Power listed is conducted. For body-worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the handset a minimum of 1cm from the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, product specific (wireless router), and simultaneous transmission conditions are 0.15W/kg,TCB Grant - Application uJmXQ1yf9AlxKnQiYnNjwQ==
| TCB |
GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification |
| Issued Under the Authority of the |
| Federal Communications Commission |
| By: |
|
|
Timco Engineering, Inc.
849 NW State Road 45
<BR>P.O. Box 370,
Newberry, FL 32669
|
Date of Grant: 01/11/2013
Application Dated: 12/24/2012
|
| Kyocera Corporation |
| 9520 Towne Centre Drive, Suite 200 |
San Diego, CA 92121
|
| |
| Attention: Douglas Dunn , Director of Regulatory Affairs |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
V65E6710 |
|
|
| Name of Grantee: |
Kyocera Corporation |
|
|
| Equipment Class: |
Part 15 Low Power Communication Device Transmitter |
| Notes: |
PDA PHONE |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
| CC |
15C |
13.56
-
13.56
|
|
|
|
| CC: |
This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application uJmXQ1yf9AlxKnQiYnNjwQ==
| COPY |
FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
Kyocera Corporation
9520 Towne Centre Drive, Suite 200
San Diego, CA 92121
United States
|
|
Date of Grant: 01/11/2013
Application Dated: 12/24/2012
|
| |
| Attention: Douglas Dunn , Director of Regulatory Affairs |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
V65E6710 |
|
|
| Name of Grantee: |
Kyocera Corporation |
|
|
| Equipment Class: |
Part 15 Low Power Communication Device Transmitter |
| Notes: |
PDA PHONE |
| Modular Type: |
Does not apply |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
| CC |
15C |
13.56
-
13.56
|
|
|
|
| CC: |
This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |
|
|
|
|
|
TCB Grant - Application 2u5B/UxaozRnK0jJ5cAy6A==
| TCB |
GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification |
| Issued Under the Authority of the |
| Federal Communications Commission |
| By: |
|
|
Timco Engineering, Inc.
849 NW State Road 45
<BR>P.O. Box 370,
Newberry, FL 32669
|
Date of Grant: 01/11/2013
Application Dated: 12/24/2012
|
| Kyocera Corporation |
| 9520 Towne Centre Drive, Suite 200 |
San Diego, CA 92121
|
| |
| Attention: Douglas Dunn , Director of Regulatory Affairs |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
V65E6710 |
|
|
| Name of Grantee: |
Kyocera Corporation |
|
|
| Equipment Class: |
PCS Licensed Transmitter held to ear |
| Notes: |
PDA PHONE |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
| HC |
22H |
824.7
-
848.31
|
0.089
|
0.01
PM
|
1M26F9W
|
| HC |
24E |
1851.3
-
1908.8
|
0.169
|
0.004
PM
|
1M26F9W
|
| HX |
24E |
1852.5
-
1912.5
|
0.124
|
0.008
PM
|
4M49G7D
|
| HX |
24E |
1852.5
-
1912.5
|
0.124
|
0.008
PM
|
4M49W7D
|
| HX |
24E |
1855.0
-
1910.0
|
0.113
|
0.008
PM
|
8M93G7D
|
| HX |
24E |
1855.0
-
1910.0
|
0.113
|
0.008
PM
|
8M93W7D
|
| HC |
90 |
817.9
-
823.1
|
0.069
|
0.01
PM
|
1M26F9W
|
| Power listed is ERP for part 22/90 and EIRP for part 24. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the handset a minimum of 1cm from the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, product specific (wireless router), and simultaneous transmission conditions are 0.94W/kg, 0.73W/kg, 0.84W/kg, and 1.07W/kg, respectively. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations. HAC Ratings: M4 T3 2007 |
| HC: |
This equipment complies with the hearing aid compatibility technical requirements of Section 20.19 of the rules. |
| HX: |
This mode of operation has the means to permit held to the ear telephone calls but has not been tested for hearing aid compatibility. The device supports other modes which have been found to be compliant with the HAC rules. |
EAS Grant - Application 2u5B/UxaozRnK0jJ5cAy6A==
| COPY |
FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
Kyocera Corporation
9520 Towne Centre Drive, Suite 200
San Diego, CA 92121
United States
|
|
Date of Grant: 01/11/2013
Application Dated: 12/24/2012
|
| |
| Attention: Douglas Dunn , Director of Regulatory Affairs |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
V65E6710 |
|
|
| Name of Grantee: |
Kyocera Corporation |
|
|
| Equipment Class: |
PCS Licensed Transmitter held to ear |
| Notes: |
PDA PHONE |
| Modular Type: |
Does not apply |
| Grant Notes
| FCC Rule Parts
| Frequency Range (MHZ)
| Output Watts
| Frequency Tolerance
| Emission Designator
|
| HC |
22H |
824.7
-
848.31
|
0.089
|
0.01
PM
|
1M26F9W
|
| HC |
24E |
1851.3
-
1908.8
|
0.169
|
0.004
PM
|
1M26F9W
|
| HX |
24E |
1852.5
-
1912.5
|
0.124
|
0.008
PM
|
4M49G7D
|
| HX |
24E |
1852.5
-
1912.5
|
0.124
|
0.008
PM
|
4M49W7D
|
| HX |
24E |
1855.0
-
1910.0
|
0.113
|
0.008
PM
|
8M93G7D
|
| HX |
24E |
1855.0
-
1910.0
|
0.113
|
0.008
PM
|
8M93W7D
|
| HC |
90 |
817.9
-
823.1
|
0.069
|
0.01
PM
|
1M26F9W
|
| Power listed is ERP for part 22/90 and EIRP for part 24. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the handset a minimum of 1cm from the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values for head, body-worn accessory, product specific (wireless router), and simultaneous transmission conditions are 0.94W/kg, 0.73W/kg, 0.84W/kg, and 1.07W/kg, respectively. This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations. HAC Ratings: M4 T3 2007 |
| HC: |
This equipment complies with the hearing aid compatibility technical requirements of Section 20.19 of the rules. |
| HX: |
This mode of operation has the means to permit held to the ear telephone calls but has not been tested for hearing aid compatibility. The device supports other modes which have been found to be compliant with the HAC rules. |
|