FCC ID UZ7KHUSB600
802.11 a/b/g/n USB Dongle
by Zebra Technologies Corporation
Grantee Code: UZ7 Product Code: KHUSB600
Latest application date: 2016-06-02
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2016-06-02 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2016-06-02 |
| 5180-5240 MHz | Original Equipment | 2013-01-22 |
| 2412-2462 MHz | Original Equipment | 2013-01-22 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual | Users Manual | 2013-01-22 | PDF 337.9 KB |
| Internal Photos | Internal Photos | 2013-01-22 | PDF 469.3 KB |
| External Photos | External Photos | 2013-01-22 | PDF 160.2 KB |
| Label and Location | ID Label/Location Info | 2013-01-22 | PDF 92.2 KB |
| Label and location | ID Label/Location Info | 2013-01-22 | PDF 92.2 KB |
| Test Photos | Test Setup Photos | 2013-01-22 | PDF 354.1 KB |
| Channel Power Reduction | Test Report | 2013-01-22 | PDF 96.3 KB |
| Channel Power Reductions | Test Report | 2013-01-22 | PDF 96.3 KB |
| DFS Report | Test Report | 2013-01-22 | PDF 440.2 KB |
| Test Report | Test Report | 2013-01-22 | PDF 3.1 MB |
| Test Report | Test Report | 2013-01-22 | PDF 3.1 MB |
| Cover Letter | Cover Letter(s) | 2016-06-02 | PDF 82.4 KB |
| Cover Letters | Cover Letter(s) | 2013-01-22 | PDF 62.1 KB |
| MPE Report | RF Exposure Info | 2013-01-22 | PDF 116 KB |
| Operational Description Software Security Metadata only | Operational Description | PDF 405.3 KB |
Application Information
| Application ID | xTbgFwrnXs0iE3qhfwT4/g== |
|---|---|
| Final Action Date | 2016-06-02 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0015642663 |
| Model | KHUSB600 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.11 a/b/g/n USB Dongle |
| Responsible Party | Qianlin Zhou, Regulatory Specialist, Larry.Zhou@zebra.com  , 346-260-3543 |
| Test Firm | Sharon Jiang, SPORTON International Inc., sharonjiang@sporton.com.tw  , 886-3-656-9065 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is average conducted. Device is an 802.11bgan device in a 2x2 MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures, other than the intentional colocation described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device cannot be used while physically connected to a laptop or similar computer. For use with the equipment described in this filing. This device has power reduction on the top and bottom channels within each band, as described in this filing. This device uses 20 MHz and 40 MHz channel modes. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| xTbgFwrnXs0iE3qhfwT4/g== | 2016-06-02 | Class II permissive change or modification of presently authorized equipment |
| pcvjHfBx5p/F9yobUz/7Jg== | 2016-06-02 | Class II permissive change or modification of presently authorized equipment |
| tqui75Y0HnoFtis46M35+Q== | 2013-01-22 | Original Equipment |
| EYydY24rbBpPR0jIyTXmtg== | 2013-01-22 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2412-2462 MHz | 0.2143000 | 15C | CC, MO |
| 2412-2462 MHz | 0.2143 | 15C | CC, MO |
| 5180-5240 MHz | 0.0474 | 15E | 49, CC, MO |
| 5180-5240 MHz | 0.0474 | 15E | CC, MO, ND |
| 5260-5320 MHz | 0.1663 | 15E | CC, MO, ND |
| 5500-5580 MHz | 0.1169 | 15E | CC, MO, ND |
| 5660-5700 MHz | 0.0422 | 15E | CC, MO, ND |
| 5745-5825 MHz | 0.1122 | 15E | 49, CC, MO |
| 5745-5825 MHz | 0.1122 | 15C | CC, MO |
Grants
TCB Grant - Application xTbgFwrnXs0iE3qhfwT4/g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 06/02/2016 Application Dated: 06/01/2016 |
| Zebra Technologies Corporation |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7KHUSB600 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b/g/n USB Dongle |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2143 |
| Power Output listed is average conducted. Device is an 802.11bgan device in a 2x2 MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures, other than the intentional colocation described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device cannot be used while physically connected to a laptop or similar computer. For use with the equipment described in this filing. This device has power reduction on the top and bottom channels within each band, as described in this filing. This device uses 20 MHz and 40 MHz channel modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application xTbgFwrnXs0iE3qhfwT4/g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 06/02/2016 Application Dated: 06/01/2016 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7KHUSB600 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b/g/n USB Dongle |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2143 |
| Power Output listed is average conducted. Device is an 802.11bgan device in a 2x2 MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures, other than the intentional colocation described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device cannot be used while physically connected to a laptop or similar computer. For use with the equipment described in this filing. This device has power reduction on the top and bottom channels within each band, as described in this filing. This device uses 20 MHz and 40 MHz channel modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 01/22/2013 Application Dated: 01/21/2013 |
| Zebra Technologies Corporation |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Mark Luksich , DMTS, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7KHUSB600 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g/n USB Dongle |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO ND | 15E | 5180.0 - 5240.0 | 0.0474 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.1663 | ||
| CC MO ND | 15E | 5500.0 - 5580.0 | 0.1169 | ||
| CC MO ND | 15E | 5660.0 - 5700.0 | 0.0422 |
| Power Output listed is average conducted. Device is an 802.11bgan device in a 2x2 MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures, other than the intentional colocation described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device cannot be used while physically connected to a laptop or similar computer. For use with the equipment described in this filing. This device has power reduction on the top and bottom channels within each band, as described in this filing. This device uses 20 MHz and 40 MHz channel modes. Operation is disabled in the band 5600 MHz to 5650 MHz. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application tqui75Y0HnoFtis46M35+Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 01/22/2013 Application Dated: 01/21/2013 |
| Attention: Mark Luksich , DMTS, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7KHUSB600 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g/n USB Dongle |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO ND | 15E | 5180.0 - 5240.0 | 0.0474 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.1663 | ||
| CC MO ND | 15E | 5500.0 - 5580.0 | 0.1169 | ||
| CC MO ND | 15E | 5660.0 - 5700.0 | 0.0422 |
| Power Output listed is average conducted. Device is an 802.11bgan device in a 2x2 MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures, other than the intentional colocation described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device cannot be used while physically connected to a laptop or similar computer. For use with the equipment described in this filing. This device has power reduction on the top and bottom channels within each band, as described in this filing. This device uses 20 MHz and 40 MHz channel modes. Operation is disabled in the band 5600 MHz to 5650 MHz. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 06/02/2016 Application Dated: 06/01/2016 |
| Zebra Technologies Corporation |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7KHUSB600 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g/n USB Dongle |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 49 CC MO | 15E | 5180.0 - 5240.0 | 0.0474 | ||
| 49 CC MO | 15E | 5745.0 - 5825.0 | 0.1122 |
| Power Output listed is average conducted. Device is an 802.11bgan device in a 2x2 MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures, other than the intentional colocation described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device cannot be used while physically connected to a laptop or similar computer. For use with the equipment described in this filing. This device has power reduction on the top and bottom channels within each band, as described in this filing. This device uses 20 MHz and 40 MHz channel modes. Operation is disabled in the band 5600 MHz to 5650 MHz. |
| 49: | The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application pcvjHfBx5p/F9yobUz/7Jg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 06/02/2016 Application Dated: 06/01/2016 |
| Attention: Qianlin Zhou , Regulatory Specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7KHUSB600 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 a/b/g/n USB Dongle |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 49 CC MO | 15E | 5180.0 - 5240.0 | 0.0474 | ||
| 49 CC MO | 15E | 5745.0 - 5825.0 | 0.1122 |
| Power Output listed is average conducted. Device is an 802.11bgan device in a 2x2 MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures, other than the intentional colocation described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device cannot be used while physically connected to a laptop or similar computer. For use with the equipment described in this filing. This device has power reduction on the top and bottom channels within each band, as described in this filing. This device uses 20 MHz and 40 MHz channel modes. Operation is disabled in the band 5600 MHz to 5650 MHz. |
| 49: | The device has been approved under § 15.407(b)(4)(ii) for antenna gains of 10 dBi or less and cannot be manufactured, marketed, sold or imported after March 2, 2020. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 01/22/2013 Application Dated: 01/21/2013 |
| Zebra Technologies Corporation |
| 1 Zebra Plaza |
| Holtsville, NY 11742 |
| Attention: Mark Luksich , DMTS, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7KHUSB600 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b/g/n USB Dongle |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2143 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.1122 |
| Power Output listed is average conducted. Device is an 802.11bgan device in a 2x2 MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures, other than the intentional colocation described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device cannot be used while physically connected to a laptop or similar computer. For use with the equipment described in this filing. This device has power reduction on the top and bottom channels within each band, as described in this filing. This device uses 20 MHz and 40 MHz channel modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application EYydY24rbBpPR0jIyTXmtg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Zebra Technologies Corporation 1 Zebra Plaza Holtsville, NY 11742 United States |
Date of Grant: 01/22/2013 Application Dated: 01/21/2013 |
| Attention: Mark Luksich , DMTS, Regulatory Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | UZ7KHUSB600 |
| Name of Grantee: | Zebra Technologies Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 a/b/g/n USB Dongle |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2143 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.1122 |
| Power Output listed is average conducted. Device is an 802.11bgan device in a 2x2 MIMO configuration as described in this filing. The antennas used for this transmitter must be installed to provide a separation distance of at least 30 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures, other than the intentional colocation described in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device cannot be used while physically connected to a laptop or similar computer. For use with the equipment described in this filing. This device has power reduction on the top and bottom channels within each band, as described in this filing. This device uses 20 MHz and 40 MHz channel modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |