FCC ID V95-WISWIFI
WiFi and Bluetooth Module
by Viconics Electronics Inc.
Grantee Code: V95 Product Code: WISWIFI
Latest application date: 2015-12-22
Device Images
FCC ID Device Details
| FCC ID | V95-WISWIFI |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | V95 |
| Product Code | WISWIFI |
| Applicant Business | Viconics Electronics Inc. 🇨🇦 |
| Related Domains |  schneider-electric.com |
| Equipment Class | WiFi and Bluetooth Module |
| Test Firm | Global EMC Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2015-12-22 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2015-12-22 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2015-08-13 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2015-08-13 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18SBMOD Grant Date: 02/03/2014 | 2015-07-31 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18SBMOD Grant Date: 02/03/2014 | 2015-07-31 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Internal Photos | Internal Photos | 2015-12-22 | PDF 513.2 KB |
| Internal Photos Showing Reference Trace | Internal Photos | 2015-08-13 | PDF 441.2 KB |
| Internal Photos of Ref Trace | Internal Photos | 2015-08-13 | PDF 441.2 KB |
| Internal Photos | Internal Photos | 2015-07-31 | PDF 272.9 KB |
| External Photos | External Photos | 2015-07-31 | PDF 36.3 KB |
| Label Info R3 | ID Label/Location Info | 2015-07-31 | PDF 96.5 KB |
| Test Photos | Test Setup Photos | 2015-12-22 | PDF 721.8 KB |
| Test Photos in Host | Test Setup Photos | 2015-12-22 | PDF 721.8 KB |
| Test Photos | Test Setup Photos | 2015-08-13 | PDF 421.9 KB |
| Test Report R3 | Test Report | 2015-12-22 | PDF 1.4 MB |
| Test Report Rev 3 | Test Report | 2015-12-22 | PDF 1.4 MB |
| Test Report Rev 2 | Test Report | 2015-08-13 | PDF 1.2 MB |
| Auth Letter | Cover Letter(s) | 2015-12-22 | PDF 119 KB |
| Authorization Letter | Cover Letter(s) | 2015-12-22 | PDF 119 KB |
| PC Cover Letter | Cover Letter(s) | 2015-12-22 | PDF 104.5 KB |
| Authorization Letter | Cover Letter(s) | 2015-08-13 | PDF 119 KB |
| Confidentiality Letter | Cover Letter(s) | 2015-08-13 | PDF 194.5 KB |
| PC Cover Letter Rev 3 | Cover Letter(s) | 2015-08-13 | PDF 261.5 KB |
| PC Letter Rev 3 | Cover Letter(s) | 2015-08-13 | PDF 261.5 KB |
| Change in ID Letter | Cover Letter(s) | 2015-07-31 | PDF 184.3 KB |
| TI Authorization Letter R3 | Cover Letter(s) | 2015-07-31 | PDF 22.9 KB |
| Block Diagram Regarding Sample Use of EUT in Final Device Metadata only | Block Diagram | PDF 126 KB | |
| Schematics and Reference Trace Info Metadata only | Schematics | PDF 488.8 KB | |
| BOM Regarding Sample Use of EUT in Final Device Metadata only | Parts List/Tune Up Info | PDF 317.7 KB |
Application Information
| Application ID | fA/B2i/9SDFaFnUxmudMdQ== |
|---|---|
| Final Action Date | 2015-12-22 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0017728593 |
| Model | WISWIFI |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | WiFi and Bluetooth Module |
| Responsible Party | Emmanuel Stathopoulos, Certification, emmanuel.stathopoulos@schneider-electric.com , 514-321-5660 |
| Technical Contact | Emmanuel Stathopoulos, Viconics Technologies Inc., emmanuel.stathopoulos@schneider-electric.com , 514-321-5660 |
| Non-Technical Contact | Emmanuel Stathopoulos, Viconics Technologies Inc., emmanuel.stathopoulos@schneider-electric.com , 514-321-5660 |
| Test Firm | Scott Drysdale, Global EMC Inc., sdrysdale@globalemclabs.com  , 4506874976 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Limited Modular Approval. Power listed is maximum combined conducted output power. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Device operates with specific antennas in MIMO configurations as described in filing under this FCC ID. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 1.22 dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. LMA approval is for the module to utilize an LMA approval to allow a different reference trace, turn off Bluetooth functionality, and use a reduced subset of originally approved functionality. This Permissive Change removes a secondary shield from the host that was previously incorporated over the module. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| fA/B2i/9SDFaFnUxmudMdQ== | 2015-12-22 | Class II permissive change or modification of presently authorized equipment |
| Wgkt8FVe9G2PYkF49unc2Q== | 2015-12-22 | Class II permissive change or modification of presently authorized equipment |
| wou5MAwm7ds6VH4ZTOzOpA== | 2015-08-13 | Class II permissive change or modification of presently authorized equipment |
| u9BKaRKjlLmAVdjmEpGI0w== | 2015-08-13 | Class II permissive change or modification of presently authorized equipment |
| ygCnAg26Px6JPbH/DLUkIA== | 2015-07-31 | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18SBMOD Grant Date: 02/03/2014 |
| MfO3quwftCmFHvVwimHfKw== | 2015-07-31 | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18SBMOD Grant Date: 02/03/2014 |
Equipment Authorization
Grants
TCB Grant - Application ygCnAg26Px6JPbH/DLUkIA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 07/31/2015 Application Dated: 07/31/2015 |
| Viconics Electronics Inc. |
| 9245 Langelier Blvd. |
| Montreal, H1P 3K9 Canada |
| Attention: Emmanuel Stathopoulos , Certification |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | V95-WISWIFI |
| Name of Grantee: | Viconics Electronics Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0173 |
| Single Modular Approval. Power listed is conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of -0.36dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
EAS Grant - Application ygCnAg26Px6JPbH/DLUkIA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Viconics Electronics Inc. 9245 Langelier Blvd. Montreal, H1P 3K9 Canada |
Date of Grant: 07/31/2015 Application Dated: 07/31/2015 |
| Attention: Emmanuel Stathopoulos , Certification |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | V95-WISWIFI |
| Name of Grantee: | Viconics Electronics Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0173 |
| Single Modular Approval. Power listed is conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of -0.36dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 08/13/2015 Application Dated: 08/13/2015 |
| Viconics Electronics Inc. |
| 9245 Langelier Blvd. |
| Montreal, H1P 3K9 Canada |
| Attention: Emmanuel Stathopoulos , Certification |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | V95-WISWIFI |
| Name of Grantee: | Viconics Electronics Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 15C | 2402.0 - 2480.0 | 0.01 | ||
| MO | 15C | 2412.0 - 2462.0 | 0.2438 | ||
| MO | 15C | 2422.0 - 2452.0 | 0.1052 |
| Single Limited Modular Approval. Power listed is maximum combined conducted output power. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Device operates with specific antennas in MIMO configurations as described in filing under this FCC ID. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna (s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 1.22dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. This Permissive Change is for the module to utilize an LMA approval to allow a different reference trace, turn off Bluetooth functionality, and use a reduced subset of originally approved functionality. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application wou5MAwm7ds6VH4ZTOzOpA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Viconics Electronics Inc. 9245 Langelier Blvd. Montreal, H1P 3K9 Canada |
Date of Grant: 08/13/2015 Application Dated: 08/13/2015 |
| Attention: Emmanuel Stathopoulos , Certification |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | V95-WISWIFI |
| Name of Grantee: | Viconics Electronics Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 15C | 2402.0 - 2480.0 | 0.01 | ||
| MO | 15C | 2412.0 - 2462.0 | 0.2438 | ||
| MO | 15C | 2422.0 - 2452.0 | 0.1052 |
| Single Limited Modular Approval. Power listed is maximum combined conducted output power. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Device operates with specific antennas in MIMO configurations as described in filing under this FCC ID. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna (s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 1.22dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. This Permissive Change is for the module to utilize an LMA approval to allow a different reference trace, turn off Bluetooth functionality, and use a reduced subset of originally approved functionality. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/22/2015 Application Dated: 12/10/2015 |
| Viconics Electronics Inc. |
| 9245 Langelier Blvd. |
| Montreal, H1P 3K9 Canada |
| Attention: Emmanuel Stathopoulos , Certification |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | V95-WISWIFI |
| Name of Grantee: | Viconics Electronics Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0173 |
| Single Limited Modular Approval. Power listed is conducted. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of -0.36dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. LMA approval is for the module to utilize an LMA approval to allow a different reference trace, turn off Bluetooth functionality, and use a reduced subset of originally approved functionality. This Permissive Change removes a secondary shield from the host that was previously incorporated over the module. |
EAS Grant - Application Wgkt8FVe9G2PYkF49unc2Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Viconics Electronics Inc. 9245 Langelier Blvd. Montreal, H1P 3K9 Canada |
Date of Grant: 12/22/2015 Application Dated: 12/10/2015 |
| Attention: Emmanuel Stathopoulos , Certification |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | V95-WISWIFI |
| Name of Grantee: | Viconics Electronics Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0173 |
| Single Limited Modular Approval. Power listed is conducted. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of -0.36dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. LMA approval is for the module to utilize an LMA approval to allow a different reference trace, turn off Bluetooth functionality, and use a reduced subset of originally approved functionality. This Permissive Change removes a secondary shield from the host that was previously incorporated over the module. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 08/13/2015 Application Dated: 08/13/2015 |
| Viconics Electronics Inc. |
| 9245 Langelier Blvd. |
| Montreal, H1P 3K9 Canada |
| Attention: Emmanuel Stathopoulos , Certification |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | V95-WISWIFI |
| Name of Grantee: | Viconics Electronics Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0173 |
| Single Limited Modular Approval. Power listed is conducted. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of -0.36dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This Permissive Change is for the module to utilize an LMA approval to allow a different reference trace, turn off Bluetooth functionality, and use a reduced subset of originally approved functionality. |
EAS Grant - Application u9BKaRKjlLmAVdjmEpGI0w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Viconics Electronics Inc. 9245 Langelier Blvd. Montreal, H1P 3K9 Canada |
Date of Grant: 08/13/2015 Application Dated: 08/13/2015 |
| Attention: Emmanuel Stathopoulos , Certification |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | V95-WISWIFI |
| Name of Grantee: | Viconics Electronics Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0173 |
| Single Limited Modular Approval. Power listed is conducted. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of -0.36dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This Permissive Change is for the module to utilize an LMA approval to allow a different reference trace, turn off Bluetooth functionality, and use a reduced subset of originally approved functionality. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 07/31/2015 Application Dated: 07/31/2015 |
| Viconics Electronics Inc. |
| 9245 Langelier Blvd. |
| Montreal, H1P 3K9 Canada |
| Attention: Emmanuel Stathopoulos , Certification |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | V95-WISWIFI |
| Name of Grantee: | Viconics Electronics Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 15C | 2402.0 - 2480.0 | 0.01 | ||
| MO | 15C | 2412.0 - 2462.0 | 0.2438 | ||
| MO | 15C | 2422.0 - 2452.0 | 0.1052 |
| Single Modular Approval. Power listed is maximum combined conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna (s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 1.22dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application MfO3quwftCmFHvVwimHfKw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Viconics Electronics Inc. 9245 Langelier Blvd. Montreal, H1P 3K9 Canada |
Date of Grant: 07/31/2015 Application Dated: 07/31/2015 |
| Attention: Emmanuel Stathopoulos , Certification |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | V95-WISWIFI |
| Name of Grantee: | Viconics Electronics Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 15C | 2402.0 - 2480.0 | 0.01 | ||
| MO | 15C | 2412.0 - 2462.0 | 0.2438 | ||
| MO | 15C | 2422.0 - 2452.0 | 0.1052 |
| Single Modular Approval. Power listed is maximum combined conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna (s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 1.22dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 12/22/2015 Application Dated: 12/10/2015 |
| Viconics Electronics Inc. |
| 9245 Langelier Blvd. |
| Montreal, H1P 3K9 Canada |
| Attention: Emmanuel Stathopoulos , Certification |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | V95-WISWIFI |
| Name of Grantee: | Viconics Electronics Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 15C | 2402.0 - 2480.0 | 0.01 | ||
| MO | 15C | 2412.0 - 2462.0 | 0.2438 | ||
| MO | 15C | 2422.0 - 2452.0 | 0.1052 |
| Single Limited Modular Approval. Power listed is maximum combined conducted output power. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Device operates with specific antennas in MIMO configurations as described in filing under this FCC ID. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 1.22 dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. LMA approval is for the module to utilize an LMA approval to allow a different reference trace, turn off Bluetooth functionality, and use a reduced subset of originally approved functionality. This Permissive Change removes a secondary shield from the host that was previously incorporated over the module. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application fA/B2i/9SDFaFnUxmudMdQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Viconics Electronics Inc. 9245 Langelier Blvd. Montreal, H1P 3K9 Canada |
Date of Grant: 12/22/2015 Application Dated: 12/10/2015 |
| Attention: Emmanuel Stathopoulos , Certification |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | V95-WISWIFI |
| Name of Grantee: | Viconics Electronics Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 15C | 2402.0 - 2480.0 | 0.01 | ||
| MO | 15C | 2412.0 - 2462.0 | 0.2438 | ||
| MO | 15C | 2422.0 - 2452.0 | 0.1052 |
| Single Limited Modular Approval. Power listed is maximum combined conducted output power. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Device operates with specific antennas in MIMO configurations as described in filing under this FCC ID. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 1.22 dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. LMA approval is for the module to utilize an LMA approval to allow a different reference trace, turn off Bluetooth functionality, and use a reduced subset of originally approved functionality. This Permissive Change removes a secondary shield from the host that was previously incorporated over the module. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |