FCC ID UZ7VC8300

Vehicle computer

by Zebra Technologies Corporation

Grantee Code: UZ7   Product Code: VC8300
Latest application date: 2019-05-13

FCC ID Device Details

FCC IDUZ7VC8300
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeUZ7
Product CodeVC8300
Applicant BusinessZebra Technologies Corporation 🇺🇸
Related Domains zebra.com
Equipment ClassVehicle computer
Test FirmSporton International Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2019-05-13
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2019-05-13
2402-2480 MHzOriginal Equipment2019-04-11
2402-2480 MHzOriginal Equipment2019-04-11
5180-5240 MHzOriginal Equipment2019-04-11

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2019-10-08PDF 2.7 MB
Internal Photos 1Internal Photos2019-10-08PDF 5.3 MB
Internal Photos 10Internal Photos2019-10-08PDF 5.3 MB
Internal Photos 11Internal Photos2019-10-08PDF 5.4 MB
Internal Photos 12Internal Photos2019-10-08PDF 5.2 MB
Internal Photos 13Internal Photos2019-10-08PDF 5.3 MB
Internal Photos 14Internal Photos2019-10-08PDF 5.5 MB
Internal Photos 15Internal Photos2019-10-08PDF 1.3 MB
Internal Photos 2Internal Photos2019-10-08PDF 5.5 MB
Internal Photos 3Internal Photos2019-10-08PDF 5.3 MB
Internal Photos 4Internal Photos2019-10-08PDF 5.5 MB
Internal Photos 5Internal Photos2019-10-08PDF 5.4 MB
Internal Photos 6Internal Photos2019-10-08PDF 5.4 MB
Internal Photos 7Internal Photos2019-10-08PDF 5.5 MB
Internal Photos 8Internal Photos2019-10-08PDF 5.4 MB
Internal Photos 9Internal Photos2019-10-08PDF 5.4 MB
External PhotosExternal Photos2019-10-08PDF 5.2 MB
Label Info.ID Label/Location Info2019-04-11PDF 72.3 KB
Test Setup Photos DTS WIFI 2.4GTest Setup Photos2019-11-09PDF 657.5 KB
Test Setup Photos NII WLAN 5.2G-5.6GTest Setup Photos2019-11-09PDF 581.6 KB
Test Setup Photos NII WLAN 5.8GTest Setup Photos2019-11-09PDF 581.4 KB
Test Setup Photos BT LETest Setup Photos2019-10-08PDF 833.5 KB
Test Setup Photos DFSTest Setup Photos2019-10-08PDF 208.5 KB
Test Setup Photos DSSTest Setup Photos2019-10-08PDF 903.2 KB
Test Setup Photos NII WLAN 5.2G-5.6GTest Setup Photos2019-10-08PDF 871.1 KB
Test Setup Photos NII WLAN 5.8GTest Setup Photos2019-10-08PDF 882.5 KB
Test Setup Photos WLAN 2.4GTest Setup Photos2019-10-08PDF 836.4 KB
Test Report DTS WIFI 2.4GTest Report2019-05-13PDF 5 MB
Test Report NII WLAN 5.2G-5.6G 1Test Report2019-05-13PDF 5.5 MB
Test Report NII WLAN 5.2G-5.6G 2Test Report2019-05-13PDF 5.5 MB
Test Report NII WLAN 5.2G-5.6G 3Test Report2019-05-13PDF 991.4 KB
Test Report NII WLAN 5.8GTest Report2019-05-13PDF 3.2 MB
Test Report DSSTest Report2019-04-11PDF 3.1 MB
Test Report NII DFSTest Report2019-04-11PDF 692.6 KB
Test Report NII WLAN 5.2G-5.6G 1Test Report2019-04-11PDF 5.5 MB
Test Report NII WLAN 5.2G-5.6G 2Test Report2019-04-11PDF 5.5 MB
Test Report NII WLAN 5.2G-5.6G 3Test Report2019-04-11PDF 5.5 MB
Test Report NII WLAN 5.2G-5.6G 4Test Report2019-04-11PDF 5.5 MB
Test Report NII WLAN 5.2G-5.6G 5Test Report2019-04-11PDF 5.5 MB
Test Report NII WLAN 5.2G-5.6G 6Test Report2019-04-11PDF 5.5 MB
Test Report NII WLAN 5.2G-5.6G 7Test Report2019-04-11PDF 4.3 MB
Test Report NII WLAN 5.8G 1Test Report2019-04-11PDF 5.5 MB
Test Report NII WLAN 5.8G 2Test Report2019-04-11PDF 4.3 MB
TestRpt_DTS_BT LETest Report2019-04-11PDF 4.7 MB
TestRpt_DTS_WLAN2.4G_1Test Report2019-04-11PDF 5.5 MB
TestRpt_DTS_WLAN2.4G_2Test Report2019-04-11PDF 5.5 MB
TestRpt_DTS_WLAN2.4G_3Test Report2019-04-11PDF 5.5 MB
TestRpt_DTS_WLAN2.4G_4Test Report2019-04-11PDF 2.3 MB
Cover LetterCover Letter(s)2019-05-13PDF 92.5 KB
Cover LetterCover Letter(s)2019-04-11PDF 81.5 KB
RF ExposureRF Exposure Info2019-05-13PDF 368.4 KB
RF ExposureRF Exposure Info2019-04-11PDF 351.9 KB
Block Diagram Metadata onlyBlock DiagramPDF 189 KB
Schematics Metadata onlySchematicsPDF 1.4 MB
Operational Description Metadata onlyOperational DescriptionPDF 2.7 MB
Operational Description Antenna Metadata onlyOperational DescriptionPDF 928.2 KB
Operational Description Software Security Metadata onlySDR Software/Security InfPDF 224.7 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 1.6 MB
Tune Up Procedure Metadata onlyParts List/Tune Up InfoPDF 220 KB
Tune Up Procedure Metadata onlyParts List/Tune Up InfoPDF 273.5 KB
Tune up Procedure Metadata onlyParts List/Tune Up InfoPDF 273.5 KB

Application Information

Application ID7lPhF9JEd7IfjwefwZlU1Q==
Final Action Date2019-05-13
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0015642663
ModelVC8300
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionVehicle computer
Responsible PartyQianlin Zhou, Regulatory Specialist, Larry.Zhou@zebra.com , 346-260-3543
Test FirmAlex Chen, Sporton International Inc., alex@sporton.com.tw , 88633273456
TCB Emailtei@timcoengr.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date11/09/2019
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is maximum power conducted. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes.

Applications

Application IDDatePurpose
7lPhF9JEd7IfjwefwZlU1Q==2019-05-13Class II permissive change or modification of presently authorized equipment
2eM7NEz0TVNgrHENo8GmSA==2019-05-13Class II permissive change or modification of presently authorized equipment
KyHiNhV2rtSb2Vkq7u1+Jg==2019-04-11Original Equipment
ICfyMerN6pT6gHWE/c6LhQ==2019-04-11Original Equipment
Fw3y5uiBFtnLmGMHBmREZQ==2019-04-11Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.001615CCC
2402-2480 MHz0.002700015CCC
2412-2462 MHz0.606715CCC, MO
5180-5240 MHz0.176215ECC, MO
5260-5320 MHz0.156715ECC, MO
5500-5720 MHz0.211815ECC, MO
5745-5825 MHz0.464515ECC, MO

Grants

TCB Grant - Application KyHiNhV2rtSb2Vkq7u1+Jg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 04/11/2019

Application Dated: 04/10/2019
Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
 
Attention: Qianlin Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7VC8300
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Digital Transmission System
Notes: Vehicle computer
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0016  
CC MO 15C 2412.0  -  2462.0 0.6067  

Power listed is maximum power conducted. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, and 40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application KyHiNhV2rtSb2Vkq7u1+Jg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States
  Date of Grant: 04/11/2019

Application Dated: 04/10/2019
 
Attention: Qianlin Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7VC8300
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Digital Transmission System
Notes: Vehicle computer
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0016  
CC MO 15C 2412.0  -  2462.0 0.6067  

Power listed is maximum power conducted. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, and 40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application ICfyMerN6pT6gHWE/c6LhQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 04/11/2019

Application Dated: 04/10/2019
Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
 
Attention: Qianlin Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7VC8300
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Vehicle computer
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0027  

Power listed is conducted. Professional installation is required. The antennas use for this device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application ICfyMerN6pT6gHWE/c6LhQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States
  Date of Grant: 04/11/2019

Application Dated: 04/10/2019
 
Attention: Qianlin Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7VC8300
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Vehicle computer
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0027  

Power listed is conducted. Professional installation is required. The antennas use for this device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Fw3y5uiBFtnLmGMHBmREZQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 04/11/2019

Application Dated: 04/10/2019
Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
 
Attention: Qianlin Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7VC8300
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Vehicle computer
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.1762  
CC MO 15E 5260.0  -  5320.0 0.1567  
CC MO 15E 5500.0  -  5720.0 0.2118  
CC MO 15E 5745.0  -  5825.0 0.4645  

Power listed is maximum power conducted. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application Fw3y5uiBFtnLmGMHBmREZQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States
  Date of Grant: 04/11/2019

Application Dated: 04/10/2019
 
Attention: Qianlin Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7VC8300
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Vehicle computer
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.1762  
CC MO 15E 5260.0  -  5320.0 0.1567  
CC MO 15E 5500.0  -  5720.0 0.2118  
CC MO 15E 5745.0  -  5825.0 0.4645  

Power listed is maximum power conducted. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 7lPhF9JEd7IfjwefwZlU1Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 05/13/2019

Application Dated: 05/10/2019
Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
 
Attention: Qianlin Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7VC8300
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Vehicle computer
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.1762  
CC MO 15E 5260.0  -  5320.0 0.1567  
CC MO 15E 5500.0  -  5720.0 0.2118  
CC MO 15E 5745.0  -  5825.0 0.4645  

Power listed is maximum power conducted. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 7lPhF9JEd7IfjwefwZlU1Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States
  Date of Grant: 05/13/2019

Application Dated: 05/10/2019
 
Attention: Qianlin Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7VC8300
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Vehicle computer
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.1762  
CC MO 15E 5260.0  -  5320.0 0.1567  
CC MO 15E 5500.0  -  5720.0 0.2118  
CC MO 15E 5745.0  -  5825.0 0.4645  

Power listed is maximum power conducted. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 2eM7NEz0TVNgrHENo8GmSA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 05/13/2019

Application Dated: 05/10/2019
Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
 
Attention: Qianlin Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7VC8300
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Digital Transmission System
Notes: Vehicle computer
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0016  
CC MO 15C 2412.0  -  2462.0 0.6067  

Power listed is maximum power conducted. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, and 40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 2eM7NEz0TVNgrHENo8GmSA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zebra Technologies Corporation
1 Zebra Plaza
Holtsville, NY 11742
United States
  Date of Grant: 05/13/2019

Application Dated: 05/10/2019
 
Attention: Qianlin Zhou , Regulatory Specialist

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZ7VC8300
Name of Grantee:  Zebra Technologies Corporation
Equipment Class: Digital Transmission System
Notes: Vehicle computer
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0016  
CC MO 15C 2412.0  -  2462.0 0.6067  

Power listed is maximum power conducted. Professional installation is required. Device operates with specific antennas in MIMO configurations as described in this filing. The antennas use for this device must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users must be provided with installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, and 40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: