1. FCC ID
  2. UZ7
  3. UZ7RE40

FCC ID UZ7RE40

RFID Module

by Zebra Technologies Corporation

Grantee Code: UZ7   Product Code: RE40
Latest application date: 2026-08-20

FCC ID Device Details

FCC IDUZ7RE40
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeUZ7
Product CodeRE40
Applicant BusinessZebra Technologies Corporation 🇺🇸
Related Domains zebra.com
Equipment ClassRFID Module
Test FirmSporton International Inc. Wensan Laboratory

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
902.75-927.25 MHzClass II permissive change or modification of presently authorized equipment2026-08-20
902.75-927.25 MHzClass II permissive change or modification of presently authorized equipment2026-04-17
902.75-927.25 MHzClass II permissive change or modification of presently authorized equipment2025-09-24
902.75-927.25 MHzClass II permissive change or modification of presently authorized equipment2025-03-10
902.75-927.25 MHzClass II permissive change or modification of presently authorized equipment2025-01-27
902.75-927.25 MHzClass II permissive change or modification of presently authorized equipment2024-09-25
902.75-927.25 MHzClass II permissive change or modification of presently authorized equipment2023-10-05
902.75-927.25 MHzClass II permissive change or modification of presently authorized equipment2023-05-11
902.75-927.25 MHzClass II permissive change or modification of presently authorized equipment2022-08-29
902.75-927.25 MHzClass II permissive change or modification of presently authorized equipment2022-05-03
902.75-927.25 MHzOriginal Equipment2020-07-21

Exhibits

DocumentTypeAvailableFile
User Manual Part 1Users Manual2025-09-06PDF 5.2 MB
User Manual Part 2Users Manual2025-09-06PDF 4.7 MB
User Manual Part 3Users Manual2025-09-06PDF 4.1 MB
Regulatory GuideUsers Manual2025-03-24PDF 717.7 KB
User ManualUsers Manual2025-03-24PDF 856.9 KB
User Manual Part 1Users Manual2024-04-02PDF 5.6 MB
User Manual Part 2Users Manual2024-04-02PDF 4.1 MB
User Manual QSGUsers Manual2021-01-17PDF 4 MB
User Manual RegulatoryUsers Manual2021-01-17PDF 49.3 KB
Internal PhotosInternal Photos2025-09-06PDF 505.5 KB
Internal PhotosInternal Photos2025-07-26PDF 1.1 MB
Internal PhotosInternal Photos2025-03-24PDF 2.6 MB
Internal PhotosInternal Photos2024-04-02PDF 389.4 KB
Host Device Internal PhotographsInternal Photos2023-11-07PDF 1.3 MB
Internal PhotosInternal Photos2023-02-25PDF 2.1 MB
Internal PhotosInternal Photos2022-10-30PDF 1.2 MB
Internal PhotosInternal Photos2021-01-17PDF 1.3 MB
04 STC_External PhotoExternal Photos2025-11-17PDF 683.4 KB
External PhotosExternal Photos2025-09-06PDF 993 KB
External PhotosExternal Photos2025-07-26PDF 602.9 KB
External PhotosExternal Photos2025-03-24PDF 1.5 MB
External PhotosExternal Photos2024-04-02PDF 857.5 KB
Additional Host Device External PhotographsExternal Photos2023-11-07PDF 262.7 KB
EUT & Host Device External PhotographsExternal Photos2023-11-07PDF 395.3 KB
External PhotosExternal Photos2023-02-25PDF 1.1 MB
External PhotosExternal Photos2022-10-30PDF 426.6 KB
External PhotosExternal Photos2021-01-17PDF 2.9 MB
Label Model PlateID Label/Location Info2026-08-20PDF 195.9 KB
Label Radio PODID Label/Location Info2026-08-20PDF 64.1 KB
Label and Location InfoID Label/Location Info2026-08-20PDF 38.7 KB
Host Label_radio labelID Label/Location Info2026-04-17PDF 31 KB
Host label locationID Label/Location Info2026-04-17PDF 34.6 KB
Host model agency labelID Label/Location Info2026-04-17PDF 77.3 KB
Host Label & Label LocationID Label/Location Info2025-03-10PDF 402.3 KB
Host Label & Label LocationID Label/Location Info2025-01-27PDF 392 KB
Label LocationID Label/Location Info2024-09-25PDF 35.1 KB
Label SampleID Label/Location Info2024-09-25PDF 470.5 KB
Label & Label LocationID Label/Location Info2023-10-05PDF 267.7 KB
Label & Label LocationID Label/Location Info2023-05-11PDF 788.5 KB
Label & Label LocationID Label/Location Info2022-05-03PDF 252.1 KB
Label LocationID Label/Location Info2020-07-21PDF 34.1 KB
Label SampleID Label/Location Info2020-07-21PDF 90.5 KB
03 STC_Antenna Spec-Test Setup PhotoTest Setup Photos2025-11-17PDF 984.5 KB
03 STC_FCC Test Setup Photo_DSSTest Setup Photos2025-11-17PDF 484.9 KB
Test Setup PhotosTest Setup Photos2025-09-06PDF 1,011.7 KB
SAR EUT Test Position PhotosTest Setup Photos2025-07-26PDF 801.2 KB
Test Setup PhotosTest Setup Photos2025-07-26PDF 1.6 MB
TSUPTest Setup Photos2025-03-24PDF 448.4 KB
TSUP AntennaTest Setup Photos2025-03-24PDF 297.4 KB
TSUP SARTest Setup Photos2025-03-24PDF 133.3 KB
Test Setup PhotosTest Setup Photos2024-04-02PDF 713.9 KB
Test Setup PhotosTest Setup Photos2023-11-07PDF 863.3 KB
TSUPTest Setup Photos2023-02-25PDF 360.8 KB
Test Setup PhotosTest Setup Photos2022-10-30PDF 901.2 KB
Test Setup PhotosTest Setup Photos2021-01-17PDF 2 MB
Antenna SpecificationTest Report2026-08-20PDF 449.2 KB
Test reportTest Report2026-04-17PDF 3.7 MB
03 Antenna Spec-AUT ReportTest Report2025-09-24PDF 389.7 KB
03 FCC Test Report_DSSTest Report2025-09-24PDF 565.7 KB
Antenna SpecificationTest Report2025-03-10PDF 455.8 KB
Test ReportTest Report2025-03-10PDF 980.9 KB
Test ReportTest Report2025-01-27PDF 1.5 MB
Antenna ReportTest Report2024-09-25PDF 304.1 KB
Test ReportTest Report2024-09-25PDF 2.1 MB
Test ReportTest Report2023-10-05PDF 1.5 MB
Test ReportTest Report2023-05-11PDF 2.4 MB
Test Report DSSTest Report2022-08-29PDF 1.1 MB
Test ReportTest Report2022-05-03PDF 3.6 MB
Test ReportTest Report2020-07-21PDF 4.3 MB
Attestation Statement part 2.911(d)(7)Attestation Statements2026-08-20PDF 214.9 KB
Attstn Stmts parts 2.911(d)(5)(i)&(ii)Attestation Statements2026-08-20PDF 93.1 KB
Attestation Section 2.911(d)(5)(i) and (ii) FilingAttestation Statements2026-04-17PDF 264.1 KB
US Agent letterAttestation Statements2026-04-17PDF 214.9 KB
01 FCC 2.911(d)(5) AttestationAttestation Statements2025-09-24PDF 453.3 KB
01 FCC Agent Attestation_Applicant&AgentAttestation Statements2025-09-24PDF 370.4 KB
2.911 (d)(5)(i)(ii) Attestation StatementAttestation Statements2025-03-10PDF 739.3 KB
US Agent Attestation LetterAttestation Statements2025-03-10PDF 388 KB
2.911 (d)(5)(i) Attestation StatementAttestation Statements2025-01-27PDF 103 KB
2.911 (d)(5)(ii) Attestation StatementAttestation Statements2025-01-27PDF 102.9 KB
US Agent Attestation LetterAttestation Statements2025-01-27PDF 110.5 KB
Att Statements Part2.911(d)(5)(i)&(ii)Attestation Statements2024-09-25PDF 738.8 KB
Attestation Statement 2.911(d)(7)Attestation Statements2024-09-25PDF 370.7 KB
2.911 (d)(5)(i) Attestation StatementAttestation Statements2023-10-05PDF 127.3 KB
2.911 (d)(5)(ii) Attestation StatementAttestation Statements2023-10-05PDF 125.5 KB
US Agent Attestation LetterAttestation Statements2023-10-05PDF 786.8 KB
2.911 (d)(5)(i) Attestation StatementAttestation Statements2023-05-11PDF 146.7 KB
2.911 (d)(5)(ii) Attestation StatementAttestation Statements2023-05-11PDF 146.7 KB
US Agent Attestation LetterAttestation Statements2023-05-11PDF 150.6 KB
Agent Authorization LetterCover Letter(s)2026-08-20PDF 828.5 KB
C2PC LetterCover Letter(s)2026-08-20PDF 828.5 KB
Confidentiality Request LetterCover Letter(s)2026-08-20PDF 828.5 KB
Confidentiality letterCover Letter(s)2026-04-17PDF 168.9 KB
02 FCC Authorization LetterCover Letter(s)2025-09-24PDF 413.5 KB
02 FCC C2PC LetterCover Letter(s)2025-09-24PDF 417 KB
02 FCC LMA LetterCover Letter(s)2025-09-24PDF 425.2 KB
02 FCC Request for STCCover Letter(s)2025-09-24PDF 413.2 KB
C2PC Request letterCover Letter(s)2025-03-10PDF 334.9 KB
DoS LetterCover Letter(s)2025-03-10PDF 149.7 KB
FCC Agent Authorization LetterCover Letter(s)2025-03-10PDF 435.5 KB
FCC Short term Confidentiality RequestCover Letter(s)2025-03-10PDF 416.3 KB
C2PC Request LetterCover Letter(s)2025-01-27PDF 55.7 KB
FCC Agent Authorization LetterCover Letter(s)2025-01-27PDF 80.3 KB
FCC Short term Confidentiality RequestCover Letter(s)2025-01-27PDF 99 KB
Letter of AuthorizationCover Letter(s)2025-01-27PDF 486.2 KB
Authorization LetterCover Letter(s)2024-09-25PDF 508 KB
C2PC LetterCover Letter(s)2024-09-25PDF 508 KB
Confidentiality LetterCover Letter(s)2024-09-25PDF 508 KB
C2PC Request letterCover Letter(s)2023-10-05PDF 509.7 KB
FCC Agent Authorization LetterCover Letter(s)2023-10-05PDF 526.4 KB
FCC Short term Confidentiality RequestCover Letter(s)2023-10-05PDF 598.6 KB
C2PC Request letterCover Letter(s)2023-05-11PDF 67.3 KB
DoS LetterCover Letter(s)2023-05-11PDF 92 KB
FCC Short Term Confidentiality Request LetterCover Letter(s)2023-05-11PDF 96.5 KB
Cover LetterCover Letter(s)2022-08-29PDF 919.3 KB
Authorization letterCover Letter(s)2022-05-03PDF 486.2 KB
CIIPC LetterCover Letter(s)2022-05-03PDF 60.3 KB
FCC Confidential LetterCover Letter(s)2022-05-03PDF 97.2 KB
Cover LetterCover Letter(s)2020-07-21PDF 606.5 KB
Modular Approval LetterCover Letter(s)2020-07-21PDF 651.8 KB
SAR ReportRF Exposure Info2026-08-20PDF 849.7 KB
SAR Report App ARF Exposure Info2026-08-20PDF 122.5 KB
SAR Report App BRF Exposure Info2026-08-20PDF 109.4 KB
SAR Report App CRF Exposure Info2026-08-20PDF 2 MB
RF exposure reportRF Exposure Info2026-04-17PDF 322.7 KB
03 FCC RF ExposureRF Exposure Info2025-09-24PDF 124.5 KB
RF ExposureRF Exposure Info2025-03-10PDF 157.6 KB
SAR Report Part 1RF Exposure Info2025-01-27PDF 2.7 MB
SAR Report Part 1RF Exposure Info2025-01-27PDF 2.7 MB
SAR Report Part 2RF Exposure Info2025-01-27PDF 5.1 MB
SAR Report Part 2RF Exposure Info2025-01-27PDF 5.3 MB
SAR Report Part 3RF Exposure Info2025-01-27PDF 1.5 MB
SAR Report Part 3RF Exposure Info2025-01-27PDF 1.7 MB
SAR ReportRF Exposure Info2024-09-25PDF 998.3 KB
SAR Report App ARF Exposure Info2024-09-25PDF 1.1 MB
SAR Report App BRF Exposure Info2024-09-25PDF 2.9 MB
SAR Report App C pt. 1RF Exposure Info2024-09-25PDF 5.5 MB
SAR Report App C pt. 2RF Exposure Info2024-09-25PDF 5.7 MB
RF ExposureRF Exposure Info2023-10-05PDF 152.1 KB
RF ExposureRF Exposure Info2023-05-11PDF 385.9 KB
RF ExposureRF Exposure Info2022-05-03PDF 213.3 KB
RF ExposureRF Exposure Info2020-07-21PDF 299.6 KB
User Manual QSG Part 1 Metadata onlyUsers Manual2027-02-16PDF 5.4 MB
User Manual QSG Part 2 Metadata onlyUsers Manual2027-02-16PDF 5.5 MB
User Manual QSG Part 3 Metadata onlyUsers Manual2027-02-16PDF 4.1 MB
User Manual Regulatory Statements Metadata onlyUsers Manual2027-02-16PDF 2 MB
User manual_1 Metadata onlyUsers Manual2026-10-14PDF 1.2 MB
User manual_2 Metadata onlyUsers Manual2026-10-14PDF 3.2 MB
Internal Photos Metadata onlyInternal Photos2027-02-16PDF 3.8 MB
Internal photo_1 Metadata onlyInternal Photos2026-10-14PDF 5.3 MB
Internal photo_2 Metadata onlyInternal Photos2026-10-14PDF 3.8 MB
External Photos Metadata onlyExternal Photos2027-02-16PDF 1.8 MB
External photos Metadata onlyExternal Photos2026-10-14PDF 2.1 MB
SAR TSUP App D Metadata onlyTest Setup Photos2027-02-16PDF 226.1 KB
Test setup photos Metadata onlyTest Setup Photos2026-10-14PDF 580.4 KB
Block Diagram Metadata onlyBlock DiagramPDF 301.6 KB
Block Diagram RFID Carrier Board Metadata onlyBlock DiagramPDF 166.1 KB
Block Diagram RFID Module Metadata onlyBlock DiagramPDF 153.5 KB
Schematics Metadata onlySchematicsPDF 397.5 KB
Schematics Metadata onlySchematicsPDF 410.4 KB
Schematics RFID Carrier Board Metadata onlySchematicsPDF 410.2 KB
Schematics RFID Module Metadata onlySchematicsPDF 426.1 KB
Op Des Antenna D10008153 Metadata onlyOperational DescriptionPDF 1.3 MB
Op Des Antenna S9025PR Metadata onlyOperational DescriptionPDF 423.4 KB
Op Desc Theory of Operation Metadata onlyOperational DescriptionPDF 130.9 KB
Operational Description Metadata onlyOperational DescriptionPDF 49.6 KB
Operational Description AN480 Metadata onlyOperational DescriptionPDF 3.9 MB
Theory of Operation Metadata onlyOperational DescriptionPDF 340 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 49.6 KB
Parts List Carrier Metadata onlyParts List/Tune Up InfoPDF 55.8 KB
Parts List Module Metadata onlyParts List/Tune Up InfoPDF 120.9 KB
Tune Up Procedure Metadata onlyParts List/Tune Up InfoPDF 93.7 KB
Tune Up Procedure Metadata onlyParts List/Tune Up InfoPDF 54.2 KB
Tune up procedure Metadata onlyParts List/Tune Up InfoPDF 54.2 KB
Tune-up document Metadata onlyParts List/Tune Up InfoPDF 92.5 KB

Application Information

Application IDbgmfIs12EdCqXho0hBDUBQ==
Final Action Date2026-08-20
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0015642663
ModelRE40
Frequency Range902.75-927.25 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionRFID Module
Responsible PartyDharmajit Solanki, dsolanki@zebra.com , 4169706612
Non-Technical ContactJay Cadiz, Zebra Technologies Corporation, JCadiz@zebra.com , 847-616-5806
Test FirmAlex CHEN, Sporton International Inc. Wensan Laboratory, alex@sporton.com.tw , 886-3-327-3456
TCB Emailcb@industrial-ia.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Long-Term ConfidentialityYes
Modular EquipmentLimited Single Modular Approval
Composite DeviceNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo

Applications

Application IDDatePurpose
bgmfIs12EdCqXho0hBDUBQ==2026-08-20Class II permissive change or modification of presently authorized equipment
lxpheWU0QuOTsKwlbb3LHg==2026-04-17Class II permissive change or modification of presently authorized equipment
hLJ8yiqTTYnnmAH4guNhhg==2025-09-24Class II permissive change or modification of presently authorized equipment
FpeuRhXd3dFWjdim8xePlw==2025-03-10Class II permissive change or modification of presently authorized equipment
7Oi+XPOnMDL9U3zzKVkdhA==2025-01-27Class II permissive change or modification of presently authorized equipment
P1Me4xoQm87TSvV1S+wHNw==2024-09-25Class II permissive change or modification of presently authorized equipment
Yk7mKv/xRKKKpcVBZDUcqw==2023-10-05Class II permissive change or modification of presently authorized equipment
uFi3TSfCVuImT02aeSiwYQ==2023-05-11Class II permissive change or modification of presently authorized equipment
izNCoI0t181eA34he39XoQ==2022-08-29Class II permissive change or modification of presently authorized equipment
SwxDMpTfqqzKJeMytpfFkg==2022-05-03Class II permissive change or modification of presently authorized equipment
CF4olkebIjbYPAv5/w9TMA==2020-07-21Original Equipment

Equipment Authorization

FrequencyOutputRules
902.75-927.25 MHz0.527200015C
902.75-927.25 MHz0.5272000

Grants

TCB Grant - Application Yk7mKv/xRKKKpcVBZDUcqw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratories Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
 Date of Grant: 10/05/2023

Application Dated: 10/05/2023
Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
 
Attention: Qianlin Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7RE40
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: RFID Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 902.75  -  927.25 0.5272  

Output power listed is conducted. Limited Single Modular Approval for mobile RF Exposure condition. The antenna used with this module must not exceed 6 dBi gain and must be installed to meet the RF exposure compliance separation distance of 25 cm, and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device.

Class II Permissive Change. Integrating pre-certified RFID Module into host ZT411 and ZT421 as well as co-location with 802.11ac radio module (FCC ID: I28MD-FXLAN111AC) and Bluetooth Radio Module (FCC ID: I28-ZBRZQ3BT) documented in this filing.


EAS Grant - Application Yk7mKv/xRKKKpcVBZDUcqw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States 		  Date of Grant: 10/05/2023

Application Dated: 10/05/2023
 
Attention: Qianlin Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7RE40
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: RFID Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 902.75  -  927.25 0.5272  

Output power listed is conducted. Limited Single Modular Approval for mobile RF Exposure condition. The antenna used with this module must not exceed 6 dBi gain and must be installed to meet the RF exposure compliance separation distance of 25 cm, and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device.

Class II Permissive Change. Integrating pre-certified RFID Module into host ZT411 and ZT421 as well as co-location with 802.11ac radio module (FCC ID: I28MD-FXLAN111AC) and Bluetooth Radio Module (FCC ID: I28-ZBRZQ3BT) documented in this filing.



TCB Grant - Application uFi3TSfCVuImT02aeSiwYQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratories Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
 Date of Grant: 05/11/2023

Application Dated: 05/11/2023
Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
 
Attention: Qianlin Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7RE40
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: RFID Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 902.75  -  927.25 0.5272  

Output power listed is conducted. Limited Single Modular Approval for mobile RF Exposure condition. The antenna used with this module must not exceed 6 dBi gain and must be installed to meet the RF exposure compliance separation distance of 25 cm, and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device.

Class II Permissive Change (5/3/2022): Integrating pre-certified RFID Module into host ZD611 and ZD621 as well as co-location with WLAN/BT module (FCC ID: I28-WYSBHVDXP) documented in this filing.


EAS Grant - Application uFi3TSfCVuImT02aeSiwYQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States 		  Date of Grant: 05/11/2023

Application Dated: 05/11/2023
 
Attention: Qianlin Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7RE40
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: RFID Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 902.75  -  927.25 0.5272  

Output power listed is conducted. Limited Single Modular Approval for mobile RF Exposure condition. The antenna used with this module must not exceed 6 dBi gain and must be installed to meet the RF exposure compliance separation distance of 25 cm, and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device.

Class II Permissive Change (5/3/2022): Integrating pre-certified RFID Module into host ZD611 and ZD621 as well as co-location with WLAN/BT module (FCC ID: I28-WYSBHVDXP) documented in this filing.



TCB Grant - Application SwxDMpTfqqzKJeMytpfFkg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
 Date of Grant: 05/03/2022

Application Dated: 05/03/2022
Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
 
Attention: Qianlin Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7RE40
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: RFID Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 902.75  -  927.25 0.5272  

Output power listed is conducted. Limited Single Modular Approval for mobile RF Exposure condition. The antenna used with this module must not exceed 6 dBi gain and must be installed to meet the RF exposure compliance separation distance of 25 cm, and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device.

C2PC purpose for adding pre-certified RFID Module into host ZD611 as well as co-location with the WLAN/BT module (FCC ID: I28MD-FXLAN11AC) and BT5 Module (FCC ID: I28-EYSNSNZWWZ1) documented in this filing


EAS Grant - Application SwxDMpTfqqzKJeMytpfFkg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States 		  Date of Grant: 05/03/2022

Application Dated: 05/03/2022
 
Attention: Qianlin Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7RE40
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: RFID Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 902.75  -  927.25 0.5272  

Output power listed is conducted. Limited Single Modular Approval for mobile RF Exposure condition. The antenna used with this module must not exceed 6 dBi gain and must be installed to meet the RF exposure compliance separation distance of 25 cm, and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device.

C2PC purpose for adding pre-certified RFID Module into host ZD611 as well as co-location with the WLAN/BT module (FCC ID: I28MD-FXLAN11AC) and BT5 Module (FCC ID: I28-EYSNSNZWWZ1) documented in this filing



TCB Grant - Application P1Me4xoQm87TSvV1S+wHNw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
13146 NW 86th Drive Suite 400
Alachua, FL 32615
 Date of Grant: 09/25/2024

Application Dated: 09/23/2024
Zebra Technologies Corporation
3 Overlook Point
Lincolnshire, IL 60069
 
Attention: Dharmajit Solanki , Principal Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7RE40
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: RFID Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 902.75  -  927.25 0.5272  

Output power listed is conducted. Limited Single Modular Approval for mobile RF Exposure condition. The antenna used with this module must not exceed 6 dBi gain and must be installed to meet the RF exposure compliance separation distance of 25 cm, and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device.

Class II Permissive Change (5/3/2022): Integrating pre-certified RFID Module into host ZD611 as well as co-location with the WLAN/BT module (FCC ID: I28MD-FXLAN11AC) and BT5 Module (FCC ID: I28-EYSNSNZWWZ1) documented in this filing.

Class II Permissive Change: (8/29/2022): Adds two RF connector ports on the Carrier Board.

Class II Permissive Change (this application): Integrating RFID Module for portable exposure conditions in Zebra RFID Reader XBK-ET6X-RFID which will be installed to Zebra tablet devices FCC ID: UZ7ET65AW or FCC ID: UZ7ET60AW. The highest reported SAR for product-specific (10g SAR extremity) and simultaneous transmission exposure conditions are 1.97W/kg and 2.87 W/kg, respectively.


EAS Grant - Application P1Me4xoQm87TSvV1S+wHNw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Zebra Technologies Corporation
3 Overlook Point
Lincolnshire, IL 60069
United States 		  Date of Grant: 09/25/2024

Application Dated: 09/23/2024
 
Attention: Dharmajit Solanki , Principal Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7RE40
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: RFID Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 902.75  -  927.25 0.5272  

Output power listed is conducted. Limited Single Modular Approval for mobile RF Exposure condition. The antenna used with this module must not exceed 6 dBi gain and must be installed to meet the RF exposure compliance separation distance of 25 cm, and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device.

Class II Permissive Change (5/3/2022): Integrating pre-certified RFID Module into host ZD611 as well as co-location with the WLAN/BT module (FCC ID: I28MD-FXLAN11AC) and BT5 Module (FCC ID: I28-EYSNSNZWWZ1) documented in this filing.

Class II Permissive Change: (8/29/2022): Adds two RF connector ports on the Carrier Board.

Class II Permissive Change (this application): Integrating RFID Module for portable exposure conditions in Zebra RFID Reader XBK-ET6X-RFID which will be installed to Zebra tablet devices FCC ID: UZ7ET65AW or FCC ID: UZ7ET60AW. The highest reported SAR for product-specific (10g SAR extremity) and simultaneous transmission exposure conditions are 1.97W/kg and 2.87 W/kg, respectively.



TCB Grant - Application lxpheWU0QuOTsKwlbb3LHg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  IIA Lab Services, LLC
13146 NW 86th Drive Suite 400
Alachua, FL 32615
Date of Grant: 04/17/2026

Application Dated: 04/15/2026
Zebra Technologies Corporation
3 Overlook Point
Lincolnshire, IL 60069
 
Attention: Dharmajit Solanki , Principal Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7RE40
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: RFID Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 902.75  -  927.25 0.5272  

Output power listed is conducted. Limited Single Modular Approval for mobile RF Exposure condition. The antenna used with this module must not exceed 6 dBi gain and must be installed to meet the RF exposure compliance separation distance of 25 cm, and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device.

Class II Permissive Change (5/3/2022): Integrating pre-certified RFID Module into host ZD611 as well as co-location with the WLAN/BT module (FCC ID: I28MD-FXLAN11AC) and BT5 Module (FCC ID: I28-EYSNSNZWWZ1) documented in this filing.

Class II Permissive Change: (8/29/2022): Adds two RF connector ports on the Carrier Board.

Class II Permissive Change (9/23/2024): Integrating RFID Module for portable exposure conditions in Zebra RFID Reader XBK-ET6X-RFID which will be installed to Zebra tablet devices FCC ID: UZ7ET65AW or FCC ID: UZ7ET60AW. The highest reported SAR for product-specific (10g SAR extremity) and simultaneous transmission exposure conditions are 1.97W/kg and 2.87 W/kg, respectively.

Class II Permissive Change (this application): Integrating this RFID Module for mobile exposure conditions into Zebra Desktop Printer, model ZD621 as well as co-location with Bluetooth module (FCC ID: I28-EYSNSNZWWZ1) and 4G module (FCC ID: XMR201808EC25AF) documented in this filing.


TCB Grant - Application izNCoI0t181eA34he39XoQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
 Date of Grant: 08/29/2022

Application Dated: 08/24/2022
Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
 
Attention: Qianlin Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7RE40
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: RFID Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 902.75  -  927.25 0.5272  

Output power listed is conducted. Limited Single Modular Approval for mobile RF Exposure condition. The antenna used with this module must not exceed 6 dBi gain and must be installed to meet the RF exposure compliance separation distance of 25 cm, and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device.

Class II Permissive Change (5/3/2022): Integrating pre-certified RFID Module into host ZD611 as well as co-location with the WLAN/BT module (FCC ID: I28MD-FXLAN11AC) and BT5 Module (FCC ID: I28-EYSNSNZWWZ1) documented in this filing.

Adds two RF connector ports on the Carrier Board.


EAS Grant - Application izNCoI0t181eA34he39XoQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States 		  Date of Grant: 08/29/2022

Application Dated: 08/24/2022
 
Attention: Qianlin Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7RE40
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: RFID Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 902.75  -  927.25 0.5272  

Output power listed is conducted. Limited Single Modular Approval for mobile RF Exposure condition. The antenna used with this module must not exceed 6 dBi gain and must be installed to meet the RF exposure compliance separation distance of 25 cm, and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device.

Class II Permissive Change (5/3/2022): Integrating pre-certified RFID Module into host ZD611 as well as co-location with the WLAN/BT module (FCC ID: I28MD-FXLAN11AC) and BT5 Module (FCC ID: I28-EYSNSNZWWZ1) documented in this filing.

Adds two RF connector ports on the Carrier Board.



TCB Grant - Application hLJ8yiqTTYnnmAH4guNhhg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc.
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 09/24/2025

Application Dated: 09/24/2025
Zebra Technologies Corporation
3 Overlook Point
Lincolnshire, IL 60069
 
Attention: Dharmajit Solanki , Principal Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7RE40
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: RFID Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 902.75  -  927.25 0.5272  

Class II Permissive Change to add specific antennas described in the filing. Output power listed is conducted. Limited Single Modular Approval for mobile RF Exposure condition. The antenna used with this module must not exceed 6 dBi gain and must be installed to meet the RF exposure compliance separation distance of 25 cm, or 20 cm for only using the antennas in this filing, and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device.

TCB Grant - Application FpeuRhXd3dFWjdim8xePlw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratories Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 03/10/2025

Application Dated: 03/10/2025
Zebra Technologies Corporation
3 Overlook Point
Lincolnshire, IL 60069
 
Attention: Dharmajit Solanki , Principal Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7RE40
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: RFID Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 902.75  -  927.25 0.5272  

Output power listed is conducted. Limited Single Modular Approval for mobile RF Exposure condition. The antenna used with this module must not exceed 6 dBi gain and must be installed to meet the RF exposure compliance separation distance of 20 cm, and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device.

Class II Permissive Change: Integrating pre-certified RFID Module into host ZT411 & ZT421 as well as co-location separately with WLAN/BT module with FCC ID: I28-WYSBHVDXP documented in this filing.


TCB Grant - Application CF4olkebIjbYPAv5/w9TMA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
 Date of Grant: 07/21/2020

Application Dated: 07/17/2020
Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
 
Attention: Qianlin Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7RE40
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: RFID Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 902.75  -  927.25 0.5272  

Output power listed is conducted. Limited Single Modular Approval for mobile RF Exposure condition. The antenna used with this module must not exceed 6 dBi gain and must be installed to meet the RF exposure compliance separation distance of 25 cm, and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device.

EAS Grant - Application CF4olkebIjbYPAv5/w9TMA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States 		  Date of Grant: 07/21/2020

Application Dated: 07/17/2020
 
Attention: Qianlin Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7RE40
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: RFID Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 902.75  -  927.25 0.5272  

Output power listed is conducted. Limited Single Modular Approval for mobile RF Exposure condition. The antenna used with this module must not exceed 6 dBi gain and must be installed to meet the RF exposure compliance separation distance of 25 cm, and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device.



TCB Grant - Application bgmfIs12EdCqXho0hBDUBQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  IIA Lab Services, LLC
13146 NW 86th Drive Suite 400
Alachua, FL 32615
Date of Grant: 08/20/2026

Application Dated: 08/11/2026
Zebra Technologies Corporation
3 Overlook Point
Lincolnshire, IL 60069
 
Attention: Dharmajit Solanki , Principal Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7RE40
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: RFID Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 902.75  -  927.25 0.5272  

Output power listed is conducted. Limited Single Modular Approval for mobile RF Exposure condition. The antenna used with this module must not exceed 6 dBi gain and must be installed to meet the RF exposure compliance separation distance of 25 cm, and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device.

Class II Permissive Change (5/3/2022): Integrating pre-certified RFID Module into host ZD611 as well as co-location with the WLAN/BT module (FCC ID: I28MD-FXLAN11AC) and BT5 Module (FCC ID: I28-EYSNSNZWWZ1) documented in this filing.

Class II Permissive Change: (8/29/2022): Adds two RF connector ports on the Carrier Board.

Class II Permissive Change (9/23/2024): Integrating RFID Module for portable exposure conditions in Zebra RFID Reader XBK-ET6X-RFID which will be installed to Zebra tablet devices FCC ID: UZ7ET65AW or FCC ID: UZ7ET60AW. The highest reported SAR for product-specific (10g SAR extremity) and simultaneous transmission exposure conditions are 1.97W/kg and 2.87 W/kg, respectively.

Class II Permissive Change (4/17/2026): Integrating this RFID Module for mobile exposure conditions into Zebra Desktop Printer, model ZD621 as well as co-location with Bluetooth module (FCC ID: I28-EYSNSNZWWZ1) and 4G module (FCC ID: XMR201808EC25AF) documented in this filing.

Class II Permissive Change (This Application): Integrating this RFID Module for mobile exposure conditions into Zebra Thermal Label Printer, Model ZQ630, as well as co-location with Wi-Fi/Bluetooth module (FCC ID: I28-WYSBHVDXP) documented in this filing. The highest reported SAR for body-worn accessory, simultaneous transmission and product-specific (10g extremity SAR) exposure conditions are < 0.10 W/kg, 0.75 W/kg and < 0.10 W/kg, respectively.


TCB Grant - Application 7Oi+XPOnMDL9U3zzKVkdhA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratories Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
 Date of Grant: 01/27/2025

Application Dated: 01/27/2025
Zebra Technologies Corporation
3 Overlook Point
Lincolnshire, IL 60069
 
Attention: Dharmajit Solanki , Principal Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7RE40
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: RFID Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 902.75  -  927.25 0.5272  

Output power listed is conducted. Limited Single Modular Approval for mobile RF Exposure condition. The antenna used with this module must not exceed 6 dBi gain and must be installed to meet the RF exposure compliance separation distance of 25 cm, and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device.

Class II Permissive Change: Integrating pre-certified RFID Module into host ZQ630 as well as co-location separately with WLAN/BT module with FCC ID: I28-WYSBHVDXP and FCC ID: I28MD- FXLAN11AC documented in this filing.


EAS Grant - Application 7Oi+XPOnMDL9U3zzKVkdhA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Zebra Technologies Corporation
3 Overlook Point
Lincolnshire, IL 60069
United States 		  Date of Grant: 01/27/2025

Application Dated: 01/27/2025
 
Attention: Dharmajit Solanki , Principal Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7RE40
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: RFID Module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 902.75  -  927.25 0.5272  

Output power listed is conducted. Limited Single Modular Approval for mobile RF Exposure condition. The antenna used with this module must not exceed 6 dBi gain and must be installed to meet the RF exposure compliance separation distance of 25 cm, and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device.

Class II Permissive Change: Integrating pre-certified RFID Module into host ZQ630 as well as co-location separately with WLAN/BT module with FCC ID: I28-WYSBHVDXP and FCC ID: I28MD- FXLAN11AC documented in this filing.



Mail To: