FCC ID V7TAC15

AC1900 Smart Dual-Band Gigabit WiFi Router

by SHENZHEN TENDA TECHNOLOGY CO., LTD.

Grantee Code: V7T   Product Code: AC15
Latest application date: 2015-08-20

FCC ID Device Details

FCC IDV7TAC15
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeV7T
Product CodeAC15
Applicant BusinessSHENZHEN TENDA TECHNOLOGY CO., LTD. 🇨🇳
Related Domains tenda.cn newbtl.com
Equipment ClassAC1900 Smart Dual-Band Gigabit WiFi Router
Test FirmBTL Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2015-08-20
5180-5240 MHzOriginal Equipment2015-08-20

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2015-08-20PDF 3.4 MB
Internal photoInternal Photos2015-08-20PDF 846.5 KB
External photoExternal Photos2015-08-20PDF 349 KB
ID label/Location infoID Label/Location Info2015-08-20PDF 246.3 KB
Test setup photoTest Setup Photos2015-08-20PDF 1.3 MB
Test Report_2.4GTest Report2015-08-20PDF 4.9 MB
Test Report_band 1+4 part 1Test Report2015-08-20PDF 4.1 MB
Test Report_band 1+4 part 2Test Report2015-08-20PDF 5.6 MB
Declaration of authorizationCover Letter(s)2015-08-20PDF 122 KB
FCC DOCCover Letter(s)2015-08-20PDF 3.4 MB
Request for non-disclosureCover Letter(s)2015-08-20PDF 290.6 KB
FCC RF Exposure InfoRF Exposure Info2015-08-20PDF 47.6 KB
Block diagram Metadata onlyBlock DiagramPDF 363.9 KB
Schematics Metadata onlySchematicsPDF 2.2 MB
Operational description Metadata onlyOperational DescriptionPDF 7.2 KB
software security Metadata onlyOperational DescriptionPDF 80 KB

Application Information

Application IDtfAfPgn6P7k+mqjYLxArbw==
Final Action Date2015-08-20
Application PurposeOriginal Equipment
Applicant FRN0017645623
ModelAC15
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionAC1900 Smart Dual-Band Gigabit WiFi Router
Responsible PartyShen Yue, Engineer, cert@tenda.cn , 86-755-27657098
AgentCathy Cathy Cathy, BTL Inc., cathy@newbtl.com , 86-769-83183000
Technical ContactSteven Lu, BTL Inc., steven@newbtl.com , 86-769-83183000
Non-Technical ContactCathy Wang, BTL Inc., cathy@newbtl.com , 86-769-83183000
Test FirmDaisy Dai, BTL Inc., daisy.dai@newbtl.org.cn , 8676983183000
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes.

Applications

Application IDDatePurpose
tfAfPgn6P7k+mqjYLxArbw==2015-08-20Original Equipment
TMK7ihq2nlxKavKoJ1WU3Q==2015-08-20Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.840000015CCC, MO
5180-5240 MHz0.1315E38, CC, MO
5745-5825 MHz0.0715E38, CC, MO

Grants

TCB Grant - Application TMK7ihq2nlxKavKoJ1WU3Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 08/20/2015

Application Dated: 08/20/2015
SHENZHEN TENDA TECHNOLOGY CO., LTD.
6-8 Floor, Tower E3,
No. 1001, Zhongshanyuan Road,Nanshan District,
Shenzhen, 518052
China
 
Attention: Shen Yue , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  V7TAC15
Name of Grantee:  SHENZHEN TENDA TECHNOLOGY CO., LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: AC1900 Smart Dual-Band Gigabit WiFi Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.13  
38 CC MO 15E 5745.0  -  5825.0 0.07  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20/40/80 MHz bandwidth modes.

The 80 MHz mode is limited to channel at 5210MHz and 5775 MHz.

Operations in 5150-5250 MHz band is for indoor use only.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application TMK7ihq2nlxKavKoJ1WU3Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

SHENZHEN TENDA TECHNOLOGY CO., LTD.
6-8 Floor, Tower E3, No. 1001, Zhongshanyuan Road,Nanshan District,
Shenzhen, 518052
China
  Date of Grant: 08/20/2015

Application Dated: 08/20/2015
 
Attention: Shen Yue , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  V7TAC15
Name of Grantee:  SHENZHEN TENDA TECHNOLOGY CO., LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: AC1900 Smart Dual-Band Gigabit WiFi Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.13  
38 CC MO 15E 5745.0  -  5825.0 0.07  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20/40/80 MHz bandwidth modes.

The 80 MHz mode is limited to channel at 5210MHz and 5775 MHz.

Operations in 5150-5250 MHz band is for indoor use only.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application tfAfPgn6P7k+mqjYLxArbw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 08/20/2015

Application Dated: 08/20/2015
SHENZHEN TENDA TECHNOLOGY CO., LTD.
6-8 Floor, Tower E3,
No. 1001, Zhongshanyuan Road,Nanshan District,
Shenzhen, 518052
China
 
Attention: Shen Yue , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  V7TAC15
Name of Grantee:  SHENZHEN TENDA TECHNOLOGY CO., LTD.
Equipment Class: Digital Transmission System
Notes: AC1900 Smart Dual-Band Gigabit WiFi Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.84  

Output power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20/40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application tfAfPgn6P7k+mqjYLxArbw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

SHENZHEN TENDA TECHNOLOGY CO., LTD.
6-8 Floor, Tower E3, No. 1001, Zhongshanyuan Road,Nanshan District,
Shenzhen, 518052
China
  Date of Grant: 08/20/2015

Application Dated: 08/20/2015
 
Attention: Shen Yue , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  V7TAC15
Name of Grantee:  SHENZHEN TENDA TECHNOLOGY CO., LTD.
Equipment Class: Digital Transmission System
Notes: AC1900 Smart Dual-Band Gigabit WiFi Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.84  

Output power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20/40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: