FCC ID V7TDH301

Wireless N300 ADSL2+ High Power Modem Router & DH301

by SHENZHEN TENDA TECHNOLOGY CO., LTD.

Grantee Code: V7T   Product Code: DH301
Latest application date: 2016-04-12

FCC ID Device Details

FCC IDV7TDH301
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeV7T
Product CodeDH301
Applicant BusinessSHENZHEN TENDA TECHNOLOGY CO., LTD. 🇨🇳
Related Domains tenda.cn
Equipment ClassWireless N300 ADSL2+ High Power Modem Router & DH301
Test FirmBay Area Compliance Laboratories Corp. (Dongguan)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2016-04-12
2412-2462 MHzOriginal Equipment2015-03-05

Exhibits

DocumentTypeAvailableFile
User Manual Part IIUsers Manual2015-03-05PDF 1.7 MB
Users Manual Part IUsers Manual2015-03-05PDF 3.9 MB
Int PhotosInternal Photos2015-03-05PDF 246.9 KB
Ext PhotosExternal Photos2016-04-12PDF 422.1 KB
Ext PhotosExternal Photos2015-03-05PDF 425.9 KB
FCC ID LabelID Label/Location Info2015-03-05PDF 85.2 KB
Setup PhotosTest Setup Photos2015-03-05PDF 250.5 KB
Test ReportTest Report2016-04-12PDF 672.7 KB
Test ReportTest Report2015-03-05PDF 2.2 MB
CIIPC LetterCover Letter(s)2016-04-12PDF 180.8 KB
POACover Letter(s)2016-04-12PDF 226.4 KB
Confidentiality LetterCover Letter(s)2015-03-05PDF 243.5 KB
POACover Letter(s)2015-03-05PDF 224.5 KB
RF ExposureRF Exposure Info2015-03-05PDF 124.6 KB
Block Diagram Metadata onlyBlock DiagramPDF 72.7 KB
Schematics Metadata onlySchematicsPDF 339.2 KB
Circuit Description Metadata onlyOperational DescriptionPDF 95 KB

Application Information

Application IDlFAU6fhnlad5wpxgDbGE1A==
Final Action Date2016-04-12
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0017645623
ModelDH301
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWireless N300 ADSL2+ High Power Modem Router & DH301
Responsible PartyShen Yue, Engineer, cert@tenda.cn , 86-755-27657098
Test FirmJohn Chan, Bay Area Compliance Laboratories Corp. (Dongguan), john.chan@baclcorp.com , 86-769-86858888
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. Device is an 802.11b/g/n wireless broadband router operating in a 2x2 Spatial Multiplexing MIMO configuration described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth mode. Class II Permissive Change described in this filing.

Applications

Application IDDatePurpose
lFAU6fhnlad5wpxgDbGE1A==2016-04-12Class II permissive change or modification of presently authorized equipment
UnPvAJdTxaDCydVEFV7iPg==2015-03-05Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.18215C68, CC
2412-2462 MHz0.18215C68, MO
2422-2452 MHz0.14215C38, CC
2422-2452 MHz0.14215C68, MO

Grants

TCB Grant - Application UnPvAJdTxaDCydVEFV7iPg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 03/05/2015

Application Dated: 03/05/2015
SHENZHEN TENDA TECHNOLOGY CO., LTD.
6-8 Floor, Tower E3,
No. 1001, Zhongshanyuan Road,Nanshan District,
Shenzhen, 518052
China
 
Attention: Shen Yue , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  V7TDH301
Name of Grantee:  SHENZHEN TENDA TECHNOLOGY CO., LTD.
Equipment Class: Digital Transmission System
Notes: Wireless N300 ADSL2+ High Power Modem Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
68 MO 15C 2412.0  -  2462.0 0.182  
68 MO 15C 2422.0  -  2452.0 0.142  

Output power listed is conducted. Device is an 802.11b/g/n wireless broadband router operating in a 2x2 Spatial Multiplexing MIMO configuration described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth mode.

68: This grant does not pertain to equipment approval requirements under Part 68.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application UnPvAJdTxaDCydVEFV7iPg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

SHENZHEN TENDA TECHNOLOGY CO., LTD.
6-8 Floor, Tower E3, No. 1001, Zhongshanyuan Road,Nanshan District,
Shenzhen, 518052
China
  Date of Grant: 03/05/2015

Application Dated: 03/05/2015
 
Attention: Shen Yue , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  V7TDH301
Name of Grantee:  SHENZHEN TENDA TECHNOLOGY CO., LTD.
Equipment Class: Digital Transmission System
Notes: Wireless N300 ADSL2+ High Power Modem Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
68 MO 15C 2412.0  -  2462.0 0.182  
68 MO 15C 2422.0  -  2452.0 0.142  

Output power listed is conducted. Device is an 802.11b/g/n wireless broadband router operating in a 2x2 Spatial Multiplexing MIMO configuration described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth mode.


68: This grant does not pertain to equipment approval requirements under Part 68.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application lFAU6fhnlad5wpxgDbGE1A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 04/12/2016

Application Dated: 04/12/2016
SHENZHEN TENDA TECHNOLOGY CO., LTD.
6-8 Floor, Tower E3,
No. 1001, Zhongshanyuan Road,Nanshan District,
Shenzhen, 518052
China
 
Attention: Shen Yue , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  V7TDH301
Name of Grantee:  SHENZHEN TENDA TECHNOLOGY CO., LTD.
Equipment Class: Digital Transmission System
Notes: Wireless N300 ADSL2+ High Power Modem Router & DH301
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
68 CC 15C 2412.0  -  2462.0 0.182  
38 CC 15C 2422.0  -  2452.0 0.142  

Output power listed is conducted. Device is an 802.11b/g/n wireless broadband router operating in a 2x2 Spatial Multiplexing MIMO configuration described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth mode. Class II Permissive Change described in this filing.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
68: This grant does not pertain to equipment approval requirements under Part 68.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application lFAU6fhnlad5wpxgDbGE1A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

SHENZHEN TENDA TECHNOLOGY CO., LTD.
6-8 Floor, Tower E3, No. 1001, Zhongshanyuan Road,Nanshan District,
Shenzhen, 518052
China
  Date of Grant: 04/12/2016

Application Dated: 04/12/2016
 
Attention: Shen Yue , Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  V7TDH301
Name of Grantee:  SHENZHEN TENDA TECHNOLOGY CO., LTD.
Equipment Class: Digital Transmission System
Notes: Wireless N300 ADSL2+ High Power Modem Router & DH301
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
68 CC 15C 2412.0  -  2462.0 0.182  
38 CC 15C 2422.0  -  2452.0 0.142  

Output power listed is conducted. Device is an 802.11b/g/n wireless broadband router operating in a 2x2 Spatial Multiplexing MIMO configuration described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth mode. Class II Permissive Change described in this filing.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
68: This grant does not pertain to equipment approval requirements under Part 68.
CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: