FCC ID V3DR8002
Bluetooth Module
by RIOTEC CO.,LTD
Grantee Code: V3D Product Code: R8002
Latest application date: 2022-12-13
FCC ID Device Details
| FCC ID | V3DR8002 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | V3D |
| Product Code | R8002 |
| Applicant Business | RIOTEC CO.,LTD 🇹🇼 |
| Related Domains |  riotec.com.tw |
| Equipment Class | Bluetooth Module |
| Test Firm | Central Research Technology Co. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2022-12-13 |
| 2402-2480 MHz | Original Equipment | 2022-12-13 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2022-12-13 | PDF 2.7 MB |
| Internal Photos | Internal Photos | 2022-12-13 | PDF 226.2 KB |
| External Photos | External Photos | 2022-12-13 | PDF 177.5 KB |
| ID Label and Location | ID Label/Location Info | 2022-12-13 | PDF 98.1 KB |
| Test Setup Photos | Test Setup Photos | 2022-12-13 | PDF 246.2 KB |
| Test Report_Antenna | Test Report | 2022-12-13 | PDF 5.5 MB |
| Test Report_DSS | Test Report | 2022-12-13 | PDF 1,008.6 KB |
| Test Report_DTS | Test Report | 2022-12-13 | PDF 637.1 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2022-12-13 | PDF 126.9 KB |
| Modular Approval Request | Cover Letter(s) | 2022-12-13 | PDF 261.7 KB |
| POA | Cover Letter(s) | 2022-12-13 | PDF 90.4 KB |
| RF Exposure Information | RF Exposure Info | 2022-12-13 | PDF 125.3 KB |
| Block Diagram Metadata only | Block Diagram | PDF 120.3 KB | |
| Schematics Metadata only | Schematics | PDF 1.1 MB | |
| Operational Description Metadata only | Operational Description | PDF 90.7 KB |
Application Information
| Application ID | au7VU2LBFVnMcZm+wJU/FQ== |
|---|---|
| Final Action Date | 2022-12-13 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0017441239 |
| Model | R8002 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Bluetooth Module |
| Responsible Party | Ken Tian, kentian@riotec.com.tw , +886-28647-1828 |
| Test Firm | Jim CHIEN, Central Research Technology Co., jim@crc-lab.com  , 886-2-25872719 |
| TCB Email | vina.kerai@nemko.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| au7VU2LBFVnMcZm+wJU/FQ== | 2022-12-13 | Original Equipment |
| KVlZO5mN/7q8ye+l2XN/9A== | 2022-12-13 | Original Equipment |
Grants
TCB Grant - Application KVlZO5mN/7q8ye+l2XN/9A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 12/13/2022 Application Dated: 12/13/2022 |
| RIOTEC CO.,LTD |
| 8F,No. 196-2, Ta-Tung Rd., Sec. 3, His-Chih |
| Taipei, 221 Taiwan |
| Attention: Ken Tian |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | V3DR8002 |
| Name of Grantee: | RIOTEC CO.,LTD |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.001 |
| Single Modular Approval. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application KVlZO5mN/7q8ye+l2XN/9A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
RIOTEC CO.,LTD 8F,No. 196-2, Ta-Tung Rd., Sec. 3, His-Chih Taipei, 221 Taiwan |
Date of Grant: 12/13/2022 Application Dated: 12/13/2022 |
| Attention: Ken Tian |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | V3DR8002 |
| Name of Grantee: | RIOTEC CO.,LTD |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.001 |
| Single Modular Approval. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 12/13/2022 Application Dated: 12/13/2022 |
| RIOTEC CO.,LTD |
| 8F,No. 196-2, Ta-Tung Rd., Sec. 3, His-Chih |
| Taipei, 221 Taiwan |
| Attention: Ken Tian |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | V3DR8002 |
| Name of Grantee: | RIOTEC CO.,LTD |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.001 |
| Single Modular Approval. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application au7VU2LBFVnMcZm+wJU/FQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
RIOTEC CO.,LTD 8F,No. 196-2, Ta-Tung Rd., Sec. 3, His-Chih Taipei, 221 Taiwan |
Date of Grant: 12/13/2022 Application Dated: 12/13/2022 |
| Attention: Ken Tian |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | V3DR8002 |
| Name of Grantee: | RIOTEC CO.,LTD |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.001 |
| Single Modular Approval. Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter, except in accordance with FCC multi-transmitter product procedures. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |