FCC ID UZ7MB82

MB82 Access Point Radio Module

by Zebra Technologies Corporation

Grantee Code: UZ7   Product Code: MB82
Latest application date: 2013-01-31

FCC ID Device Details

FCC IDUZ7MB82
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeUZ7
Product CodeMB82
Applicant BusinessZebra Technologies Corporation 🇺🇸
Related Domains zebra.com sporton.com.tw
Equipment ClassMB82 Access Point Radio Module
Test FirmSporton International Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2013-01-31
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2012-12-03
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2012-12-03
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2012-04-09
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2011-09-19
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2011-09-19
5260-5320 MHzClass II permissive change or modification of presently authorized equipment2010-09-22
2412-2462 MHzOriginal Equipment2009-11-06
5180-5240 MHzOriginal Equipment2009-11-06

Exhibits

DocumentTypeAvailableFile
Antenna_Guide_1.9_Rev_BUsers Manual2012-04-09PDF 5.1 MB
User manualUsers Manual2010-09-22PDF 2.1 MB
User ManualUsers Manual2009-11-06PDF 2.4 MB
user manualUsers Manual2009-11-06PDF 2.4 MB
Internal PhotoInternal Photos2013-01-31PDF 307.5 KB
Internal PhotosInternal Photos2012-12-03PDF 307.5 KB
Internal PhotosInternal Photos2010-09-22PDF 1.8 MB
Internal PhotosInternal Photos2009-11-06PDF 377.7 KB
Internal photosInternal Photos2009-11-06PDF 377.7 KB
External photoExternal Photos2013-01-31PDF 1.1 MB
External PhotosExternal Photos2012-12-03PDF 1.1 MB
ExphotoExternal Photos2011-09-19PDF 556.2 KB
External photosExternal Photos2011-09-19PDF 556.2 KB
External PhotosExternal Photos2010-09-22PDF 211.7 KB
External PhotosExternal Photos2009-11-06PDF 504.4 KB
External photosExternal Photos2009-11-06PDF 504.4 KB
LabelID Label/Location Info2010-09-22PDF 1.8 MB
ID label location infoID Label/Location Info2009-11-06PDF 104.7 KB
Label LocationID Label/Location Info2009-11-06PDF 104.7 KB
Operation DescriptionOperational Description2013-01-31PDF 184.8 KB
RF TEST PHOTOSTest Setup Photos2013-01-31PDF 857 KB
Test Setup Photos for DTSTest Setup Photos2012-12-03PDF 993.5 KB
Test Setup Photos for NIITest Setup Photos2012-12-03PDF 589.4 KB
TEST PHOTOSTest Setup Photos2011-09-19PDF 482.7 KB
TEST PHOTOSTest Setup Photos2010-09-22PDF 1.6 MB
Test Setup PhotosTest Setup Photos2009-11-06PDF 3.1 MB
test setup photosTest Setup Photos2009-11-06PDF 3.1 MB
FCC DFS Test ReportTest Report2013-01-31PDF 2 MB
FCC RF Test ReportTest Report2013-01-31PDF 4.7 MB
Co-location ReportTest Report2012-12-03PDF 96.4 KB
Test report for DTS-1Test Report2012-12-03PDF 3.1 MB
Test report for DTS-2Test Report2012-12-03PDF 3.3 MB
Test report for NIITest Report2012-12-03PDF 2.7 MB
Antenna listTest Report2011-09-19PDF 17.3 KB
DFS Test ReportTest Report2011-09-19PDF 1.3 MB
DFS test reportTest Report2011-09-19PDF 1.3 MB
MPE test reportRF Exposure Info2011-09-19PDF 101.5 KB
NII test reportTest Report2011-09-19PDF 2 MB
Test Report_DTSTest Report2011-09-19PDF 2.2 MB
Test Report_NIITest Report2011-09-19PDF 2 MB
Client DFS Test ReportTest Report2010-09-22PDF 250.7 KB
DFS Client Test ReportTest Report2010-09-22PDF 250.7 KB
MPE test reportTest Report2010-09-22PDF 120.1 KB
Master DFS Test ReportTest Report2010-09-22PDF 1.5 MB
NII Test Report_1Test Report2010-09-22PDF 4.8 MB
NII Test Report_2Test Report2010-09-22PDF 4.8 MB
NII Test Report_3Test Report2010-09-22PDF 3.7 MB
NII Test Report_4Test Report2010-09-22PDF 3.7 MB
NII Test Report_5Test Report2010-09-22PDF 3.6 MB
revised NII Test Report part 2Test Report2010-09-22PDF 4.9 MB
revised NII Test Report part 3Test Report2010-09-22PDF 4.7 MB
revised NII Test Report part 4Test Report2010-09-22PDF 4.6 MB
revised NII Test Report part 5Test Report2010-09-22PDF 4 MB
Test Report ITest Report2009-11-06PDF 4.9 MB
Test Report IITest Report2009-11-06PDF 5.4 MB
Test Report IIITest Report2009-11-06PDF 2.5 MB
test report ITest Report2009-11-06PDF 5.5 MB
test report IITest Report2009-11-06PDF 5.4 MB
test report IIITest Report2009-11-06PDF 5 MB
test report IVTest Report2009-11-06PDF 5 MB
FCC Attestations LetterAttestation Statements2013-01-31PDF 127.6 KB
FCC Attestations LetterCover Letter(s)2012-12-03PDF 126.9 KB
Expedited Review Candidates LetterCover Letter(s)2013-01-31PDF 123.9 KB
Expedited Review LetterCover Letter(s)2013-01-31PDF 15.8 KB
Cover Letter MB82Cover Letter(s)2012-04-09PDF 27.3 KB
FCC Letter of Authorization to Sign -Dave BareCover Letter(s)2012-04-09PDF 103 KB
Class II Permissive Change LetterCover Letter(s)2011-09-19PDF 21.9 KB
DoC DeclarationCover Letter(s)2011-09-19PDF 21.7 KB
DoC Declaration letterCover Letter(s)2011-09-19PDF 21.7 KB
POACover Letter(s)2011-09-19PDF 39 KB
Request for Confidentiality LetterCover Letter(s)2011-09-19PDF 22.3 KB
20dB bandwidth declaration letterCover Letter(s)2010-09-22PDF 116.9 KB
Class II Permissive Change letterCover Letter(s)2010-09-22PDF 23.8 KB
Confidentiality LetterCover Letter(s)2010-09-22PDF 25.8 KB
DFS Master Module declaration letterCover Letter(s)2010-09-22PDF 23.5 KB
Decloration Cover LetterCover Letter(s)2010-09-22PDF 24 KB
Power of AttorneyCover Letter(s)2010-09-22PDF 20.6 KB
Restricted Band LetterCover Letter(s)2010-09-22PDF 25.2 KB
Ad hoc letterCover Letter(s)2009-11-06PDF 23.6 KB
Co-LocationCover Letter(s)2009-11-06PDF 852.6 KB
Co-locationCover Letter(s)2009-11-06PDF 852.6 KB
DOC LetterCover Letter(s)2009-11-06PDF 23.5 KB
DOC letterCover Letter(s)2009-11-06PDF 23.5 KB
LMA LetterCover Letter(s)2009-11-06PDF 29.4 KB
LMA letterCover Letter(s)2009-11-06PDF 29.4 KB
PoACover Letter(s)2009-11-06PDF 20.6 KB
Request for ConfidentialityCover Letter(s)2009-11-06PDF 24.3 KB
Reuqest for ConfidentialityCover Letter(s)2009-11-06PDF 24.3 KB
MPE ReportRF Exposure Info2013-01-31PDF 90.4 KB
MPE reportRF Exposure Info2012-12-03PDF 98 KB
MPE_Co-locationRF Exposure Info2011-09-19PDF 101.5 KB
MPERF Exposure Info2009-11-06PDF 158 KB

Application Information

Application IDPgaARQewAvZL2siO4FDDhg==
Final Action Date2013-01-31
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0007722119
ModelMB82
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionMB82 Access Point Radio Module
Responsible PartyMark Luksich, DMTS, Regulatory Engineering, Mark.Luksich@zebra.com , 631-738-5134
AgentLeo Leo Leo, Sporton International Inc., leohuang@sporton.com.tw , 886-3-656-9065
Technical ContactVera Hsu, Sporton International Inc., verahsu@sporton.com.tw , 886-3-656-9065
Non-Technical ContactSporton International Inc., verahsu@sporton.com.tw , 886-3-656-9065
Test FirmAlex Chen, Sporton International Inc., alex@sporton.com.tw , 886-3-327-3456
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change adds 10 antennas as listed in the filing as well as 1T3R operation mode. Power listed is the maximum combined conducted output power as indicated in the filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. This module can be collocated with modules that are approved under the same FCC ID. OEM integrators must be provided with antenna installation instructions in combination with maximum output power. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This module is limited to be installed in the host, model: AP-650, produced by Motorola. This device must be professionally installed. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band.

Applications

Application IDDatePurpose
PgaARQewAvZL2siO4FDDhg==2013-01-31Class II permissive change or modification of presently authorized equipment
tyoxHVCMeMzjAKhGqYKaaw==2012-12-03Class II permissive change or modification of presently authorized equipment
TTIac4NsXf6nEtLfwkb8/g==2012-12-03Class II permissive change or modification of presently authorized equipment
v2GyRiAq5xa2QAM8jd/hzA==2012-04-09Class II permissive change or modification of presently authorized equipment
yGVpD0qJGJLE59UY6/wTZA==2011-09-19Class II permissive change or modification of presently authorized equipment
k1e3Bsqq0GfPbEOhRAAYyQ==2011-09-19Class II permissive change or modification of presently authorized equipment
F4SC4O9k0hfJLKjwGnEjhg==2010-09-22Class II permissive change or modification of presently authorized equipment
miFXRDFKwKB49oNgosq9Pg==2009-11-06Original Equipment
0pt7e0egjgsl0AYLpT/H+Q==2009-11-06Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.56215CCC, MO
2412-2462 MHz0.33615CCC, MO
2422-2452 MHz0.19315CCC, MO
5180-5240 MHz0.04815ECC, MO
5180-5240 MHz0.021415ECC, MO
5190-5230 MHz0.04815ECC, MO
5260-5320 MHz0.21115ECC, MO
5260-5320 MHz0.21115ECC, MO, ND
5270-5310 MHz0.22815ECC, MO
5270-5310 MHz0.22815ECC, MO, ND
5270-5310 MHz0.247215ECC, MO, ND
5500-5580 MHz0.212315ECC, MO, ND
5500-5700 MHz0.21215ECC, MO
5500-5580 MHz0.21215ECC, MO, ND
5510-5670 MHz0.22215ECC, MO
5510-5550 MHz0.203715ECC, MO, ND
5510-5550 MHz0.20415ECC, MO, ND
5660-5700 MHz0.123615ECC, MO, ND
5660-5700 MHz0.12415ECC, MO, ND
5670 MHz0.129715ECC, MO, ND
5670 MHz0.1315ECC, MO, ND
5745-5825 MHz0.23615CCC, MO
5745-5825 MHz0.30115CCC, MO
5755-5795 MHz0.26315CCC, MO

Grants

TCB Grant - Application yGVpD0qJGJLE59UY6/wTZA==

This application does not exist.

EAS Grant - Application yGVpD0qJGJLE59UY6/wTZA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States
  Date of Grant: 09/19/2011

Application Dated: 08/09/2011
 
Attention: Larry (Qianlin) Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7MB82
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Digital Transmission System
Notes: MB82 Access Point Radio Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.336  
CC MO 15C 5745.0  -  5825.0 0.236  

Power listed is the maximum combined conducted output power as indicated in the filing. Device is operating in a 2T3R Spatial Multiplexing MIMO configuration as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. This module can be collocated with modules that are approved under the same FCC ID. OEM integrators must be provided with antenna installation instructions in combination with maximum output power. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

This module is limited to be installed in the host, model: AP-650 , produced by Motorola.

This device must be professionally installed.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application v2GyRiAq5xa2QAM8jd/hzA==

This application does not exist.

EAS Grant - Application v2GyRiAq5xa2QAM8jd/hzA==

Mail To:
Mandy Liang,
Sporton International Inc.
No.8, Lane 724, Bo-ai St., Jhubei City,
Hsinchu, 302
Taiwan
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States
  Date of Grant: 04/09/2012

Application Dated: 01/12/2012
 
Attention: Larry (Qianlin) Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7MB82
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: MB82 Access Point Radio Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0214  
CC MO 15E 5260.0  -  5320.0 0.211  
CC MO 15E 5270.0  -  5310.0 0.228  
CC MO 15E 5500.0  -  5700.0 0.212  
CC MO 15E 5510.0  -  5670.0 0.222  

Output power is conducted. Operation in 5.15-5.25 GHz band is for indoor use only. Outdoor operation is subject to the professional installation instruction requirements as described in the User’s Manual. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application tyoxHVCMeMzjAKhGqYKaaw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 12/03/2012

Application Dated: 12/03/2012
Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
 
Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7MB82
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: MB82 Access Point Radio Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.048  
CC MO 15E 5190.0  -  5230.0 0.048  
CC MO ND 15E 5260.0  -  5320.0 0.211  
CC MO ND 15E 5270.0  -  5310.0 0.228  
CC MO ND 15E 5500.0  -  5580.0 0.212  
CC MO ND 15E 5660.0  -  5700.0 0.124  
CC MO ND 15E 5510.0  -  5550.0 0.204  
CC MO ND 15E 5670.0  -  5670.0 0.13  

This Class II Permissive Change adds additional antennas for 5180~5240MHz and 5190~5230MHz only as documented in the filing.

Power listed is the maximum combined conducted output power as indicated in the filing. Device is operating in a 2T3R Spatial Multiplexing MIMO configuration as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. This module can be collocated with modules that are approved under the same FCC ID. OEM integrators must be provided with antenna installation instructions in combination with maximum output power. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This module is limited to be installed in the host, model: AP-650 , produced by Motorola. This device must be professionally installed. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application tyoxHVCMeMzjAKhGqYKaaw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States
  Date of Grant: 12/03/2012

Application Dated: 12/03/2012
 
Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7MB82
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: MB82 Access Point Radio Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.048  
CC MO 15E 5190.0  -  5230.0 0.048  
CC MO ND 15E 5260.0  -  5320.0 0.211  
CC MO ND 15E 5270.0  -  5310.0 0.228  
CC MO ND 15E 5500.0  -  5580.0 0.212  
CC MO ND 15E 5660.0  -  5700.0 0.124  
CC MO ND 15E 5510.0  -  5550.0 0.204  
CC MO ND 15E 5670.0  -  5670.0 0.13  

This Class II Permissive Change adds additional antennas for 5180~5240MHz and 5190~5230MHz only as documented in the filing.

Power listed is the maximum combined conducted output power as indicated in the filing. Device is operating in a 2T3R Spatial Multiplexing MIMO configuration as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. This module can be collocated with modules that are approved under the same FCC ID. OEM integrators must be provided with antenna installation instructions in combination with maximum output power. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This module is limited to be installed in the host, model: AP-650 , produced by Motorola. This device must be professionally installed. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application TTIac4NsXf6nEtLfwkb8/g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 12/03/2012

Application Dated: 12/03/2012
Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
 
Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7MB82
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Digital Transmission System
Notes: MB82 Access Point Radio Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.562  
CC MO 15C 2422.0  -  2452.0 0.193  
CC MO 15C 5745.0  -  5825.0 0.301  
CC MO 15C 5755.0  -  5795.0 0.263  

This Class II Permissive Change adds additional antennas as documented in the filing. Power listed is the maximum combined conducted output power as indicated in the filing. Device is operating in a 2T3R Spatial Multiplexing MIMO configuration as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. This module can be collocated with modules that are approved under the same FCC ID. OEM integrators must be provided with antenna installation instructions in combination with maximum output power. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This module is limited to be installed in the host, model: AP-650 , produced by Motorola. This device must be professionally installed.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application TTIac4NsXf6nEtLfwkb8/g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States
  Date of Grant: 12/03/2012

Application Dated: 12/03/2012
 
Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7MB82
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Digital Transmission System
Notes: MB82 Access Point Radio Module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.562  
CC MO 15C 2422.0  -  2452.0 0.193  
CC MO 15C 5745.0  -  5825.0 0.301  
CC MO 15C 5755.0  -  5795.0 0.263  

This Class II Permissive Change adds additional antennas as documented in the filing. Power listed is the maximum combined conducted output power as indicated in the filing. Device is operating in a 2T3R Spatial Multiplexing MIMO configuration as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. This module can be collocated with modules that are approved under the same FCC ID. OEM integrators must be provided with antenna installation instructions in combination with maximum output power. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This module is limited to be installed in the host, model: AP-650 , produced by Motorola. This device must be professionally installed.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application PgaARQewAvZL2siO4FDDhg==

This application does not exist.

EAS Grant - Application PgaARQewAvZL2siO4FDDhg==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States
  Date of Grant: 01/31/2013

Application Dated: 12/03/2012
 
Attention: Larry (Qianlin) Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7MB82
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: MB82 Access Point Radio Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO ND 15E 5260.0  -  5320.0 0.211  
CC MO ND 15E 5500.0  -  5580.0 0.2123  
CC MO ND 15E 5660.0  -  5700.0 0.1236  
CC MO ND 15E 5510.0  -  5550.0 0.2037  
CC MO ND 15E 5670.0  -  5670.0 0.1297  
CC MO ND 15E 5270.0  -  5310.0 0.2472  
CC MO 15E 5180.0  -  5240.0 0.048  
CC MO 15E 5190.0  -  5230.0 0.048  

Class II Permissive Change adds 10 antennas as listed in the filing as well as 1T3R operation mode. Power listed is the maximum combined conducted output power as indicated in the filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. This module can be collocated with modules that are approved under the same FCC ID. OEM integrators must be provided with antenna installation instructions in combination with maximum output power. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

This module is limited to be installed in the host, model: AP-650, produced by Motorola.

This device must be professionally installed.

This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application miFXRDFKwKB49oNgosq9Pg==

Mail To:
Vera Hsu,
Sporton International Inc.
No.8, Lane 724, Bo-ai St., Jhubei City
Hsinchu County, 302
Taiwan
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 11/06/2009

Application Dated: 11/06/2009
Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
 
Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7MB82
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Digital Transmission System
Notes: MB82 Access Point Radio Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.562  
CC MO 15C 2422.0  -  2452.0 0.193  
CC MO 15C 5745.0  -  5825.0 0.301  
CC MO 15C 5755.0  -  5795.0 0.263  

Power listed is the maximum combined conducted output power as indicated in the filing. Device is operating in a 2T3R Spatial Multiplexing MIMO configuration as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. This module can be collocated with modules that are approved under the same FCC ID. OEM integrators must be provided with antenna installation instructions in combination with maximum output power. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

This module is limited to be installed in the host, model: AP-650 , produced by Motorola.

This device must be professionally installed.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application miFXRDFKwKB49oNgosq9Pg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States
  Date of Grant: 11/06/2009

Application Dated: 11/06/2009
 
Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7MB82
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Digital Transmission System
Notes: MB82 Access Point Radio Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.562  
CC MO 15C 2422.0  -  2452.0 0.193  
CC MO 15C 5745.0  -  5825.0 0.301  
CC MO 15C 5755.0  -  5795.0 0.263  

Power listed is the maximum combined conducted output power as indicated in the filing. Device is operating in a 2T3R Spatial Multiplexing MIMO configuration as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. This module can be collocated with modules that are approved under the same FCC ID. OEM integrators must be provided with antenna installation instructions in combination with maximum output power. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

This module is limited to be installed in the host, model: AP-650 , produced by Motorola.

This device must be professionally installed.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application k1e3Bsqq0GfPbEOhRAAYyQ==

This application does not exist.

EAS Grant - Application k1e3Bsqq0GfPbEOhRAAYyQ==

Mail To:
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States
  Date of Grant: 09/19/2011

Application Dated: 07/27/2011
 
Attention: Larry (Qianlin) Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7MB82
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: MB82 Access Point Radio Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.0214  
CC MO 15E 5260.0  -  5320.0 0.211  
CC MO 15E 5270.0  -  5310.0 0.228  
CC MO 15E 5500.0  -  5700.0 0.212  
CC MO 15E 5510.0  -  5670.0 0.222  

Power listed is the maximum combined conducted output power as indicated in the filing. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device is operating in a 2X3 Spatial Multiplexing MIMO configuration as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. This module can be collocated with modules that are approved under the same FCC ID. OEM integrators must be provided with antenna installation instructions in combination with maximum output power. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

This module is limited to be installed in the host, model: AP-650 , produced by Motorola.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application F4SC4O9k0hfJLKjwGnEjhg==

This application does not exist.

EAS Grant - Application F4SC4O9k0hfJLKjwGnEjhg==

Mail To:
Mandy Liang,
Sporton International Inc.
No.8, Lane 724, Bo-ai St., Jhubei City,
Hsinchu, 302
Taiwan
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States
  Date of Grant: 09/22/2010

Application Dated: 06/10/2010
 
Attention: Larry (Qianlin) Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7MB82
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: MB82 Access Point Radio Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5260.0  -  5320.0 0.211  
CC MO 15E 5270.0  -  5310.0 0.228  
CC MO 15E 5500.0  -  5700.0 0.212  
CC MO 15E 5510.0  -  5670.0 0.222  

This Permissive Change/Modification was originally issued on 09/14/2010.

Power listed is the maximum combined conducted output power as indicated in the filing. Operations in 5.15-5.25 GHz and 5.47-5.725 GHz bands are for indoor use only. Device is operating in a 2X3 Spatial Multiplexing MIMO configuration as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. This module can be collocated with modules that are approved under the same FCC ID. OEM integrators must be provided with antenna installation instructions in combination with maximum output power. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

This module is limited to be installed in the host, model: AP-650 , produced by Motorola.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 0pt7e0egjgsl0AYLpT/H+Q==

Mail To:
Mandy Liang,
Sporton International Inc.
No.8, Lane 724, Bo-ai St., Jhubei City,
Hsinchu, 302
Taiwan
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 11/06/2009

Application Dated: 11/06/2009
Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
 
Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7MB82
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: MB82 Access Point Radio Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.048  
CC MO 15E 5190.0  -  5230.0 0.048  

Power listed is the maximum combined conducted output power as indicated in the filing. Device is operating in a 2T3R Spatial Multiplexing MIMO configuration as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. This module can be collocated with modules that are approved under the same FCC ID. OEM integrators must be provided with antenna installation instructions in combination with maximum output power. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

This module is limited to be installed in the host, model: AP-650 , produced by Motorola.

This device must be professionally installed.

This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 0pt7e0egjgsl0AYLpT/H+Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States
  Date of Grant: 11/06/2009

Application Dated: 11/06/2009
 
Attention: Mark Luksich , DMTS, Regulatory Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7MB82
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: MB82 Access Point Radio Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.048  
CC MO 15E 5190.0  -  5230.0 0.048  

Power listed is the maximum combined conducted output power as indicated in the filing. Device is operating in a 2T3R Spatial Multiplexing MIMO configuration as described in this filing. Approval is limited to OEM installation only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. This module can be collocated with modules that are approved under the same FCC ID. OEM integrators must be provided with antenna installation instructions in combination with maximum output power. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

This module is limited to be installed in the host, model: AP-650 , produced by Motorola.

This device must be professionally installed.

This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: