
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.75-927.25 MHz | Class II permissive change or modification of presently authorized equipment | 2024-07-18 |
| 902.75-927.25 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-03 |
| 903.1-926.95 MHz | Class II permissive change or modification of presently authorized equipment | 2018-09-25 |
| 902.75-927.25 MHz | Class II permissive change or modification of presently authorized equipment | 2016-07-08 |
| 902.75-927.25 MHz | Original Equipment | 2013-11-12 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| FX7500_User Manual | Users Manual | 2025-01-14 | PDF 844.7 KB |
| Integrator Guide | Users Manual | 2017-01-04 | PDF 5.5 MB |
| User Manual | Users Manual | 2017-01-04 | PDF 1.4 MB |
| Installer Guide part 1 | Users Manual | 2013-11-12 | PDF 2.3 MB |
| Installer Guide part 2 | Users Manual | 2013-11-12 | PDF 5.3 MB |
| Installer Guide part 3 | Users Manual | 2013-11-12 | PDF 4.8 MB |
| Quick Start Guide | Users Manual | 2013-11-12 | PDF 901.3 KB |
| IntPho (FCC | Internal Photos | 2024-07-01 | PDF 4.7 MB |
| Internal Photos | Internal Photos | 2013-11-12 | PDF 303.9 KB |
| FX7500_External Photo_r1 | External Photos | 2025-01-14 | PDF 298.7 KB |
| ExtPho (FCC | External Photos | 2024-07-01 | PDF 1.7 MB |
| External Photos | External Photos | 2017-01-04 | PDF 298.7 KB |
| External Photos | External Photos | 2013-11-12 | PDF 1.3 MB |
| Label | ID Label/Location Info | 2013-11-12 | PDF 297.8 KB |
| Label 2 | ID Label/Location Info | 2013-11-12 | PDF 98.8 KB |
| Label location | ID Label/Location Info | 2013-11-12 | PDF 201.4 KB |
| FX7500_Antenna Setup Photo | Test Setup Photos | 2025-01-14 | PDF 138.7 KB |
| UZ7FX7500_Tsup_DSS_UHF RFID | Test Setup Photos | 2025-01-14 | PDF 174.7 KB |
| FX7500_Report_RF_US_Part15C_UHF RFID (photo) | Test Setup Photos | 2024-07-01 | PDF 417.1 KB |
| Test Setup Photos | Test Setup Photos | 2019-03-24 | PDF 254 KB |
| Test Setup Photos | Test Setup Photos | 2017-01-04 | PDF 300.7 KB |
| Test Photos | Test Setup Photos | 2013-11-12 | PDF 444.7 KB |
| FX7500_Antenna Datasheet | Test Report | 2024-07-18 | PDF 431 KB |
| UZ7FX7500_TR_DSS_UHF RFID | Test Report | 2024-07-18 | PDF 931.4 KB |
| AN480 RFID Antenna - Zebra | Test Report | 2024-01-03 | PDF 472.2 KB |
| FX7500_Report_RF_US_Part15C_UHF RFID_r1 | Test Report | 2024-01-03 | PDF 2.1 MB |
| Test Report | Test Report | 2018-09-25 | PDF 784.5 KB |
| Test Report | Test Report | 2016-07-08 | PDF 2 MB |
| Test Report | Test Report | 2013-11-12 | PDF 1.5 MB |
| UZ7FX7500_Attestation_Covered List 2.911(d)(5)(i) | Attestation Statements | 2024-07-18 | PDF 822.4 KB |
| UZ7FX7500_Attestation_Covered List 2.911(d)(5)(ii) | Attestation Statements | 2024-07-18 | PDF 822.4 KB |
| UZ7_Attestation_US agent letter_2.911d7 | Attestation Statements | 2024-07-18 | PDF 456.2 KB |
| Attestation Statements US agent_UZ7_2.911d7 | Attestation Statements | 2024-01-03 | PDF 734.6 KB |
| UZ7FX7500_Attestation_Covered List_2.911d5(i) | Attestation Statements | 2024-01-03 | PDF 437.7 KB |
| UZ7FX7500_Attestation_Covered List_2.911d5(ii) | Attestation Statements | 2024-01-03 | PDF 437.7 KB |
| Description of Change, POA, DoC, Confidentiality Request Metadata only | Attestation Statements | 2018-09-25 | PDF 56.1 KB |
| Attestation Letter Metadata only | Attestation Statements | 2016-07-08 | PDF 79.6 KB |
| Attestation Letter | Cover Letter(s) | 2016-07-08 | PDF 79.6 KB |
| UZ7FX7500_Coverletter-FCC | Cover Letter(s) | 2024-07-18 | PDF 459.7 KB |
| UZ7FX7500_cvrltr_Class II Permissive Change | Cover Letter(s) | 2024-07-18 | PDF 708.3 KB |
| UZ7FX7500_C2PCPX letter_r1 | Cover Letter(s) | 2024-01-03 | PDF 896.6 KB |
| UZ7FX7500_Coverletter-FCC_r1 | Cover Letter(s) | 2024-01-03 | PDF 470.8 KB |
| Description of Change, POA, DoC, Confidentiality Request | Cover Letter(s) | 2018-09-25 | PDF 56.1 KB |
| Agent | Cover Letter(s) | 2013-11-12 | PDF 116.6 KB |
| Confidentiality | Cover Letter(s) | 2013-11-12 | PDF 114.5 KB |
| UZ7FX7500_FCC RF Exposure | RF Exposure Info | 2024-07-18 | PDF 313.8 KB |
| FX7500_Reprot_RF Exposure_US | RF Exposure Info | 2024-01-03 | PDF 324.1 KB |
| MPE Report | RF Exposure Info | 2018-09-25 | PDF 197.1 KB |
| RF Exposure | RF Exposure Info | 2016-07-08 | PDF 269.3 KB |
| MPE Report | RF Exposure Info | 2013-11-12 | PDF 230.3 KB |
| FX7500 Block Diagram Metadata only | Block Diagram | PDF 685.3 KB | |
| sd-002067-01_09 (Schem) Metadata only | Schematics | PDF 373.1 KB | |
| C2PC TCB statement on PAG applicability Metadata only | Operational Description | PDF 90.1 KB | |
| FX7500 Operational Description Metadata only | Operational Description | PDF 140.2 KB | |
| UZ7FX7500 C2PCPX change note_2023-08 Metadata only | Operational Description | PDF 4.1 MB | |
| 2067-01_10_EC-67864_BOM Metadata only | Parts List/Tune Up Info | PDF 160.8 KB | |
| FX7500_Tune-up Procedure Metadata only | Parts List/Tune Up Info | PDF 11.9 KB | |
| PA-002067-01_BOM Metadata only | Parts List/Tune Up Info | PDF 285.9 KB |
Application Information
| Application ID | iVHjkrgtyqfiLU1VWESwVw== |
|---|---|
| Final Action Date | 2024-07-18 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0015642663 |
| Model | FX7500 |
| Frequency Range | 902.75-927.25 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | RFID Reader |
| Responsible Party | Qianlin Zhou, Regulatory Specialist, Larry.Zhou@zebra.com  , 346-260-3543 |
| Agent | Helen Helen Helen, Sporton International Inc., HelenHsiao@sporton.com.tw  , 886-3-327-3456 |
| Test Firm | Alex Chen, SPORTON International Inc., alex@sporton.com.tw , 886-3-327-3456 |
| TCB Email | QA65@sporton-usa.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 01/14/2025 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 34 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change: Use the non-pin-to-pin compatible RFID ASIC chip to replace the RFID Skyworks demodulator chip. Only the antenna model AN480 has been assessed and valid to this change. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 37 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change: evaluating new antenna |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| iVHjkrgtyqfiLU1VWESwVw== | 2024-07-18 | Class II permissive change or modification of presently authorized equipment |
| sriv6VONSO+dSXpKt2Q/7A== | 2024-01-03 | Class II permissive change or modification of presently authorized equipment |
| m8NVpVIEHKotCScox3AbOQ== | 2018-09-25 | Class II permissive change or modification of presently authorized equipment |
| shP1MwpWhmZrLMpO4q0NbQ== | 2016-07-08 | Class II permissive change or modification of presently authorized equipment |
| 8lOTsSStiaz0eo0PNJYekQ== | 2013-11-12 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application sriv6VONSO+dSXpKt2Q/7A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Sporton International (USA) Inc. 1175 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 01/03/2024 Application Dated: 12/21/2023 |
| Zebra Technologies Corporation |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7FX7500 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Reader |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 1.0 |
| Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 34 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change: Use the non-pin-to-pin compatible RFID ASIC chip to replace the RFID Skyworks demodulator chip. Only the antenna model AN480 has been assessed and valid to this change. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 37 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application sriv6VONSO+dSXpKt2Q/7A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 01/03/2024 Application Dated: 12/21/2023 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7FX7500 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Reader |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 1.0 |
| Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 34 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change: Use the non-pin-to-pin compatible RFID ASIC chip to replace the RFID Skyworks demodulator chip. Only the antenna model AN480 has been assessed and valid to this change. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 37 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 07/08/2016 Application Dated: 07/07/2016 |
| Zebra Technologies Corporation |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7FX7500 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | FX7500 RFID FIXED READER |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 1.0 |
| Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 34 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application shP1MwpWhmZrLMpO4q0NbQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 07/08/2016 Application Dated: 07/07/2016 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7FX7500 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | FX7500 RFID FIXED READER |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 1.0 |
| Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 34 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 09/25/2018 Application Dated: 09/23/2018 |
| Zebra Technologies Corporation |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7FX7500 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | FX7500 RFID FIXED READER |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 903.1 - 926.95 | 1.0 |
| Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 34 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application m8NVpVIEHKotCScox3AbOQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 09/25/2018 Application Dated: 09/23/2018 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7FX7500 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | FX7500 RFID FIXED READER |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 903.1 - 926.95 | 1.0 |
| Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 34 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Sporton International (USA) Inc. 1175 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 07/18/2024 Application Dated: 07/17/2024 |
| Zebra Technologies Corporation |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7FX7500 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Reader |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 1.0 |
| Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 34 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change: Use the non-pin-to-pin compatible RFID ASIC chip to replace the RFID Skyworks demodulator chip. Only the antenna model AN480 has been assessed and valid to this change. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 37 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change: evaluating new antenna |
EAS Grant - Application iVHjkrgtyqfiLU1VWESwVw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 07/18/2024 Application Dated: 07/17/2024 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7FX7500 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RFID Reader |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 1.0 |
| Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 34 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change: Use the non-pin-to-pin compatible RFID ASIC chip to replace the RFID Skyworks demodulator chip. Only the antenna model AN480 has been assessed and valid to this change. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 37 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change: evaluating new antenna |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 11/12/2013 Application Dated: 11/12/2013 |
| Zebra Technologies Corporation |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Mark Luksich , DMTS, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7FX7500 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | FX7500 RFID Fixed Reader |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 1.0 |
| Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application 8lOTsSStiaz0eo0PNJYekQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 11/12/2013 Application Dated: 11/12/2013 |
| Attention: Mark Luksich , DMTS, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7FX7500 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | FX7500 RFID Fixed Reader |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 1.0 |
| Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |