FCC ID V2V-WMR900
SINGLE MODULAR DIGITAL TRANSMISSION SYSTEM PCMCIA MODULE
by LigoWave LLC
Grantee Code: V2V Product Code: WMR900
Latest application date: 2009-07-14
FCC ID Device Details
| FCC ID | V2V-WMR900 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | V2V |
| Product Code | WMR900 |
| Applicant Business | LigoWave LLC 🇺🇸 |
| Related Domains | |
| Equipment Class | SINGLE MODULAR DIGITAL TRANSMISSION SYSTEM PCMCIA MODULE |
| Test Firm | Advanced Compliance Solutions, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 907-922 MHz | Class II permissive change or modification of presently authorized equipment | 2009-07-14 |
| 907-922 MHz | Change in identification of presently authorized equipment. Original FCC ID: SWX-XR9 Grant Date: 09/13/2007 | 2009-05-07 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2009-05-07 | PDF 162.7 KB |
| Label Sample | ID Label/Location Info | 2009-05-07 | PDF 58.2 KB |
| Test Setup Photos | Test Setup Photos | 2009-07-14 | PDF 2 MB |
| Test Report | Test Report | 2009-07-14 | PDF 63.7 KB |
| Agency Agreement | Cover Letter(s) | 2009-07-14 | PDF 72.7 KB |
| FCC Cover Letter | Cover Letter(s) | 2009-07-14 | PDF 17.2 KB |
| Authorization Letter | Cover Letter(s) | 2009-05-07 | PDF 32.2 KB |
| Change in ID Letter | Cover Letter(s) | 2009-05-07 | PDF 16.5 KB |
| Submittal Letter | Cover Letter(s) | 2009-05-07 | PDF 13.4 KB |
| RF Exposure | RF Exposure Info | 2009-07-14 | PDF 27 KB |
Application Information
| Application ID | ETBeqmi4c3r++zXaHVJYNg== |
|---|---|
| Final Action Date | 2009-07-14 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0017416041 |
| Model | -WMR900 |
| Frequency Range | 907-922 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | SINGLE MODULAR DIGITAL TRANSMISSION SYSTEM PCMCIA MODULE |
| Responsible Party | Simon Chou, General Manager, simonchou@function-g.com |
| Agent | Sam Sam Sam, Advanced Compliance Solutions, Inc., swismer@acstestlab.com |
| Test Firm | Sam Wismer, Advanced Compliance Solutions, Inc., swismer@acstestlab.com |
| TCB Email | jwoods@acstestlab.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Modular approval. Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter is 7dBi gain and must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This Class II Change is to add an additional four antennas as described in this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| ETBeqmi4c3r++zXaHVJYNg== | 2009-07-14 | Class II permissive change or modification of presently authorized equipment |
| ofw2eGNQZCnVcM4p6Uez7g== | 2009-05-07 | Change in identification of presently authorized equipment. Original FCC ID: SWX-XR9 Grant Date: 09/13/2007 |
Equipment Authorization
Grants
TCB Grant - Application ofw2eGNQZCnVcM4p6Uez7g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 05/07/2009 Application Dated: 05/07/2009 |
| LigoWave LLC |
| 138 Mountain Brook Dr |
| Canton, GA 30115 |
| Attention: Simon Chou , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | V2V-WMR900 |
| Name of Grantee: | LigoWave LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | SINGLE MODULAR DIGITAL TRANSMISSION SYSTEM PCMCIA MODULE |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 907.0 - 922.0 | 0.758 | 9M92D7D | ||
| 15C | 907.0 - 922.0 | 0.794 | 4M04D7D | ||
| 15C | 907.0 - 922.0 | 0.794 | 8M20D7D | ||
| 15C | 907.0 - 922.0 | 0.794 | 16M2D7D |
| Modular approval. Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter is 7dBi gain and must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application ofw2eGNQZCnVcM4p6Uez7g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LigoWave LLC 138 Mountain Brook Dr Canton, GA 30115 United States |
Date of Grant: 05/07/2009 Application Dated: 05/07/2009 |
| Attention: Simon Chou , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | V2V-WMR900 |
| Name of Grantee: | LigoWave LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | SINGLE MODULAR DIGITAL TRANSMISSION SYSTEM PCMCIA MODULE |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 907.0 - 922.0 | 0.758 | 9M92D7D | ||
| 15C | 907.0 - 922.0 | 0.794 | 4M04D7D | ||
| 15C | 907.0 - 922.0 | 0.794 | 8M20D7D | ||
| 15C | 907.0 - 922.0 | 0.794 | 16M2D7D |
| Modular approval. Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter is 7dBi gain and must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Advanced Compliance Solutions, Inc. 5015 B.U. Bowman Drive Buford, GA 30518 |
Date of Grant: 07/14/2009 Application Dated: 07/14/2009 |
| LigoWave LLC |
| 138 Mountain Brook Dr |
| Canton, GA 30115 |
| Attention: Simon Chou , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | V2V-WMR900 |
| Name of Grantee: | LigoWave LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | SINGLE MODULAR DIGITAL TRANSMISSION SYSTEM PCMCIA MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 907.0 - 922.0 | 0.758 | 9M92D7D | ||
| 15C | 907.0 - 922.0 | 0.794 | 4M04D7D | ||
| 15C | 907.0 - 922.0 | 0.794 | 8M20D7D | ||
| 15C | 907.0 - 922.0 | 0.794 | 16M2D7D |
| Modular approval. Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter is 7dBi gain and must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This Class II Change is to add an additional four antennas as described in this filing. |
EAS Grant - Application ETBeqmi4c3r++zXaHVJYNg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
LigoWave LLC 138 Mountain Brook Dr Canton, GA 30115 United States |
Date of Grant: 07/14/2009 Application Dated: 07/14/2009 |
| Attention: Simon Chou , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | V2V-WMR900 |
| Name of Grantee: | LigoWave LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | SINGLE MODULAR DIGITAL TRANSMISSION SYSTEM PCMCIA MODULE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 907.0 - 922.0 | 0.758 | 9M92D7D | ||
| 15C | 907.0 - 922.0 | 0.794 | 4M04D7D | ||
| 15C | 907.0 - 922.0 | 0.794 | 8M20D7D | ||
| 15C | 907.0 - 922.0 | 0.794 | 16M2D7D |
| Modular approval. Power output listed is conducted. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter is 7dBi gain and must be installed to provide a separation distance of at least 23 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This Class II Change is to add an additional four antennas as described in this filing. |
| Mail To: |