FCC ID V7TAC19

AC1200 Dual Band Gigabit WiFi Router

by SHENZHEN TENDA TECHNOLOGY CO., LTD.

Grantee Code: V7T   Product Code: AC19
Latest application date: 2020-03-10

FCC ID Device Details

FCC IDV7TAC19
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeV7T
Product CodeAC19
Applicant BusinessSHENZHEN TENDA TECHNOLOGY CO., LTD. 🇨🇳
Related Domains tenda.cn
Equipment ClassAC1200 Dual Band Gigabit WiFi Router
Test FirmBTL Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2020-03-10
2412-2462 MHzOriginal Equipment2020-03-10

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2020-03-10PDF 995.8 KB
Internal photosInternal Photos2020-03-10PDF 978.4 KB
External photosExternal Photos2020-03-10PDF 497.3 KB
Label and label locationID Label/Location Info2020-03-10PDF 477.8 KB
Test setup photosTest Setup Photos2020-03-10PDF 564.8 KB
Test Report 2G4WLANTest Report2020-03-10PDF 5.6 MB
Test Report 5GWLAN part 1Test Report2020-03-10PDF 3.9 MB
Test Report 5GWLAN part 2Test Report2020-03-10PDF 2.5 MB
Authorization letter of applicationCover Letter(s)2020-03-10PDF 59.6 KB
Confidentiality request letterCover Letter(s)2020-03-10PDF 83.2 KB
Letter of declaration disable channel 12 and 13 by softwareCover Letter(s)2020-03-10PDF 124.5 KB
RF exposure evaluationRF Exposure Info2020-03-10PDF 230.1 KB
Block diagram Metadata onlyBlock DiagramPDF 87.7 KB
Schematic Metadata onlySchematicsPDF 292.4 KB
Letter of declaration software security requirement Metadata onlyOperational DescriptionPDF 816.2 KB
Letter of declaration unii device Metadata onlyOperational DescriptionPDF 101.9 KB
Operation description Metadata onlyOperational DescriptionPDF 104.4 KB

Application Information

Application IDjiSypSbkWnPC+1F9j1uMoQ==
Final Action Date2020-03-10
Application PurposeOriginal Equipment
Applicant FRN0017645623
ModelAC19
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionAC1200 Dual Band Gigabit WiFi Router
Responsible PartyShen Yue, Engineer, cert@tenda.cn , 86-755-27657098
Test FirmSophia Huang, BTL Inc., Sophia.huang@newbtl.com , +86-769-83183000
TCB Emailtcb-essen@cetecom.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput Power listed is average conducted. This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode. Device operates with specific antennas in 4x4 MIMO configurations as described in this filing. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
jiSypSbkWnPC+1F9j1uMoQ==2020-03-10Original Equipment
7b0eTojQvKibPsARH1aDGA==2020-03-10Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.955000015CCC, MO
5180-5240 MHz0.412115ECC, MO
5745-5825 MHz0.687115ECC, MO

Grants

TCB Grant - Application jiSypSbkWnPC+1F9j1uMoQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM GmbH
Im Teelbruch 116
45219 Essen,
Germany
Date of Grant: 03/10/2020

Application Dated: 03/10/2020
SHENZHEN TENDA TECHNOLOGY CO., LTD.
6-8 Floor, Tower E3,
No. 1001, Zhongshanyuan Road,Nanshan District,
Shenzhen, 518052
China
 
Attention: Shen Yue , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  V7TAC19
Name of Grantee:  SHENZHEN TENDA TECHNOLOGY CO., LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: AC1200 Dual Band Gigabit WiFi Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.4121  
CC MO 15E 5745.0  -  5825.0 0.6871  

Output Power listed is average conducted.

This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode.

Device operates with specific antennas in 4x4 MIMO configurations as described in this filing.

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits.

End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application jiSypSbkWnPC+1F9j1uMoQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

SHENZHEN TENDA TECHNOLOGY CO., LTD.
6-8 Floor, Tower E3, No. 1001, Zhongshanyuan Road,Nanshan District,
Shenzhen, 518052
China
  Date of Grant: 03/10/2020

Application Dated: 03/10/2020
 
Attention: Shen Yue , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  V7TAC19
Name of Grantee:  SHENZHEN TENDA TECHNOLOGY CO., LTD.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: AC1200 Dual Band Gigabit WiFi Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.4121  
CC MO 15E 5745.0  -  5825.0 0.6871  

Output Power listed is average conducted.

This device supports 802.11a, 802.11n and 802.11ac with a 20 MHz, 40 MHz and 80 MHz bandwidth mode.

Device operates with specific antennas in 4x4 MIMO configurations as described in this filing.

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits.

End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 7b0eTojQvKibPsARH1aDGA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  CETECOM GmbH
Im Teelbruch 116
45219 Essen,
Germany
Date of Grant: 03/10/2020

Application Dated: 03/10/2020
SHENZHEN TENDA TECHNOLOGY CO., LTD.
6-8 Floor, Tower E3,
No. 1001, Zhongshanyuan Road,Nanshan District,
Shenzhen, 518052
China
 
Attention: Shen Yue , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  V7TAC19
Name of Grantee:  SHENZHEN TENDA TECHNOLOGY CO., LTD.
Equipment Class: Digital Transmission System
Notes: AC1200 Dual Band Gigabit WiFi Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.955  

Output Power listed is peak conducted.

This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode.

Device operates with specific antennas in 2x3 MIMO configurations as described in this filing.

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits.

End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 7b0eTojQvKibPsARH1aDGA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

SHENZHEN TENDA TECHNOLOGY CO., LTD.
6-8 Floor, Tower E3, No. 1001, Zhongshanyuan Road,Nanshan District,
Shenzhen, 518052
China
  Date of Grant: 03/10/2020

Application Dated: 03/10/2020
 
Attention: Shen Yue , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  V7TAC19
Name of Grantee:  SHENZHEN TENDA TECHNOLOGY CO., LTD.
Equipment Class: Digital Transmission System
Notes: AC1200 Dual Band Gigabit WiFi Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.955  

Output Power listed is peak conducted.

This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode.

Device operates with specific antennas in 2x3 MIMO configurations as described in this filing.

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits.

End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: