FCC ID UZ7KHAP800
802.11 a/b/g/n Module
by Zebra Technologies Corporation
Grantee Code: UZ7 Product Code: KHAP800
Latest application date: 2016-06-01
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2016-06-01 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2016-06-01 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2014-11-26 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2014-11-26 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2013-12-04 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2013-12-03 |
| 5260-5320 MHz | Class II permissive change or modification of presently authorized equipment | 2013-02-20 |
| 5180-5240 MHz | Original Equipment | 2012-06-29 |
| 2412-2462 MHz | Original Equipment | 2012-06-29 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2013-02-20 | PDF 292.6 KB |
| Users Manual Rev | Users Manual | 2012-06-29 | PDF 290.7 KB |
| Internal Photo | Internal Photos | 2013-02-20 | PDF 501.8 KB |
| Internal Photos Revised | Internal Photos | 2012-06-29 | PDF 500.8 KB |
| Antenna Photos | External Photos | 2014-11-26 | PDF 453 KB |
| antenna photo | External Photos | 2013-12-04 | PDF 352.8 KB |
| Antenna Photo | External Photos | 2013-12-03 | PDF 352.8 KB |
| External Photo | External Photos | 2013-02-20 | PDF 113 KB |
| External Photos Revised | External Photos | 2012-06-29 | PDF 112.6 KB |
| Label location | ID Label/Location Info | 2013-02-20 | PDF 69.1 KB |
| Label Info | ID Label/Location Info | 2012-06-29 | PDF 69.1 KB |
| Test Setup Photos | Test Setup Photos | 2014-11-26 | PDF 248.9 KB |
| Test Setup Photos | Test Setup Photos | 2014-11-26 | PDF 404.1 KB |
| setup photo_DFS | Test Setup Photos | 2013-12-04 | PDF 182.9 KB |
| setup photo_RF | Test Setup Photos | 2013-12-04 | PDF 293.9 KB |
| test setup photo | Test Setup Photos | 2013-12-03 | PDF 293.9 KB |
| Master DFS Test Photo | Test Setup Photos | 2013-02-20 | PDF 183.5 KB |
| RF TEST PHOTOS | Test Setup Photos | 2013-02-20 | PDF 927.3 KB |
| DTS Test Photos Rev | Test Setup Photos | 2012-06-29 | PDF 1.3 MB |
| NII Test Photos Rev | Test Setup Photos | 2012-06-29 | PDF 927.1 KB |
| NII Test Report part 1 Rev | Test Setup Photos | 2012-06-29 | PDF 4.5 MB |
| Test Report 1 | Test Report | 2014-11-26 | PDF 2.7 MB |
| Test Report 1 | Test Report | 2014-11-26 | PDF 3.2 MB |
| Test Report 2 | Test Report | 2014-11-26 | PDF 4 MB |
| Test Report 2 | Test Report | 2014-11-26 | PDF 5.3 MB |
| DFS Test Report | Test Report | 2013-12-04 | PDF 1.5 MB |
| NII test report | Test Report | 2013-12-04 | PDF 4 MB |
| DTS Test Report_part 1 | Test Report | 2013-12-03 | PDF 3.5 MB |
| DTS Test Report_part 2 | Test Report | 2013-12-03 | PDF 3.3 MB |
| Co-location Report | Test Report | 2013-02-20 | PDF 138.5 KB |
| FCC Master DFS Report | Test Report | 2013-02-20 | PDF 1.6 MB |
| FCC RF Report Part 1 | Test Report | 2013-02-20 | PDF 4.9 MB |
| FCC RF Report Part 2 | Test Report | 2013-02-20 | PDF 3.8 MB |
| FCC RF Report Part 3 | Test Report | 2013-02-20 | PDF 4 MB |
| FCC RF Report Part 4 | Test Report | 2013-02-20 | PDF 5.6 MB |
| FCC Slave DFS Report | Test Report | 2013-02-20 | PDF 840.8 KB |
| Co Location Testing | Test Report | 2012-06-29 | PDF 290.7 KB |
| DTS Test Report Part 1 Rev | Test Report | 2012-06-29 | PDF 4.6 MB |
| DTS Test Report Part 2 Rev | Test Report | 2012-06-29 | PDF 4.2 MB |
| DTS Test Report Part 3 Rev | Test Report | 2012-06-29 | PDF 4.7 MB |
| DTS Test Report Part 4 Rev | Test Report | 2012-06-29 | PDF 4.6 MB |
| DTS Test Report Part 5 Rev | Test Report | 2012-06-29 | PDF 4.2 MB |
| DTS Test Report Part 6 Rev | Test Report | 2012-06-29 | PDF 2.9 MB |
| DTS Test Report Part 7 Rev | Test Report | 2012-06-29 | PDF 2.6 MB |
| NII Test Report part 2 Rev | Test Report | 2012-06-29 | PDF 4.6 MB |
| FCC Attestations and Requests | Cover Letter(s) | 2013-02-20 | PDF 80.5 KB |
| FCC DoC letter for 4.9GHz band | Attestation Statements | 2013-02-20 | PDF 47.9 KB |
| Confidentiality Letter and Attestations | Cover Letter(s) | 2012-06-29 | PDF 81.7 KB |
| Professional Install Attestation | Attestation Statements | 2012-06-29 | PDF 87.1 KB |
| Cover Letter | Cover Letter(s) | 2016-06-01 | PDF 77.7 KB |
| Cover Letters | Cover Letter(s) | 2014-11-26 | PDF 67.5 KB |
| Authorization Letter | Cover Letter(s) | 2013-12-04 | PDF 132.2 KB |
| FCC Professional Decloration Letter | Cover Letter(s) | 2013-02-20 | PDF 92.6 KB |
| Module Approval Request Letter | Cover Letter(s) | 2013-02-20 | PDF 35.4 KB |
| Modular Approval Letter Rev 03 | Cover Letter(s) | 2012-06-29 | PDF 17.4 KB |
| MPE | RF Exposure Info | 2014-11-26 | PDF 279.2 KB |
| RF Expousre | RF Exposure Info | 2013-12-04 | PDF 147.5 KB |
| RF Exposure | RF Exposure Info | 2013-12-03 | PDF 147.5 KB |
| MPE Report | RF Exposure Info | 2013-02-20 | PDF 106.6 KB |
| RF Exposure Info | RF Exposure Info | 2012-06-29 | PDF 118 KB |
| Operational Description Metadata only | Operational Description | PDF 267.6 KB | |
| Operational Description Software Security Metadata only | Operational Description | PDF 405.3 KB |
Application Information
| Application ID | wGxQOH/l5PCGM+SqjjVhYQ== |
|---|---|
| Final Action Date | 2016-06-01 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0015642663 |
| Model | KHAP800 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.11 a/b/g/n Module |
| Responsible Party | Qianlin Zhou, Regulatory Specialist, Larry.Zhou@zebra.com  , 346-260-3543 |
| Test Firm | Sharon Jiang, SPORTON International Inc., sharonjiang@sporton.com.tw  , 886-3-656-9065 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is conducted. Modular approval. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 35 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| wGxQOH/l5PCGM+SqjjVhYQ== | 2016-06-01 | Class II permissive change or modification of presently authorized equipment |
| qUdDxKoEuyJ3cosg8Sfp7A== | 2016-06-01 | Class II permissive change or modification of presently authorized equipment |
| u2a6wYzGipOoUONbGao2HA== | 2014-11-26 | Class II permissive change or modification of presently authorized equipment |
| NMSrwSbhzZH6kK4fcxOY0A== | 2014-11-26 | Class II permissive change or modification of presently authorized equipment |
| +9NWxUSJkrXvRvmi5x9SCg== | 2013-12-04 | Class II permissive change or modification of presently authorized equipment |
| 2TiIxBX+Gz4+RIbgPOCO2Q== | 2013-12-03 | Class II permissive change or modification of presently authorized equipment |
| KcWmSxRbYzHKcx653HpnCA== | 2013-02-20 | Class II permissive change or modification of presently authorized equipment |
| c8EapyFz82gqMAagEMQKrA== | 2012-06-29 | Original Equipment |
| Lm2td0FFKqhVYxw8uL+GJw== | 2012-06-29 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2412-2462 MHz | 0.9594 | 15C | 36, CC, MO |
| 2412-2462 MHz | 0.9594000 | 15C | CC, MO |
| 5180-5240 MHz | 0.05 | 15E | 36, 48, CC, MO |
| 5180-5240 MHz | 0.05 | 15E | CC, MO |
| 5180-5240 MHz | 0.0500000 | 15E | 36, CC, MO |
| 5260-5320 MHz | 0.2455 | 15E | CC, MO |
| 5260-5320 MHz | 0.2455 | 15E | CC, MO, ND |
| 5270-5310 MHz | 0.2472 | 15E | CC, MO |
| 5270-5310 MHz | 0.2472 | 15E | CC, MO, ND |
| 5500-5580 MHz | 0.2489 | 15E | CC, MO |
| 5500-5580 MHz | 0.2489 | 15E | CC, MO, ND |
| 5660-5700 MHz | 0.2506 | 15E | CC, MO |
| 5660-5700 MHz | 0.2506 | 15E | CC, MO, ND |
| 5745-5825 MHz | 0.2582 | 15C | 36, CC, MO |
| 5745-5825 MHz | 0.2582 | 15E | 36, 48, CC, MO |
Grants
TCB Grant - Application wGxQOH/l5PCGM+SqjjVhYQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 06/01/2016 Application Dated: 05/31/2016 |
| Zebra Technologies Corporation |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7KHAP800 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b/g/n Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.9594 |
| Power Output listed is conducted. Modular approval. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 35 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application wGxQOH/l5PCGM+SqjjVhYQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 06/01/2016 Application Dated: 05/31/2016 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7KHAP800 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b/g/n Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.9594 |
| Power Output listed is conducted. Modular approval. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 35 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 11/26/2014 Application Dated: 11/26/2014 |
| Zebra Technologies Corporation |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7KHAP800 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g/n Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.05 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.2455 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.2472 | ||
| CC MO ND | 15E | 5500.0 - 5580.0 | 0.2489 | ||
| CC MO ND | 15E | 5660.0 - 5700.0 | 0.2506 |
| Output power is conducted. This device is restricted to indoor use for select antennas as described in this filing. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 35 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application u2a6wYzGipOoUONbGao2HA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 11/26/2014 Application Dated: 11/26/2014 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7KHAP800 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g/n Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.05 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.2455 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.2472 | ||
| CC MO ND | 15E | 5500.0 - 5580.0 | 0.2489 | ||
| CC MO ND | 15E | 5660.0 - 5700.0 | 0.2506 |
| Output power is conducted. This device is restricted to indoor use for select antennas as described in this filing. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 35 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 06/01/2016 Application Dated: 05/31/2016 |
| Zebra Technologies Corporation |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7KHAP800 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g/n Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 48 CC MO | 15E | 5180.0 - 5240.0 | 0.05 | ||
| 36 48 CC MO | 15E | 5745.0 - 5825.0 | 0.2582 |
| Output power is conducted. This device is restricted to indoor use for select antennas as described in this filing. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 35 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 and 40 MHz bandwidth modes. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| 48: | The device has been approved under § 15.407(b)(4)(ii) for antenna gains greater than 10 dBi and cannot be manufactured, marketed, sold or imported after March 2, 2018. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application qUdDxKoEuyJ3cosg8Sfp7A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 06/01/2016 Application Dated: 05/31/2016 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7KHAP800 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g/n Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 48 CC MO | 15E | 5180.0 - 5240.0 | 0.05 | ||
| 36 48 CC MO | 15E | 5745.0 - 5825.0 | 0.2582 |
| Output power is conducted. This device is restricted to indoor use for select antennas as described in this filing. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 35 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 and 40 MHz bandwidth modes. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| 48: | The device has been approved under § 15.407(b)(4)(ii) for antenna gains greater than 10 dBi and cannot be manufactured, marketed, sold or imported after March 2, 2018. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 11/26/2014 Application Dated: 11/26/2014 |
| Zebra Technologies Corporation |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7KHAP800 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b/g/n Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC MO | 15C | 2412.0 - 2462.0 | 0.9594 | ||
| 36 CC MO | 15C | 5745.0 - 5825.0 | 0.2582 |
| Power Output listed is conducted. Modular approval. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 35 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application NMSrwSbhzZH6kK4fcxOY0A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 11/26/2014 Application Dated: 11/26/2014 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7KHAP800 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b/g/n Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC MO | 15C | 2412.0 - 2462.0 | 0.9594 | ||
| 36 CC MO | 15C | 5745.0 - 5825.0 | 0.2582 |
| Power Output listed is conducted. Modular approval. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 35 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 06/29/2012 Application Dated: 06/29/2012 |
| Zebra Technologies Corporation |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Mark Luksich , DMTS, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7KHAP800 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b/g/n AP TX |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC MO | 15C | 2412.0 - 2462.0 | 0.9594 | ||
| 36 CC MO | 15C | 5745.0 - 5825.0 | 0.2582 |
| Power Output listed is conducted. Modular approval. This device must be professionally installed. Device is an 802.11 device supporting up to 3x3 Spatial Multiplexing MIMO configuration as described in this filing. This device is for use in a mobile only configuration. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Co-location has been evaluated for specific configurations as shown in filing(s) under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application Lm2td0FFKqhVYxw8uL+GJw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 06/29/2012 Application Dated: 06/29/2012 |
| Attention: Mark Luksich , DMTS, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7KHAP800 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b/g/n AP TX |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC MO | 15C | 2412.0 - 2462.0 | 0.9594 | ||
| 36 CC MO | 15C | 5745.0 - 5825.0 | 0.2582 |
| Power Output listed is conducted. Modular approval. This device must be professionally installed. Device is an 802.11 device supporting up to 3x3 Spatial Multiplexing MIMO configuration as described in this filing. This device is for use in a mobile only configuration. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Co-location has been evaluated for specific configurations as shown in filing(s) under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 02/20/2013 Application Dated: 12/19/2012 |
| Attention: Larry (Qianlin) Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7KHAP800 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g/n Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5260.0 - 5320.0 | 0.2455 | ||
| CC MO | 15E | 5270.0 - 5310.0 | 0.2472 | ||
| CC MO | 15E | 5500.0 - 5580.0 | 0.2489 | ||
| CC MO | 15E | 5660.0 - 5700.0 | 0.2506 |
| Output power is conducted. This device has 20 and 40 MHz BW modes. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
|
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Vera Hsu, | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Sporton International Inc. | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| No.8, Lane 724, Bo-ai St., Jhubei City, | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Hsinchu, 302 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Taiwan | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 06/29/2012 Application Dated: 06/29/2012 |
| Zebra Technologies Corporation |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Mark Luksich , DMTS, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7KHAP800 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g/n AP TX |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC MO | 15E | 5180.0 - 5240.0 | 0.05 |
| Power Output listed is conducted. Modular approval. This device must be professionally installed. Device is an 802.11 device supporting up to 3x3 Spatial Multiplexing MIMO configuration as described in this filing. This device is for use in a mobile only configuration. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Co-location has been evaluated for specific configurations as shown in filing(s) under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application c8EapyFz82gqMAagEMQKrA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 06/29/2012 Application Dated: 06/29/2012 |
| Attention: Mark Luksich , DMTS, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7KHAP800 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g/n AP TX |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC MO | 15E | 5180.0 - 5240.0 | 0.05 |
| Power Output listed is conducted. Modular approval. This device must be professionally installed. Device is an 802.11 device supporting up to 3x3 Spatial Multiplexing MIMO configuration as described in this filing. This device is for use in a mobile only configuration. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Co-location has been evaluated for specific configurations as shown in filing(s) under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 12/03/2013 Application Dated: 10/18/2013 |
| Attention: Larry (Qianlin) Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7KHAP800 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b/g/n Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 CC MO | 15C | 2412.0 - 2462.0 | 0.9594 | ||
| 36 CC MO | 15C | 5745.0 - 5825.0 | 0.2582 |
| This Permissive Change/Modification was originally issued on 11/19/2013. |
| Power Output listed is conducted. Modular approval. This device must be professionally installed. Device is an 802.11 device supporting up to 3x3 Spatial Multiplexing MIMO configuration as described in this filing. This device is for use in a mobile only configuration. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 35 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Co-location has been evaluated for specific configurations as shown in filing(s) under this FCC ID. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
|
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Sharon Jiang, | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Sporton International Inc. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| No.8, Lane 724, Bo-ai St., Jhubei City | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Hsinchu County, 302 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Taiwan | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 12/04/2013 Application Dated: 10/18/2013 |
| Attention: Larry (Qianlin) Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7KHAP800 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g/n Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.05 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.2455 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.2472 | ||
| CC MO ND | 15E | 5500.0 - 5580.0 | 0.2489 | ||
| CC MO ND | 15E | 5660.0 - 5700.0 | 0.2506 |
| This Permissive Change/Modification was originally issued on 12/03/2013. |
| Output power is conducted. This device has 20 and 40 MHz BW modes. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 35 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
|
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |
| Sharon Jiang, |
| Sporton International Inc. |
| No.8, Lane 724, Bo-ai St., Jhubei City |
| Hsinchu County, 302 |
| Taiwan |