1. FCC ID
  2. V65
  3. V65E4100

FCC ID V65E4100

Dual-Band CDMA Phone

by Kyocera Corporation

Grantee Code: V65   Product Code: E4100
Latest application date: 2010-11-08

FCC ID Device Details

FCC IDV65E4100
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeV65
Product CodeE4100
Applicant BusinessKyocera Corporation 🇺🇸
Related Domains kyocera.com
Equipment ClassDual-Band CDMA Phone
Test FirmCompliance Certification Services

Hearing Aid Compatibility

Handset MakerKyocera
Model NameE4100
Air Interface TechnologiesCDMA, CDMA
Operating Frequency Bands800, 1900
M-RatingM4
M-Rating Certification Date11/08/10
M-Rating ANSI Version2007
T-RatingT4
T-Rating Certification Date11/08/10
T-Rating ANSI Version2007
Wi-Fi InterfaceN

Source: FCC archived Device Manufacturer Summary Reports (2011-2012).

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2010-11-08
824.7-848.31 MHzOriginal Equipment2010-11-08

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2011-03-27PDF 2.1 MB
IntInternal Photos2011-03-27PDF 945.1 KB
Int PicsInternal Photos2011-03-27PDF 945.1 KB
ExtExternal Photos2011-03-27PDF 215.7 KB
Ext PicsExternal Photos2011-03-27PDF 215.7 KB
LabelID Label/Location Info2010-11-08PDF 736.3 KB
Label InfoID Label/Location Info2010-11-08PDF 736.3 KB
EMC SetupTest Setup Photos2011-03-27PDF 138.8 KB
HAC RF SetupTest Setup Photos2011-03-27PDF 103.2 KB
HAC T Coil SetupTest Setup Photos2011-03-27PDF 121.3 KB
SAR SetupTest Setup Photos2011-03-27PDF 183.9 KB
Test SetupTest Setup Photos2011-03-27PDF 296 KB
BT ConductedTest Report2010-11-08PDF 578.8 KB
BT RadiatedTest Report2010-11-08PDF 650.6 KB
HAC ProbeTest Report2010-11-08PDF 834.6 KB
HAC RFTest Report2010-11-08PDF 212.1 KB
HAC RF PlotsTest Report2010-11-08PDF 334.6 KB
HAC RF ValidationTest Report2010-11-08PDF 100.7 KB
HAC T CoilTest Report2010-11-08PDF 797.9 KB
HAC T Coil CalTest Report2010-11-08PDF 326.4 KB
HAC T Coil PlotsTest Report2010-11-08PDF 300.4 KB
SAR ReportRF Exposure Info2010-11-08PDF 597.3 KB
Test Report 1 RadiatedTest Report2010-11-08PDF 257.8 KB
Test Report 2 RadiatedTest Report2010-11-08PDF 459.3 KB
Test Report ConductedTest Report2010-11-08PDF 449.8 KB
MEID AttestationCover Letter(s)2010-11-08PDF 23.2 KB
Authorization 1Cover Letter(s)2010-11-08PDF 25.5 KB
Authorization 2Cover Letter(s)2010-11-08PDF 29.8 KB
Authorization Letter 1Cover Letter(s)2010-11-08PDF 25.5 KB
Authorization Letter 2Cover Letter(s)2010-11-08PDF 29.8 KB
Confid RequestCover Letter(s)2010-11-08PDF 23.1 KB
MEIDCover Letter(s)2010-11-08PDF 23.2 KB
STC RequestCover Letter(s)2010-11-08PDF 23.1 KB
Body PlotsRF Exposure Info2010-11-08PDF 150.9 KB
Dipole CertRF Exposure Info2010-11-08PDF 1.8 MB
Hesd PlotsRF Exposure Info2010-11-08PDF 303.3 KB
Probe CertRF Exposure Info2010-11-08PDF 1.5 MB
ValidationRF Exposure Info2010-11-08PDF 198.2 KB

Application Information

Application IDc6pKOsbsB38pSlOa2rgLKA==
Final Action Date2010-11-08
Application PurposeOriginal Equipment
Applicant FRN0017617366
ModelE4100
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionDual-Band CDMA Phone
Responsible PartyDouglas Dunn, Director of Regulatory Affairs, doug.dunn@kyocera.com , 858-882-2117
Technical ContactTru Chan, Compliance Certification Services, tru.chan@ccsemc.com , 510 661 1000
Test FirmThu Chan, Compliance Certification Services, thu.chan@ccsemc.com , 510-771-1122
TCB Emailcertnotice@ccsemc.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date03/27/2011
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is Conducted. The antenna used for this transmitter is co-located with a Licensed radio transceiver. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
c6pKOsbsB38pSlOa2rgLKA==2010-11-08Original Equipment
ASwyn49KPRRFhbxFvoDElQ==2010-11-08Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
824.7-848.31 MHz0.6922.5ppm1M25F9W22HBC, HC
1851.25-1908.75 MHz1.292.5ppm1M25F9W24EBC, HC
2402-2480 MHz0.001700015C

Grants

TCB Grant - Application c6pKOsbsB38pSlOa2rgLKA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
 Date of Grant: 11/08/2010

Application Dated: 11/07/2010
Kyocera Corporation
9520 Towne Centre Drive, Suite 200
San Diego, CA 92121
 
Attention: Douglas Dunn , Director of Regulatory Affairs

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  V65E4100
Name of Grantee:  Kyocera Corporation
Equipment Class: Digital Transmission System
Notes: Dual-Band CDMA Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2402.0  -  2480.0 0.0017  

Power Output listed is Conducted. The antenna used for this transmitter is co-located with a Licensed radio transceiver. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application c6pKOsbsB38pSlOa2rgLKA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Kyocera Corporation
9520 Towne Centre Drive, Suite 200
San Diego, CA 92121
United States 		  Date of Grant: 11/08/2010

Application Dated: 11/07/2010
 
Attention: Douglas Dunn , Director of Regulatory Affairs

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  V65E4100
Name of Grantee:  Kyocera Corporation
Equipment Class: Digital Transmission System
Notes: Dual-Band CDMA Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2402.0  -  2480.0 0.0017  

Power Output listed is Conducted. The antenna used for this transmitter is co-located with a Licensed radio transceiver. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application ASwyn49KPRRFhbxFvoDElQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
 Date of Grant: 11/08/2010

Application Dated: 11/07/2010
Kyocera Corporation
9520 Towne Centre Drive, Suite 200
San Diego, CA 92121
 
Attention: Douglas Dunn , Director of Regulatory Affairs

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  V65E4100
Name of Grantee:  Kyocera Corporation
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Dual-Band CDMA Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC HC 22H 824.7  -  848.31 0.692 2.5  PM 1M25F9W
BC HC 24E 1851.25  -  1908.75 1.29 2.5  PM 1M25F9W

This device contains functions that are not operational in U.S. Territories. This filing is only applicable for Licensed operations.

Power Output is ERP for Part 22 and EIRP for Part 24. SAR compliance for body-worn operating conditions is limited to the specific configuration tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 22mm separation between the device and the user's body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values are: Part 22: Head: 0.41W/kg; Body-worn: 0.53W/kg; Part 24: Head: 0.61W/kg; Body-worn: 0.43W/kg

HAC Rating: M4 T4 - 2007


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
HC: This equipment complies with the hearing aid compatibility technical requirements of Section 20.19 of the rules.

EAS Grant - Application ASwyn49KPRRFhbxFvoDElQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Kyocera Corporation
9520 Towne Centre Drive, Suite 200
San Diego, CA 92121
United States 		  Date of Grant: 11/08/2010

Application Dated: 11/07/2010
 
Attention: Douglas Dunn , Director of Regulatory Affairs

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  V65E4100
Name of Grantee:  Kyocera Corporation
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Dual-Band CDMA Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BC HC 22H 824.7  -  848.31 0.692 2.5  PM 1M25F9W
BC HC 24E 1851.25  -  1908.75 1.29 2.5  PM 1M25F9W

This device contains functions that are not operational in U.S. Territories. This filing is only applicable for Licensed operations.

Power Output is ERP for Part 22 and EIRP for Part 24. SAR compliance for body-worn operating conditions is limited to the specific configuration tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 22mm separation between the device and the user's body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values are: Part 22: Head: 0.41W/kg; Body-worn: 0.53W/kg; Part 24: Head: 0.61W/kg; Body-worn: 0.43W/kg

HAC Rating: M4 T4 - 2007


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
HC: This equipment complies with the hearing aid compatibility technical requirements of Section 20.19 of the rules.

Mail To: