FCC ID V2U-WMR400

DIGITAL TRANSMISSION TRANSCEIVER

by Wilibox Deliberant Group

Grantee Code: V2U   Product Code: WMR400
Latest application date: 2008-07-09

FCC ID Device Details

FCC IDV2U-WMR400
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeV2U
Product CodeWMR400
Applicant BusinessWilibox Deliberant Group 🇺🇸
Related Domains deliberant.net
Equipment ClassDIGITAL TRANSMISSION TRANSCEIVER
Test FirmRogers Labs, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2008-07-09
5180-5240 MHzChange in identification of presently authorized equipment. Original FCC ID: NKRDCMA82 Grant Date: 02/27/20072008-05-16
4942.5-4987.5 MHzChange in identification of presently authorized equipment. Original FCC ID: NKRDCMA82 Grant Date: 07/09/20072008-05-16
2412-2462 MHzChange in identification of presently authorized equipment. Original FCC ID: NKRDCMA82 Grant Date: 02/27/20072008-05-16

Exhibits

DocumentTypeAvailableFile
REVISED USERS MANUALUsers Manual2008-07-09PDF 16.7 KB
SUPERSEDED MANUAL REQUEST LETTERCover Letter(s)2008-07-09PDF 13.4 KB
USERS MANUALUsers Manual2008-07-09PDF 16.7 KB
EXTERNAL PHOTOSExternal Photos2008-07-09PDF 66.3 KB
EXTERNAL PHOTOSExternal Photos2008-05-16PDF 66.3 KB
LABEL SAMPLEID Label/Location Info2008-05-16PDF 54.6 KB
TEST SETUP PHOTOSTest Setup Photos2008-07-09PDF 1.1 MB
TEST REPORTTest Report2008-07-09PDF 187.6 KB
AUTHORIZATION LETTERCover Letter(s)2008-07-09PDF 33.2 KB
SUBMITTAL LETTERCover Letter(s)2008-07-09PDF 13.6 KB
CHANGE IN ID LETTERCover Letter(s)2008-05-16PDF 14 KB
SUBMIT LETTERCover Letter(s)2008-05-16PDF 13.5 KB
RF EXPOSURERF Exposure Info2008-07-09PDF 38 KB

Application Information

Application IDZYl+nKNN1S8XTNs8RQ7IIg==
Final Action Date2008-07-09
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0017415977
Model-WMR400
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionDIGITAL TRANSMISSION TRANSCEIVER
Responsible PartyMatt Hardy, mhardy@deliberant.net , 800.742.9865
Test FirmScot Rogers, Rogers Labs, Inc., rogers@micoks.net , 913-837-3214
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsLimited Single Modular

Applications

Application IDDatePurpose
ZYl+nKNN1S8XTNs8RQ7IIg==2008-07-09Class II permissive change or modification of presently authorized equipment
q9nS263R9QQtRJWx28jKtg==2008-05-16Change in identification of presently authorized equipment. Original FCC ID: NKRDCMA82 Grant Date: 02/27/2007
+Eeh3akeSyGXv2sCz/JxrA==2008-05-16Change in identification of presently authorized equipment. Original FCC ID: NKRDCMA82 Grant Date: 07/09/2007
+DtlZ8lf+aNYitflr1tKNQ==2008-05-16Change in identification of presently authorized equipment. Original FCC ID: NKRDCMA82 Grant Date: 02/27/2007

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
2412-2462 MHz0.36315C
4942.5-4987.5 MHz0.1795ppm4M23G7D9CC
4945-4985 MHz0.2925ppm8M70G7D9CC
4950-4980 MHz0.4765ppm19M2G7D9CC
5180-5240 MHz0.030000015ECC
5745-5825 MHz0.3815C

Grants

TCB Grant - Application ZYl+nKNN1S8XTNs8RQ7IIg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 07/09/2008

Application Dated: 07/09/2008
Wilibox Deliberant Group
1440 Dutch Valley Place
STE 1155
Atlanta, GA 30324
 
Attention: Matt Hardy

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  V2U-WMR400
Name of Grantee:  Wilibox Deliberant Group
Equipment Class: Digital Transmission System
Notes: DIGITAL TRANSMISSION TRANSCEIVER
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 5745.0  -  5825.0 0.38  
15C 2412.0  -  2462.0 0.363  

Output power listed is conducted. Limited Modular Approval for mobile RF Exposure conditions. The end product must be professionally installed on a fixed or permanent structure with a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Marketing to the General Public is prohibited. Approval is limited to OEM integration with final product subject to professional installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators, installers and Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Change: This Class II Change adds additional antennas as described in the filing.
Limited Single Modular

EAS Grant - Application ZYl+nKNN1S8XTNs8RQ7IIg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Wilibox Deliberant Group
1440 Dutch Valley Place STE 1155P.O. Box ,
Atlanta, GA 30324
United States
  Date of Grant: 07/09/2008

Application Dated: 07/09/2008
 
Attention: Matt Hardy

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  V2U-WMR400
Name of Grantee:  Wilibox Deliberant Group
Equipment Class: Digital Transmission System
Notes: DIGITAL TRANSMISSION TRANSCEIVER
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 5745.0  -  5825.0 0.38  
15C 2412.0  -  2462.0 0.363  

Output power listed is conducted. Limited Modular Approval for mobile RF Exposure conditions. The end product must be professionally installed on a fixed or permanent structure with a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Marketing to the General Public is prohibited. Approval is limited to OEM integration with final product subject to professional installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators, installers and Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Class II Change: This Class II Change adds additional antennas as described in the filing.

Limited Single Modular



TCB Grant - Application q9nS263R9QQtRJWx28jKtg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 05/16/2008

Application Dated: 05/16/2008
Wilibox Deliberant Group
1440 Dutch Valley Place
STE 1155
Atlanta, GA 30324
 
Attention: Matt Hardy

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  V2U-WMR400
Name of Grantee:  Wilibox Deliberant Group
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: UNLICENSED NATIONAL INFORMATION INFRASTRUCTURE Tx
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.03  

Output power listed is conducted. Limited Modular Approval for mobile RF Exposure conditions. The end product must be professionally installed on a fixed or permanent structure with a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Marketing to the General Public is prohibited. Approval is limited to OEM integration with final product subject to professional installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators, installers and Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
Limited Single Modular

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application q9nS263R9QQtRJWx28jKtg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Wilibox Deliberant Group
1440 Dutch Valley Place STE 1155P.O. Box ,
Atlanta, GA 30324
United States
  Date of Grant: 05/16/2008

Application Dated: 05/16/2008
 
Attention: Matt Hardy

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  V2U-WMR400
Name of Grantee:  Wilibox Deliberant Group
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: UNLICENSED NATIONAL INFORMATION INFRASTRUCTURE Tx
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.03  

Output power listed is conducted. Limited Modular Approval for mobile RF Exposure conditions. The end product must be professionally installed on a fixed or permanent structure with a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Marketing to the General Public is prohibited. Approval is limited to OEM integration with final product subject to professional installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators, installers and Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.

Limited Single Modular


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application +Eeh3akeSyGXv2sCz/JxrA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 05/16/2008

Application Dated: 05/16/2008
Wilibox Deliberant Group
1440 Dutch Valley Place
STE 1155
Atlanta, GA 30324
 
Attention: Matt Hardy

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  V2U-WMR400
Name of Grantee:  Wilibox Deliberant Group
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: LICENSED NON-BROADCAST STATION
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 90 4950.0  -  4980.0 0.476 5.0  PM 19M2G7D
CC 90 4945.0  -  4985.0 0.292 5.0  PM 8M70G7D
CC 90 4942.5  -  4987.5 0.179 5.0  PM 4M23G7D

Output power listed is conducted. Limited Modular Approval for mobile RF Exposure conditions. The end product must be professionally installed on a fixed or permanent structure with a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Marketing to the General Public is prohibited. Approval is limited to OEM integration with final product subject to professional installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators, installers and Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
Limited Single Modular

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application +Eeh3akeSyGXv2sCz/JxrA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Wilibox Deliberant Group
1440 Dutch Valley Place STE 1155P.O. Box ,
Atlanta, GA 30324
United States
  Date of Grant: 05/16/2008

Application Dated: 05/16/2008
 
Attention: Matt Hardy

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  V2U-WMR400
Name of Grantee:  Wilibox Deliberant Group
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: LICENSED NON-BROADCAST STATION
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 90 4950.0  -  4980.0 0.476 5.0  PM 19M2G7D
CC 90 4945.0  -  4985.0 0.292 5.0  PM 8M70G7D
CC 90 4942.5  -  4987.5 0.179 5.0  PM 4M23G7D

Output power listed is conducted. Limited Modular Approval for mobile RF Exposure conditions. The end product must be professionally installed on a fixed or permanent structure with a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Marketing to the General Public is prohibited. Approval is limited to OEM integration with final product subject to professional installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators, installers and Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.

Limited Single Modular


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application +DtlZ8lf+aNYitflr1tKNQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669
Date of Grant: 05/16/2008

Application Dated: 05/16/2008
Wilibox Deliberant Group
1440 Dutch Valley Place
STE 1155
Atlanta, GA 30324
 
Attention: Matt Hardy

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  V2U-WMR400
Name of Grantee:  Wilibox Deliberant Group
Equipment Class: Digital Transmission System
Notes: DIGITAL TRANSMISSION TRANSCEIVER
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 5745.0  -  5825.0 0.38  
15C 2412.0  -  2462.0 0.363  

Output power listed is conducted. Limited Modular Approval for mobile RF Exposure conditions. The end product must be professionally installed on a fixed or permanent structure with a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Marketing to the General Public is prohibited. Approval is limited to OEM integration with final product subject to professional installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators, installers and Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.
Limited Single Modular

EAS Grant - Application +DtlZ8lf+aNYitflr1tKNQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Wilibox Deliberant Group
1440 Dutch Valley Place STE 1155P.O. Box ,
Atlanta, GA 30324
United States
  Date of Grant: 05/16/2008

Application Dated: 05/16/2008
 
Attention: Matt Hardy

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  V2U-WMR400
Name of Grantee:  Wilibox Deliberant Group
Equipment Class: Digital Transmission System
Notes: DIGITAL TRANSMISSION TRANSCEIVER
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 5745.0  -  5825.0 0.38  
15C 2412.0  -  2462.0 0.363  

Output power listed is conducted. Limited Modular Approval for mobile RF Exposure conditions. The end product must be professionally installed on a fixed or permanent structure with a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Marketing to the General Public is prohibited. Approval is limited to OEM integration with final product subject to professional installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators, installers and Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only.

Limited Single Modular



Mail To: