FCC ID UZ7FXR9001
Industrial Fixed RFID Reader
by Zebra Technologies Corporation
Grantee Code: UZ7 Product Code: FXR9001
Latest application date: 2023-12-05
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Original Equipment | 2023-12-05 |
| 2402-2480 MHz | Original Equipment | 2023-12-05 |
| 902.75-927.25 MHz | Original Equipment | 2023-12-05 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2024-06-02 | PDF 1.2 MB |
| Internal Photos 1 | Internal Photos | 2024-06-02 | PDF 5.3 MB |
| Internal Photos 10 | Internal Photos | 2024-06-02 | PDF 5.4 MB |
| Internal Photos 11 | Internal Photos | 2024-06-02 | PDF 5.4 MB |
| Internal Photos 12 | Internal Photos | 2024-06-02 | PDF 661 KB |
| Internal Photos 2 | Internal Photos | 2024-06-02 | PDF 5.4 MB |
| Internal Photos 3 | Internal Photos | 2024-06-02 | PDF 5.4 MB |
| Internal Photos 4 | Internal Photos | 2024-06-02 | PDF 5.4 MB |
| Internal Photos 5 | Internal Photos | 2024-06-02 | PDF 5.5 MB |
| Internal Photos 6 | Internal Photos | 2024-06-02 | PDF 5.4 MB |
| Internal Photos 7 | Internal Photos | 2024-06-02 | PDF 5.4 MB |
| Internal Photos 8 | Internal Photos | 2024-06-02 | PDF 5.4 MB |
| Internal Photos 9 | Internal Photos | 2024-06-02 | PDF 5.4 MB |
| External Photos 1 | External Photos | 2024-06-02 | PDF 5.4 MB |
| External Photos 2 | External Photos | 2024-06-02 | PDF 5.3 MB |
| External Photos 3 | External Photos | 2024-06-02 | PDF 2.6 MB |
| Label Location | ID Label/Location Info | 2023-12-05 | PDF 193.6 KB |
| Label Sample | ID Label/Location Info | 2023-12-05 | PDF 64.8 KB |
| TSUP DSS BT | Test Setup Photos | 2024-06-02 | PDF 746.7 KB |
| TSUP DSS RFID | Test Setup Photos | 2024-06-02 | PDF 949.9 KB |
| TSUP DTS_BLE | Test Setup Photos | 2024-06-02 | PDF 709.4 KB |
| TSUP DTS_WLAN 2.4G | Test Setup Photos | 2024-06-02 | PDF 1.4 MB |
| TSUP NII DFS | Test Setup Photos | 2024-06-02 | PDF 264.5 KB |
| TSUP NII WLAN 5G | Test Setup Photos | 2024-06-02 | PDF 871.5 KB |
| TSUP NII WLAN 5G B1-3 | Test Setup Photos | 2024-06-02 | PDF 1.4 MB |
| TSUP_RFID Internal Antenna | Test Setup Photos | 2024-06-02 | PDF 252.7 KB |
| TSUP_Wi-Fi Internal Antenna | Test Setup Photos | 2024-06-02 | PDF 535.1 KB |
| Wi-Fi External Antenna_ST0228-30-502-A | Test Setup Photos | 2024-06-02 | PDF 339.1 KB |
| Wi-Fi External Antenna_ZB511A-02-001-C | Test Setup Photos | 2024-06-02 | PDF 358.7 KB |
| Antenna RFID External | Test Report | 2023-12-05 | PDF 2 MB |
| Antenna RFID Internal Metadata only | Test Report | 2023-12-05 | PDF 373.1 KB |
| RFID EXternal Antenna | Test Report | 2023-12-05 | PDF 2 MB |
| RFID External Antenna | Test Report | 2023-12-05 | PDF 2 MB |
| RFID Internal Antenna | Test Report | 2023-12-05 | PDF 197.5 KB |
| RFID Internal Antenna | Test Report | 2023-12-05 | PDF 373.1 KB |
| Test Report DSS BT | Test Report | 2023-12-05 | PDF 4.5 MB |
| Test Report DSS UHF RFID | Test Report | 2023-12-05 | PDF 3.1 MB |
| Test Report DTS 2.4G 1 | Test Report | 2023-12-05 | PDF 5.3 MB |
| Test Report DTS 2.4G 2 | Test Report | 2023-12-05 | PDF 5.3 MB |
| Test Report DTS 2.4G 3 | Test Report | 2023-12-05 | PDF 1 MB |
| Test Report DTS BLE | Test Report | 2023-12-05 | PDF 4.5 MB |
| Test Report NII DFS | Test Report | 2023-12-05 | PDF 730.8 KB |
| Test Report NII WLAN 5G B1-3 1 | Test Report | 2023-12-05 | PDF 5.3 MB |
| Test Report NII WLAN 5G B1-3 2 | Test Report | 2023-12-05 | PDF 5.4 MB |
| Test Report NII WLAN 5G B1-3 3 | Test Report | 2023-12-05 | PDF 5.2 MB |
| Test Report NII WLAN 5G B4 1 | Test Report | 2023-12-05 | PDF 5.3 MB |
| Test Report NII WLAN 5G B4 2 | Test Report | 2023-12-05 | PDF 724.9 KB |
| Wi-Fi External Antenna_ST0228-30-502-A | Test Report | 2023-12-05 | PDF 3.8 MB |
| Wi-Fi External Antenna_ZB511A-02-001-C | Test Report | 2023-12-05 | PDF 5 MB |
| Wi-Fi Internal Antenna | Test Report | 2023-12-05 | PDF 867.5 KB |
| Wifi External Antenna ST0228 Metadata only | Test Report | 2023-12-05 | PDF 4 MB |
| Wifi External Antenna ZB511A Metadata only | Test Report | 2023-12-05 | PDF 5.1 MB |
| Wifi Internal Antenna Metadata only | Test Report | 2023-12-05 | PDF 970.7 KB |
| Attestation Statements Part 2.911(d)(7) | Attestation Statements | 2023-12-05 | PDF 734.2 KB |
| Attstn Stmt Part 2.911(d)(5)(i)&(ii) | Attestation Statements | 2023-12-05 | PDF 825.1 KB |
| Agent Authorization Letter | Cover Letter(s) | 2023-12-05 | PDF 463.2 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2023-12-05 | PDF 463.2 KB |
| RF Exposure Evaluation | RF Exposure Info | 2023-12-05 | PDF 400.3 KB |
| Block Diagram Metadata only | Block Diagram | PDF 263.8 KB | |
| Schematics Carrier Board Metadata only | Schematics | PDF 2 MB | |
| Schematics Lite Board Metadata only | Schematics | PDF 779.8 KB | |
| Operational Description Metadata only | Operational Description | PDF 377.6 KB | |
| Software Security Operational Description Metadata only | SDR Software/Security Inf | PDF 437.6 KB | |
| Parts List 4 Port Metadata only | Parts List/Tune Up Info | PDF 361.9 KB | |
| Parts List 4+1 Port Metadata only | Parts List/Tune Up Info | PDF 365.9 KB | |
| Parts List 8 Port Metadata only | Parts List/Tune Up Info | PDF 370.4 KB | |
| Parts List CPU Lite Metadata only | Parts List/Tune Up Info | PDF 256.4 KB | |
| Tune Procedure Metadata only | Parts List/Tune Up Info | PDF 313.3 KB |
Application Information
| Application ID | qOhB4Un+Z+fuojL79ClHhA== |
|---|---|
| Final Action Date | 2023-12-05 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0015642663 |
| Model | FXR9001 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Industrial Fixed RFID Reader |
| Responsible Party | Qianlin Zhou, Regulatory Specialist, Larry.Zhou@zebra.com  , 346-260-3543 |
| Test Firm | Alex Chen, Sporton International Inc., alex@sporton.com.tw  , 88633273456 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 06/02/2024 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output Power listed is the maximum combined conducted output power. Professional Installation is required. The antenna(s) used for this transmitter must be installed and operated so as to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. End-users must be informed of operating requirements for satisfying RF exposure compliance. This device supports 20, 40 and 80 MHz bandwidth modes. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| qOhB4Un+Z+fuojL79ClHhA== | 2023-12-05 | Original Equipment |
| nh3gzwoVxA5thKayAN8New== | 2023-12-05 | Original Equipment |
| E77AL8xptl28bx8+rOgBVg== | 2023-12-05 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application qOhB4Un+Z+fuojL79ClHhA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 12/05/2023 Application Dated: 12/01/2023 |
| Zebra Technologies Corporation |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7FXR9001 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Industrial Fixed RFID Reader |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0396 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.0391 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.0382 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.0389 |
| Output Power listed is the maximum combined conducted output power. Professional Installation is required. The antenna(s) used for this transmitter must be installed and operated so as to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. End-users must be informed of operating requirements for satisfying RF exposure compliance. This device supports 20, 40 and 80 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application qOhB4Un+Z+fuojL79ClHhA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 12/05/2023 Application Dated: 12/01/2023 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7FXR9001 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Industrial Fixed RFID Reader |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0396 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.0391 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.0382 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.0389 |
| Output Power listed is the maximum combined conducted output power. Professional Installation is required. The antenna(s) used for this transmitter must be installed and operated so as to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. End-users must be informed of operating requirements for satisfying RF exposure compliance. This device supports 20, 40 and 80 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 12/05/2023 Application Dated: 12/01/2023 |
| Zebra Technologies Corporation |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7FXR9001 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Industrial Fixed RFID Reader |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0068 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.0424 |
| Output Power listed is the maximum combined conducted output power. Professional Installation is required. The antenna(s) used for this transmitter must be installed and operated so as to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. End-users must be informed of operating requirements for satisfying RF exposure compliance. This device supports 20 and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application nh3gzwoVxA5thKayAN8New==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 12/05/2023 Application Dated: 12/01/2023 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7FXR9001 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Industrial Fixed RFID Reader |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0068 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.0424 |
| Output Power listed is the maximum combined conducted output power. Professional Installation is required. The antenna(s) used for this transmitter must be installed and operated so as to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. End-users must be informed of operating requirements for satisfying RF exposure compliance. This device supports 20 and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 12/05/2023 Application Dated: 12/01/2023 |
| Zebra Technologies Corporation |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7FXR9001 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Industrial Fixed RFID Reader |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 902.75 - 927.25 | 0.7925 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.111 |
| Output Power listed is the maximum combined conducted output power. Professional Installation is required. The antenna(s) used for this transmitter must be installed and operated so as to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. End-users must be informed of operating requirements for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application E77AL8xptl28bx8+rOgBVg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 12/05/2023 Application Dated: 12/01/2023 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7FXR9001 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Industrial Fixed RFID Reader |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 902.75 - 927.25 | 0.7925 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.111 |
| Output Power listed is the maximum combined conducted output power. Professional Installation is required. The antenna(s) used for this transmitter must be installed and operated so as to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. End-users must be informed of operating requirements for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |